Some standard content:
GB/T17302.2--1998
This standard is formulated in accordance with the application level rules and message design guidelines and rules of UN/EDIFACT standards, and in accordance with GB/T15311.2--1994 Export License Format of the People's Republic of China and actual management requirements. This standard is used in conjunction with other UN/EDIFACT standards, and adopts the UN/EDIFACT D.96B version of the segment directory, composite data element directory, data element directory, code table and other standards and relevant national standards. The message type code is NEXI[, and this standard is proposed by the Ministry of Foreign Trade and Economic Cooperation. This standard is drafted by the International Trade EI Service Center of the Ministry of Foreign Trade and Economic Cooperation, the Quota License Affairs Bureau and the China Institute of Standardization and Information Classification and Coding.
The main drafters of this standard are Shi Li, Meng Zhuming, Zhan Fudong, Liu Bisong, Shi Wenlai, Zhou Ti, and Dai Changxi. 1 Scope
National Standard of the People's Republic of China
Export license message of the People's Republic of China1.1 Scope of application
This standard applies to the electronic data exchange for the management and use of export licenses in international trade. 1.2 Original
GB/T17302.2—1998
Export licenses are issued by the issuing authority in accordance with regulations and the application of exporters, and are used for the management of export licensed goods, export customs declaration and export settlement.
Export licenses can be used 1 or more times according to regulations, but not more than 12 times. Each use must be endorsed and cancelled by the exporter, and the number of unused export licensed goods can be reduced. - Export licenses can include additional information for the statistics of issuing export licenses. - Export licenses can include notes and instructions of the issuing authority. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T2659-94 World Country and Region Name Code (cqvISO3166: 1993) GB6512-86 Transport Mode Code
GI3/T12406-1996 Code for Indicating Markets and Funds (idtISO4217: 1995) GB/T11805-1993 Application Level Syntax Standard for Electronic Data Interchange in Administration, Commerce and Transport (idtISO9735: 1988)
GB/T1491594 Electronic Data Interchange Terminology||tt ||GB/T15191-1997 Standard data element for trade data entry (idtISO7372:1993) GB/T15311.2-94 Export license format of the People's Republic of China GB/T15421--94 International trade method code
GB/T15422-94 International trade document code GB/T15514-1998 Code for the export and relevant locations of the People's Republic of China GB/T15634-1995 Segment directory for electronic data interchange for administration, commerce and transport GB/T 15635.-1995
Composite data for electronic data interchange for administration, commerce and transportGB/T15947--1995
Guidelines and rules for message design for electronic data interchange for administration, commerce and transportGB/T 16833-1997
GB/T 16962-1997
Code table for electronic data interchange for administration, commerce and transportInternational trade payment method code
GB/T 16963--1997
International trade contract code specification
GB/T 17295—1998 Codes of Units of Measurement for International Trade Containing International Trade Numbers Batch Interchange Record (IINTDID)
3 Message Structure
Position Identifier
Header Section
Detail Section
Summary Section
Segment Group 1
Segment Group 2
GB/T 17302.2—1998
Message beginning
Date/time/limit
Name and address
Goods clearance status
Transport details
Place/location identification
Document/message details
Free text
Monetary amount
Free text
Section control
Control total
Monetary amount
Free text
Message end
Note: In the "status" identification, M is mandatory and C is required. 4 Segment Description
Header Section
UNII Message Header
Number of Repetitions
Starts and uniquely identifies the service segment of the message. The type code of this message is "CVEXLI". BCM message starts
Used to uniquely identify the export license compilation and message function: [)TM Date/Time/Expiration
Used to identify the export license issuance date, the export license expiration date and the export license deletion or shipment date. The first appearance is the export license issuance date, the second appearance is the export license expiration date, and the third appearance is the export license deletion or shipment date. NAD Name and Address
Used to identify the name and code of the exporter and consignor and the name of the visa authority. Use C082 and unstructured 0050
Details
Summary
5-segment format
CST Goods Customs Clearance Status
GB/T 17302.2--1998
Used to identify the trade method, payment method and export commodity code specified in the contract. TDT Transport Details
Used to identify the mode of transportation used when the goods leave the country. A maximum of two modes of transportation can be used. LOC Location/Position Code
Used to identify the name of the customs declaration port where the exporter declares the goods when they are exported and the country or region where the consignor and its agent receive the goods as stipulated in the contract when they are shipped. A maximum of three customs declaration ports can be used. DOC Documents/Message Details
Used to identify the documents (documents) attached to the application for export license and their document (document) numbers. FTX Free Text
Used to identify the name of the exported commodity.
