GB/T 5094.1-2002 Structural principles and reference codes for industrial systems, devices and equipment and industrial products Part 1: Basic rules
Some standard content:
[:5 79. 020
National Standard of the People's Republic of China
CB/1 5094. 1—2002
idt IEC. 61346-1:1996
Industrial systems, installations and equipment and industrial products Strurturing principles and referentedesignations-Part 1: Basic rules
industrial systems, installations and guidance and industrial products Strurturing principles and referentedesignations-Part 1: Basic rules rules2002-08-05Promulgated
2003-01-01Implementation
People's Republic of China
National Quality Supervision, Inspection and Quarantine Administration
GB,T5094.1:2002
1EC Foreword
1 Specification
Applicable standards
4 Structural principles
5 Composition of reference code
Position code
Appendix A)
Reference code Examination of the basic requirements of the system on the necessary nature of the transfer example from one aspect to another
record prompt appendix)
Appendix core (prompt appendix 1 transfer example from one aspect to another, the small after the vertical representation method of the surface of the request)
system reference code example
Appendix (prompt appendix)
GB/T50941935 code
Appendix F (prompt appendix)
record ((prompt Appendix)
Cost code specified in this standard. GB/T50941985. IS03511 book 1S0/DS1279-1
Reference clause 1
CB/T5094.1-7002
This standard is equivalent to the International Electrotechnical Commission standard 1EC6131S-1:1996.T Industrial invoice system, packaging and equipment and industrial product structure principles and reference codes Part 1. This standard is a series of standards T/T5094 Industrial systems, devices and equipment shall be replaced by the first part of the industrial product structure and license code. GB/T5091-1985 core technical project code 3. The standard includes the following four parts: GB/T5094.1 Industrial systems, devices and equipment and industrial product structure rules and reference codes Part 1 Basic rules GB/T5094.2 Industrial systems, devices and equipment and industrial product structure principles and reference codes Part 2: Classification of items Classification code
G8/T: 504-3
Industrial systems, devices and equipment and industrial products in principle Part 3: Application guidelines GB/T504.4 Industrial systems. Installations and equipment and industrial products in principle and reference codes Part 1: Concepts and definitions
Appendix A, Appendix C, Appendix 1, Appendix E, Appendix F and Appendix G of this standard are the appendices proposed by the National Economic and Construction Product Committee. This standard is proposed by the National Technical Committee for Standardization of Gas Documents and Symbols. The responsible drafting units of this standard: North China Electric Power Design Institute, Mechanical and Electrical Research Institute. The main drafters of this standard are Wu Jiaye, Guo Jiang, Shang Zhongmin, Li Shilin, Li Ying, Xiang Zang: The first publication time of this standard is: 1935, GR/T5094.1-2002 IEC Foreword IEC) (International Electrotechnical Commission) is an international standardization organization composed of all national electrotechnical committees (IEC national committees). IEC's purpose is to publish international standards for this purpose and in accordance with other work needs through international cooperation on standardization issues in the field of electrotechnical engineering. The preparation of standards is entrusted to technical committees. We can join the national committees and participate in the preparation if we are interested in the subject under study. IEC has international cooperation with international organizations, governmental organizations and non-governmental organizations. IEC (19) cooperates closely under the conditions agreed by the two organizations. 2) Each technical committee has representatives of all interested countries to discuss new technical matters and to coordinate as accurately as possible the information on the subject under study. 3) The document is published in the form of a standard, technical report or guide for international use. The document is accepted by the national committees of all countries.
