This standard specifies the basic types and rated lifting capacity series of lifting vehicles. This standard applies to lifting vehicles powered by human power, internal combustion engines and electric motors. JB/T 7313-1994 Basic types and rated lifting capacity of lifting vehicles JB/T7313-1994 Standard download decompression password: www.bzxz.net
Some standard content:
Mechanical Industry Standard of the People's Republic of China JB/T7313-94 Lifting Vehicle Basic Type and Rated Lifting Weight Series Published on July 18, 1994 Ministry of Machinery Industry of the People's Republic of China Implementation on July 1, 1995 Mechanical Industry Standard of the People's Republic of China Lifting Vehicle Basic Type and Rated Lifting Weight Series 1 Subject Content and Scope of Application This standard specifies the basic type and rated lifting weight series of lifting vehicles. This standard applies to lifting vehicles with human power, internal combustion engines and electric motors as power sources. 2 Basic Type The basic types of lifting vehicles are shown in the table below. Stacking (high-lift) vehicles Lifting vehicles Non-stacking vehicles Rated lifting weight series The rated lifting weight series of lifting vehicles are: counterbalanced forklifts reach forklifts forklifts pallet stacker platform stacker JB/T 7313--94 『Forward-moving mast Forklift forward-moving Vehicles with liftable operating position Side-mounted forklift Off-road forklift Side-mounted stackerbZxz.net Three-way stacker Telescopic forklift Pallet truck Platform truck Non-stacking straddle truck Sorting truck 0,20.0.25.0.32,0 .40.0.50,0.63,0.80,1.0,1.25,(1.5),1.6,(1.75).2.0,(2.25).2.5.(2.75),3.0.3.5,4.0.4.5.5.0.5.5.6.0.7.0,8.0.9.0,10,12.14.(15).16.18.20.22.25.28.32.37.(38).42t,Note: The values in brackets are not preferred. Approved by the Ministry of Machinery Industry on July 18, 1994 Implemented on July 1, 1995 Additional Notes: JB/T731394 This standard is proposed and managed by the Beijing Hoisting and Conveying Machinery Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Forklift Branch of Beijing Hoisting and Conveying Machinery Research Institute. The main drafter of this standard is Teng Xing. Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.