Segment Group 01-LIN-MEA-MUA FTX
Used to identify the specification, grade, unit, quantity, unit price, total amount, and total amount in US dollars for each export commodity. LIN Sub-item
Used to identify the consecutive number of each export commodity. MEA
Used to identify the unit of measurement and its value of a commodity for which an export license is applied. MOA Monetary Amount
Used to identify the monetary value of a commodity for which an export license is applied, including unit price, total amount, and total amount in US dollars. The first occurrence is the unit price, the second occurrence is the total amount, and the third occurrence is the total amount in US dollars. FTX Free Text
Used to identify the specification and grade of a commodity for which an export license is applied. UNS Section Control
Used to separate the item section from the summary section.
CNT Control Total
Used to provide the total number of message sub-item control, provided by the sender for the convenience of the receiver to verify. Segment group 02-MEA-MOA
is used to identify the total quantity, total amount and total amount converted to US dollars of the exported goods. MEA
is used to identify the unit of measurement and total quantity of the goods for which an export license is applied. MOAbzxZ.net
is used to identify the total monetary value of all goods for which an export license is applied, including the total amount and the total amount converted to US dollars. The first occurrence is the total amount and the second occurrence is the total amount converted to US dollars. FTX
is used to identify the remarks made by the certification authority. UNT
ends the message, gives the number of segments and the control reference number of the message. This chapter is used to describe each segment of this standard: lists the status, type and length of the data segment in UN/EDIFACT and the corresponding segment in this standard
GB/T 17302.21998
Each segment is listed in the order in which it appears in the message. After the segment or segment group tag is the M (mandatory)/C (conditional) indicator, the maximum number of repetitions, and the segment description.
From left to right, the first column is the data element tag and name, and the second column is the status of the data element in EDIFACT (M or C).Type and length. The above letters constitute the original EDIFACT segment format definition. The third and fourth columns are specific information for this standard. The third column is the status indicator for the use of EDIFACT data elements, and the fourth column is the code value used for the specific data element in the description and message. In addition to the code values in GB/T16833-1997, this standard also uses national standard codes and MOFTEC codes. When the national standard code is used, its standard release number is listed in the segment notes. When the code in GB/T 16833-1997 and the MOFTEC code are used, their specific code values are listed in the fourth column. The mandatory (M) data element in the EDIFACT segment remains unchanged in this standard. The conditional (C) data element in the EDIFACT segment has no further agreed upon three states in this standard according to actual business needs, and can be represented by abbreviations, which are listed as follows: Mandatory M indicates that the data element is required and must be sent. Conditional C indicates that the data element is optional and can be sent based on user opinions. - Unused N indicates that the data element is not used and should be omitted. If a polyphonic data element is marked as N+, all data elements in it are assigned a blank status indicator. Abbreviation:
SG: abbreviation of segment group DE: abbreviation of data element Table 1
UNH message header
Function: start, identify and define the message. Status: M
Number of Repetitions: 1
EDIFACT
0062 Message Reference Number
S009 Message Identifier
0065 Message Type Identifier
0052 Message Type Version Number
0054 Message Type Release Number
0051 Management Authority
0057 Authority Assigned Code
0068 Public Access Reference
S010 Delivery Status
0070 Sequence Message Delivery Number
0073 First/Last Sequence Message Delivery Indication
Section Note:
This standard
Unique message reference of the sender, sequence number of the message in the exchange. It has the same value as [E0062 in UNT and is generated by the sender.
CNEXLI=Export License of the People's Republic of China
DE0065, 0052, 0054 and 0051 indicate that the message is the first edition of the export license document issued in 1998 and managed by the Ministry of Foreign Trade and Economic Cooperation (MFT).
For example:
IINH+MFA0O1+CNFXILD8LMET message reference is MEO00I's export license management agency is the list
BGM message starts
GB/T 17302.2--- 1998
Function, indicating the message type and function start transmission identification number. Status: M
Repeat count, 1
EDIFACT
C002 Document (document)/message name
1001 Document (document)/message name, code
1131 Code table qualifier
3055 Code table responsible organization code type
1000 Document (document)/message name
C106 Document (document) message identifier
1004 Document (document)/message number
1056 Version
1060 Revision number
1225 Message function, code type
4343 Response type, code type
Segment note:
M an12
811=.Export license
License number is assigned by the issuing authority
1-cancel
5=replace
-original
IF1001 document name code adopts G/T 15122-94. In this standard, 811 can be used. In DE1225, different values are used depending on the purpose of the message. Cancel is used to indicate the deletion of the certificate. Generally, when the company returns the certificate, modifies the certificate, the management authority declares the certificate invalid, or there is an error in the certificate, the deletion of the certificate is adopted; substitute is used to indicate the situation of handling the shipment number: the code is blank, indicating normal issuance.
