GB/T 4019.1-1997 Square column vertical drilling machine accuracy inspection Part 1: Geometric accuracy inspection
Basic Information
Standard ID:
GB/T 4019.1-1997
Standard Name: Square column vertical drilling machine accuracy inspection Part 1: Geometric accuracy inspection
Chinese Name:
方柱立式钻床 精度检验 第1部分:几何精度检验
Standard category:National Standard (GB)
state:in force
Date of Release1997-01-01
Date of Implementation:1998-07-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.40 Drilling Machine
Standard Classification Number:Machinery>>Metal Cutting Machine Tools>>J54 Drilling, Boring and Milling Machines
associated standards
alternative situation:Part 4019-1983
Procurement status:eqv ISO 2772-1:1973
Publication information
publishing house:China Standards Press
other information
Release date:1983-12-15
Review date:2004-10-14
Drafting unit:Dahe Machine Tool Works
Focal point unit:National Technical Committee for Metal Cutting Machine Tools Standardization
Publishing department:State Bureau of Technical Supervision
competent authority:China Machinery Industry Federation
Introduction to standards:
This standard specifies the requirements and methods for the inspection of the geometric accuracy of square column vertical drilling machines. This standard applies to general-purpose square column vertical drilling machines. GB/T 4019.1-1997 Inspection of the accuracy of square column vertical drilling machines Part 1: Inspection of geometric accuracy GB/T4019.1-1997 Standard download decompression password: www.bzxz.net
Some standard content:
JC5.25.080.40
National Standard of the People's Republic of China
GB/T4019.1~~4019.2—1997
Square column vertical drilling machinesWww.bzxZ.net
Precision inspection
Bnx type vertical drilling machines---Testing of the Issued on November 13, 1997
State Administration of Technical Supervision
Implemented on July 1, 1998
CB/'4019.1--1997
This standard amends GB4013.83 Accuracy of square vertical drilling machine. It is equivalent to the international standard IS2772-1973 Square column vertical drilling machine - Precision inspection - Part 1, Geometric accuracy inspection 3 (confirmed in 1991). This standard makes minor changes to ISO2772-1 in terms of technology. GB/T419 is divided into two parts under the general title of Accuracy inspection of square column vertical drilling machine 3: Part 1 GB/T4019.1 Geometric accuracy inspection Part 2 GB/T419.3 Geometric accuracy inspection. This standard shall replace the geometric accuracy inspection part of GB4019-B3 Essence of square column vertical drilling machine from the time of entry into force. The car logo is produced by the Ministry of Machinery Industry of the People's Republic of China. This standard is under the jurisdiction of the Beijing Machine Tool Research Institute of the Ministry of Machinery Industry. The drafting units of this standard are Dahe Fandi Factory, Manzhou Machinery Bank Factory, Baizi Machinery Factory. This standard was first issued in 1983.
0B/T 4019. 11997
ISO Foreword
ISO (International Organization for Standardization) is a world-class national standardization organization.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.