This standard specifies the required sanitary protection distance between tanneries and residential areas. This standard applies to tanneries and their expansion projects located in Pingyuan and Weiqiu areas. The sanitary protection distance of existing tanneries should be determined by the competent department of the construction unit and the health and environmental protection authorities of the municipality or autonomous region where the construction project is located based on the odor measurement and evaluation report. GB 18082-2000 Tannery Sanitary Protection Distance Standard GB18082-2000 Standard Download Decompression Password: www.bzxz.net

GB18082—2000
All technical contents of this standard are mandatory. The above-mentioned industrial enterprise health protection distance standard is a comprehensive standard involving construction planning, industrial construction general layout, environmental sanitation, and sanitary engineering. Its purpose is to ensure that the pollutants generated by national key industrial enterprises after the production will not affect the health of people in residential areas. This standard aims at the characteristics of various harmful factors, finds out the occurrence, diffusion, dilution, attenuation, and degradation characteristics of harmful factors, and then determines the allowable emission intensity of industrial enterprises based on the best practical technical principles, that is, according to the governance measures and maintenance management measures that can be achieved at my country's current economic level, and finally selects the appropriate atmospheric diffusion model and corresponding parameters to determine the required dust protection distance. This standard has been implemented since January 1, 2001. This standard was proposed by the Ministry of Health of the People's Republic of China. The responsible drafting units of this standard are: Institute of Environmental Sanitation and Sanitary Engineering, Chinese Academy of Preventive Medicine, Hunan Provincial Health and Epidemic Prevention Station, and Changde District Health and Epidemic Prevention Station, Hunan Province.
The main drafters of this standard are: Shao Qiang and Hong Yanfeng. This standard is interpreted by the Environmental Health Monitoring Institute of the Chinese Academy of Preventive Medicine, entrusted by the Ministry of Health. 26
National Standard of the People's Republic of China
Health protection zone standard for leather plantsWww.bzxZ.net
Health protection zone standard for leather making plant This standard specifies the required health protection distance between leather plants (leather and leather processing plants) and residential areas. GB18082—2000
This standard applies to leather plants and their expansion projects located in plain and hilly areas. The health protection distance of existing leather plants: It should be determined jointly by the competent department of the construction unit and the health and environmental protection departments of the province, municipality and autonomous region where the construction project is located based on the odor measurement and evaluation report.
2 Definitions
This standard adopts the following definitions
2.1 Health protection zone The minimum distance from the boundary of the department (vehicle or work section) that produces odor to the boundary of the residential area. 3 Standard Contents
3.1 The sanitary protection distance of the tannery shall be determined according to the average wind speed in the area in the past five years as shown in Table 1. Table 1
Cattle production scale
10,000 sheets/year
Average wind speed in the past five years, m/s
3.2 The location of the tannery and the residential area shall take into account the influence of factors such as wind direction, frequency and terrain to minimize the pollution to the atmospheric environment of the residential area.
Approved by the State Administration of Quality and Technical Supervision on April 10, 2000 and implemented on January 1, 2001
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.