For example:
BCM+811+97-AII-100521+1" The license number is 97-AH-100521. This license is a deleted fraudulent license. H Period/Time/Expiration
Function: Indicates the period and/or period.
Status: M
Number of repeats: 3
(:507 Date/Time/Expiration
2005 Period/Time/Expiration Qualifier
2380 Date/Time/Expiration
GB/T 17302.2—1998
FDTFACT
237911 Time/term format limit, 3 characters
paragraph explanation:
This standard
137=Document period indicates the export license issuance period
147=Export license effective expiration period
9-Processing period" indicates the period of deleting the license or processing the shipment
l5l--yymrrrlh
This paragraph is used to identify the export license issuance date, effective expiration date and deleting the license or processing the shipment date. [2005 Different values indicate different periods of the license. When the message is When the function of the message is to cancel or replace, the export license issuance period is the same as the export license cancellation or processing period.
DE2379 selects code 101. That is, the license date is expressed in the unified format of yymmdd. For example:
DTM+137;970512:101 means that the license issuance period is May 12, 2008 11M+147:971013:101' means that the license is valid until October 13, 2008 13PTM+9;971126:101 means that the license is deleted or processed for November 11, 2008 Table 4
NAD Name and Address
Function: Description of the name/address and its associated function, may be used alone C082 and/or unstructured (058 or structured C080 Room 3207
Status; M
Number of repetitions: 3
EDIFACT
3035 Party qualifier
C082 Participant identification details
This standard
EX—Exporter
C2—ConsignorA
MS Document/message issuer/sender indicates visa agency
3039 Party identification
1131 Code table qualification box
3055 Code table responsible organization, code type
C058 Name and address
3124 Name and address line
3124 Name and address line
3124 Name and address line
3124 Name and address line
3124 Name and address line
C080 Party name
3036 Party name
3036 Party name
3036 Party name
3036 Party name
3045 Party name in coded format
C059 Street
302 Street name and house number abbreviation/postal code
CB/T 17302-2--1998
Table 4 (Complete)
FDJFACT
C all..35
C an.. 35
Government mailbox
8042 Street name and house number/postal code a.，35 Government mailbox
3042 Street name and house number/postal code
Government mailbox
3042 Street name and house number/postal code Can.35 Government mailbox
3164 City name
3229 National administrative region logo
3251 Postal code
3207 Home, Code type
Segment notes:
This standard recommends
M an13
C an..35
Exporter code
Shipper code
160-Party identification company abbreviation
MFT=Ministry of Foreign Trade and Economic Cooperation
Exporter name
Shipper name
Name of visa authority
This section is used to identify the trade parties and visa authorities involved in the export license message. When it is necessary to identify the trade parties, C082 must be used to identify their codes, and C058 can be omitted; when identifying the visa authority, C082 is not used, and the name is given by unstructured C058. LE3039 uses the import and export enterprise code.
