title>GB/T 5493-1985 Grain and oil inspection types and intermixing inspection methods - GB/T 5493-1985 - Chinese standardNet - bzxz.net
Home > GB > GB/T 5493-1985 Grain and oil inspection types and intermixing inspection methods
GB/T 5493-1985 Grain and oil inspection types and intermixing inspection methods

Basic Information

Standard ID: GB/T 5493-1985

Standard Name: Grain and oil inspection types and intermixing inspection methods

Chinese Name: 粮食、油料检验 类型及互混检验法

Standard category:National Standard (GB)

state:Abolished

Date of Release1985-01-01

Date of Implementation:1986-07-01

Date of Expiration:2009-01-20

standard classification number

Standard ICS number:Food Technology >> 67.040 Food Comprehensive

Standard Classification Number:Food>>Food Processing and Products>>X10 Food Processing and Products Comprehensive

associated standards

alternative situation:Replaced by GB/T 5493-2008

Publication information

other information

Release date:1985-11-02

Review date:2004-10-14

Drafting unit:Grain Storage and Transportation Bureau, Ministry of Commerce

Focal point unit:National Technical Committee on Grain and Oil Standardization

Publishing department:National Bureau of Standards

competent authority:State Grain Administration

Introduction to standards:

This standard applies to the inspection of commodity grains and oilseeds types and their mixing. Different methods should be adopted according to different requirements. GB/T 5493-1985 Grain and oilseed inspection types and mixing inspection methods GB/T5493-1985 standard download decompression password: www.bzxz.net

Some standard content:

Standard Announcement
China Standardization 2006.07
GB/T5493-1985 "Grain and Oil Inspection Types and Mixing Inspection Methods" National Standard No. 1 Amendment This amendment has been approved by the National Standardization Administration on June 9, 2006, and will be implemented from July 1, 2006.
The corrections are as follows:
a. Change the first line of Article 2.1: wwW.bzxz.Net
"The middle part of the grain can be cut off" to "The middle part of the grain can be cut off horizontally". b. Change the first line of Article 2.1:
"The glassy transparent body is the hard part\" to "The glassy transparent body and the translucent body are the hard part" Published in the 7th issue of "China Standardization" in 200646
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.