1) To promote uniformity. IF: Each national committee has the responsibility to apply international standards to national and regional standards. If there are differences between the corresponding national standards or regional standards, please inform the user later. If there are any ... Attention is drawn to the possibility of patent infringement of the contents of this standard. This does not imply any or all patent rights. This International Standard E61 was prepared by EC Technical Committee 10, with the preparation of the document by Subcommittee B on Graphical Symbols and Technical Committee 10 on Graphical Products and Related Documents. Formal voting took place only within the SC3 range. However, TC10 did not object to this original national standard. This standard repeals and replaces 1:50750, which was issued in 1983. The text of this standard is based on the following document: Draft International Standard
3/144/FL15
Information on the voting group for this standard can be found in the technical voting table. Voting report
3B/159/RV1
[EC1346] The following departments have generated it, and its general standard is the structural principles and vertical code; Part I Basic duties
Part II: Classification and classification of items Part I: Application guidelines: When considering the card! Part IV: Vertical code system is used. Some discussions or technical reports on the status of the station are still in the station? Time A, Attachment, Time request., Attachment D, Attachment 1, Attachment and Time Record G report for recommendation. GB/T5034-1—2002
It is related to the design, process, responsibility, operation and maintenance of the system, and it is necessary to adopt some common identification systems, for example:
Product (object) numbering system: used as an identification of product type; - A serial number system, used as an identification of individual products: The designation code number system is used as an identification of orders/contracts: \Reference code system, used as an identification of items within a system set of equipment. The following section describes the identification system and its application, which indicates the application of the classification specified in the code system and the code of the vehicle: Reference code system is used as an identification of type events in an enterprise or operating company. Identification end its application scope
segment control field
Shipei Shao Company
Chengliang/system construction engineering
Transportation Company
Dual-use carrying management prison year code
Model, part (zero work) number
Hold the Nc
Inner flat parts school
: Light type: Store the agent back to a light and mouth
3) Things and: Rate type in the case of each or system end hold light to the point in the use of 3) Bed type: Sample type: Not specialized it can be used to deal with type event"
Give a point to drag,||t t||Quickly issued
The reference code system should be pointed out that this standard provides a variety of methods for the reference code system. For the application of the reference code system, only the basic requirements and necessary qualities of the reference code system are sufficient to form the basis of the reference code system for this standard. They are given in Appendix A. Note that before completing the various sections of this standard, the reference code system of this standard is also included. The discussion of the basic concepts of the reference code system can be found in B5C91.231. This standard includes the original set limit number system, GB/T 5MS4-1281-1], IS0 3511[4[; and I:0 1D219-26 in the same query change number, National Standard of the People's Republic of China Industrial systems, devices and equipment and industrial products Structural principles and reference codes Part 1 Basic rules Industrial systems, equipment and industrial products - Structuring principles and reference designatinns - Part 1: II. Standard CB/I5D94.12002This part of 61346-1:1996
G/94 defines the general principles for describing information about the system and the structure of the system itself. This principle provides rules and measures for the establishment of reference codes for items (objects) in any system flow: Reference codes are used to identify items so that the information about the items and the products that make up the system can be related in different types of documents. For the purpose of planning, installation and continuity, the reference code can be placed at or near the actual location of the item. The principles specified here are general and applicable to all technical fields. They can be used for systems based on different technologies or for systems that integrate several technical technologies. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. At the time of this standardization, the versions shown are valid. All standard parts will be verified and parties to this standard should explore the possibility of using only the latest versions of the following standards. GB/T133198 Information technology information exchange - Higher-level standardized character set egV10/:546:1991) GR2659-20 Worldwide code for countries and regions 1CS) 3155-1:1947 IEC.14622U00L Industrial designation, installation and equipment and industrial product designation principles and reference codes Part 2: General classification and classification of items
15 () 157-119Hm difficult installation drawings Part 2: Code for buildings and building components 150157-:083 Technical planning drawings Code for effect exchange and policy components, Part 2: Code for rooms and other areas
3 Definitions
The following definitions apply to this part.
3.1 Item bxe
Entities used in planning, technology, combustion, operation, rubber and acceptance processes. Notes: 1. Existence can refer to the real or non-real "average", or to the relevant information. 2. Item 4 exceeds the monthly case, according to different paths. The observation will be - aspect "see 3.3), approved by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on August 5, 2002, implemented on January 1, 2010. 3. The system ays1em
has a complete set of blood dates with internal recording system. CB/T 5094.1 :2002
The actual average of multiple systems: Zhang dynamic purchase system non-water system washing, the establishment of the system parts than the elastic machine 2 when the cumulative system points: the system part, the bottom: it is the tax item month. 3.3 (aspects Baen
washing selection of relevant systems or system items of the day or spread close to them are so specific, this path can be:
East flow or item in the dry plan (out thank point): system flow stock item is how to choose two products specification point: system mirror ton item month one where (position joy point), 2.4 function funcan
now made.
3.5 strict product prodac t
labor, or self-strengthening or artificial process flash question period or mountain completion, note
user product use common blank part number, price number and/or name 2 can be a system or equipment service as a product,
3.6srueure
describe the system, etc.! Component relationship (all relationship or part relationship) The relationship between the various aspects of the system: 3.7 reference code referencades.gnsiien as a system component book to put the rest of the system and more than one aspect of the system identification: 3. Multiple single product reference code wingle level refereace deeigaacion for the specific items of the system must be given a code for the system reference code 3-9 multiple reference codes imli-vel r[rrrre -siguinm through the entire system to give the structure of the new reference code. 3.10 code set eerencedesignutionact thief seasonal state of the light: there are few can only increase the identification of the project. Note that the code set does not share the same components you can note or similar to the other items in the beauty of the change, 3.11 code reiererire teaigraioioup flash reduction seasonal illumination code. It serves as a standard for the whole forest to identify the items of concern, and there is no single number that can clearly identify the item.