For example:
NAJ+FX+3302144075490:160:MFTThe exporter is Ningbo Textile United Import and Export Corporation: its enterprise code is 3302144075490
CSTGoods customs clearance status
GB/T17302.2--1998
Function: Use customs identification to indicate the status and purpose of goods, status; M
Number of re-images: 1
EDIFACT
1496Goods item number
C246Customs goods code (commodity)
7361Customs code identification
1131 Code table qualifier
3055 Code table responsible agency, code type
C246 Customs goods code
7361 Customs code identification
1131 Code table qualifier
3055 Code table responsible agency, code type
C246 Customs goods code
7361 Customs code identification
1131 Code table qualifier
3055 Code table responsible agency tree·Code type
C246 Customs goods code
7361 Customs code identification
1131 Code table qualifier
3055 Code table responsible agency, code type
(246 Customs goods code
736 Customs code identification
1131 Code table qualifier
3055 Code table responsible organization, code type
Segment notes:
Whose code is this
Trade method code
105-Customs declaration type indicates trade method GB
Payment method code
153=Payment method
Commodity code
HS code
Man.. lo
122=Commodity
CNC=China Customs Code
This segment is used to identify the export trade method, payment method and the code of the exported commodity. DE7361 is used to identify the specific code of the trade method, payment method and export commodity. The trade method code adopts GB/115421-94, the payment method code adopts GB/T16962-1997, and the commodity code adopts HS code, which is 8 or 10 digits long. DE11 31 The following identifier is used to represent the trade method, payment method or commodity code of this composite data element. For example:
CST+1+10:105:GB+1:153;GB+2003101001:122:CNC The item number of the goods is 1, the trade method is general trade (the general trade code is 10), the payment method is letter of credit (the letter of credit code is 1), and the export commodity code is 2003101001TDT Transport Details
GB/T 17302.21998
Function: Describe the details of the transport, such as the transport method, the transport worker, the transport guide and the transport worker are standard training! Status, M
Number of repetitions: 2
EDIFACT
8051 Transport segment qualifier
8028 Transport reference
C220 Mode of transport
8067 Mode of transport, code type
8066 Mode of transport
C228 Means of transport
8179 Means of transport type identification
8178 Transport vehicle type
CO40 Carrier
3127 Carrier identification
1131 Code table qualifier||t t||3055 Code table responsible organization, code type
3128 Carrier name
8101 Conveyor question: code type
C401 Additional transportation information
8457 Additional transportation reason, code type
8459 Additional transportation responsibility, code type
7130 Customer authorization number
+C222 Transportation identification
8218 Transportation vehicle identification identification
1131 Code table qualifier
3055 Code table responsible organization, code type
8212 Transport vehicle identification
8453 Transport vehicle nationality, code type
8281 Transport ownership
Paragraph notes:
Can,,?
.Can..3
This standard
M atil
20=Ten-line transport
Transport mode code
This paragraph is used to identify the mode of transport used when the goods leave the country to go abroad. It can be used up to twice, that is, up to two modes of transport are allowed.
DE8067 identifies the mode of transport code. The code principle is to use GH/T65121997. However, the multimodal transport code in the code is not allowed. If two modes of transport need to be indicated, this paragraph can be used twice to identify them separately. For example:
TDT+20++
The mode of transport is sea transport
T'r+ 20++ 4
The mode of transport is air transport
mLOCLocation/location chain identification
GB/T 17302.2—1998
Function: identification of country/location/position/first relevant position/second relevant position, status: M
Number of repetitions: 4
EDIFACT
3227Location/location qualifier
C517 Location identification
3225Location/location date
1131 Representative qualifier
3055 Code table responsible organization, code type
3224Location/location
[519 First relevant location identifier
3223 First relevant place/location identifier
1131 Code table qualifier
305, code table responsible agency, code type
8222 First customs location/position
'553 Second customs location identifier
3233 Second relevant point/location identifier
1131 Code table qualifier
305: code table responsible agency, code type
3232 First relevant place/location
5479 relationship, code type
Section note:
C al1..70
This paragraph
22-Customs clearance place indicates the customs declaration port
36=The most complete month indicates the import country (region) declaration port code, the length is an5
The import country (region) code, the length is an2
This paragraph identifies the customs declaration port and the importing country (region) of the goods. The customs declaration port can be used at most once, that is, at most one customs declaration port is allowed. The customs declaration port code adopts GB/T15511--1998+importing country (region) code and uses GB/T2659-94 cumulatively. Reverse:
LOC-22+CAXMV customs declaration is the port
［(C+36+AL export country is Australia
130C document (receipt)/document details
GB/T 17302.21998
Function: Identify the document (document) referenced in the provisions of the printed, electronically transmitted or received document description, and the transaction type identification related to this, which is referenced by this message.
Status: M
Number of repetitions; 1
EDIFACT
C02 Document (document)/Message name
1001 Document (document)/Message name, code
1131 Code table qualifier
3055 Code responsible organization, code type
1000 Document (document)/message name
C503 Document (document)/message details
1004 Document (document)/message number
1373 Document (document)/message status, code
1366 Document (document)/message source
3453 Language, Code type
3153 Communication channel compliance identifier, code type
1220 Number of required documents (documents)
1218 Number of original documents (documents) required
Paragraph note:
This standard
315=same
Contract number
This paragraph is used to identify the contract number, which is the contract number of the contract attached when applying for the license. For example:
DOC:+ 315+D197E005'
The contract number is IH97FC05
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.