4 Structural principles
For the design of fast systems, it is necessary to decompose the system and its information into the lower right part, and then the lower right part is called the next step: this continuous decomposition of the flow part and the combination of the receiving part is called the station structure. The three parts should have the following characteristics:
The information station structure of the system. The information is distributed in different files in the information system: The content structure of each file (see CBT6!.1[2] for details): Refer to the selection of the optimal number (first: excellent)
Of course: the system or component is determined by the original point.
CB/I 50S4.1 2002
Blood Use 1 shows: A system and the items that make up it can be viewed from multiple perspectives (for example: what does it consist of? What is the drug?
Position the drug?
However, the structure of the relevant information within the system may vary greatly depending on the prescription used. Therefore, each prescription requires a separate structure.
For the types of aspects studied, this report divides the relevant aspects into the following structures:
functional aspects (total 4.2);
product aspects (see 4.3
and other aspects of 4.2).
1 The other types of aspects of the industry are also reflected in the comprehensive classification, for example, the state investment plan is not classified into non-materials, and the aspects are based on the system of other aspects, which are not difficult to win the bid, and
4.2 energy-saving aspects
|The output surface structure is based on the use of the system. The small elements are grouped into several paper components according to their functions, without considering the production and/or realization of immediate goods.
The information provided is based on kinetic energy. It can be shown in diagrams and/or text how the kinetic energy of the system is broken down into several components, which together can complete the purpose of the energy surface.
4.4 Surface structure
GB/T 5094.12002
Heart Sound Dongyuan
Figure 3 Production and Distribution Surface Structure
World Equipment
The location surface structure is based on the location layout of the system and/or the environment in which the system is located. The location surface structure shows that the system is divided into ten components according to the location and/or energy without considering products and/or energy. A location can contain any amount of products. In the location demand surface structure, the location demand can be broken down by inventory, for example, region|| tt||Store room/coordinates;
The vertical position of the cabinet group or shelf;
The location of the shelf;
The location of the panel:
-That is, the location printed on the panel.
The work that provides information based on the location map structure uses pictures and/or text to illustrate the actual location of the product in the structure. Figure 1 shows the medical solution of the location map structure,
The medical solution of the location map structure is
GB/T 5094.1 2002
Building stability
Fast must be on the positionwww.bzxz.net
Stand up to refuse the shock
4.5 Profiling along the description of the project day and the project event main resistance to the above position fee
An: Format
A point day of any force, can also be used to refer to the other day's heart force surface. For the identified day of the near continuous identification of the results, can be shown in Figure 5 A
(F. type next day)
(II and month
Figure 5A day containing the surface structure
This tree form is shown in the figure. A-type project
GB/I5094.12002
(current month)
(11-type project day)
(F end 7)
(type child)
(C-type with purpose)
(B-type empty project)
《[>type single month)
(h Rui》
CI Nao)
(type low)
(G)
[1-type month]
Figure 6-type project…The structure tree of the structure tree shown in Figure 5 is also a common structure tree. The following is an example of the structure tree shown in Figure 5. The decomposition of the A-type project is shown in Figure 5. In this structure tree, the A-type project has three components.Among them, the same 3 items are used to represent the same purpose, namely A profit project (B piano project) (C plastic project) (B type project) and the supporting number diagram: the type project is composed of two components under the figure, namely D and D, and the two components are called items,
(type project)
indicates a project with a check mark on the surface. The symbol for each item is filled in. The type project on the figure is considered as the combination of
GB/T 5094.12002
The project has no component items in the research aspect, but has a component item, as shown in the figure, the above item
is full of symbols used in the month. The symbol is too happy to be a series of parts
Electromechanical 2
(item)
such as:
(project)
Chuanghui 4
(type item)
The positive type item is composed of one side
, and the structure tree of the various aspects of the marked items can be given a basic item: The complete drilling tree of this aspect is shown in Figure 1. The relevant commercialization is shown in Figure 5: A-type attack item (C-type item) (C-type item) (D ... Each item in another scale should be given a single service code, and the single-layer service code is unique to the item in the modified half of the scale. For the item represented by the end node, it should not be given a single-layer code. The item represented by the node can have a certificate part number, sales number, and other names. The relevant person in charge has a large system 2 state code,
5.2 Reference number format
5.2.1 General layer reference code
The single scale reference code given to the teacher should include the preceding symbol, and the preceding symbol is one of the following two codes:
Shared call code scattered characters:
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.