JB/T 53523-2000 Multi-rope friction hoist product quality classification JB/T53523-2000 standard download decompression password: www.bzxz.net

Machinery Industry Standard of the People's Republic of China
JB/T53523-2000
Multi-rope friction hoist
Product quality classification
(Internal use)
2000-03-30 Issued
National Machinery Industry Bureau
2000-10-01 Implementation
JB/T53523—2000
This standard is a revision of JB/T5352394 "Multi-rope friction hoist product quality classification". The product standard based on this standard is GB/T10599-1998 "Multi-rope friction hoist". Compared with JB/T5352394, this standard has basically not changed the main technical content except for the editorial modification of the original standard. However, in order to be more perfect and accurate, the expression of some technical contents has been modified, and some specific contents have been supplemented, mainly: - the product standard based on it has been changed to the new standard GB/T10599-1998 - the specific size, accuracy, and surface roughness of the original standard inspection part in Table 4 have been cancelled and replaced with the functional name of the part; - the accuracy requirements related to the inspection part and the measuring point diameter are supplemented with different inspection requirements corresponding to different diameters of the measuring point. This standard replaces JB/T53523-94 from the date of implementation. This standard is proposed and managed by the National Technical Committee for Standardization of Mining Machinery. The responsible drafting unit of this standard: CITIC Heavy Machinery Company. The main drafters of this standard: Jiang Zhaoqiu, Zhang Yingshuang, Li Gang, Cai Jingying, Tian Min. This standard was first issued in November 1987 as JB/ZQ8116-87, and the standard number was adjusted to JB/T53523-94 in September 1994. 1 Scope
Machinery Industry Standard of the People's Republic of ChinabZxz.net
Multi-rope friction hoist
Product quality classification
(Internal use)
This standard specifies the quality grade, test method and inspection rules of multi-rope friction hoist products. This standard is applicable to the assessment of the quality grade of multi-rope friction hoist products. 2 Referenced standards
JB/T53523-2000
Replaces JB/T53523-94
The provisions contained in the following standards constitute the provisions of this standard by reference in this standard. When this standard was published, the versions shown were all valid. All standards are subject to revision. Parties using this standard should explore the possibility of using the latest version of the following standards: GB/T 2281987
GB/T2301991
GB/T231—1984
GB/T1958——1980
GB/T3177—1997
GB/T 3768——1996
GB/T6060.2—1985
GB/T100951988
GB/T 10599—1998
JB/T32771991
JB/T3721—1999
JB/T3812—1999
JB47301994
JB8519—1997
JB/T535831999
Metal tensile test method
Metal Rockwell hardness test method
Metal Brinell hardness test method
Shape and position tolerance inspection regulations
Smooth workpiece size inspection
Acoustic sound pressure method to determine the sound power level of noise source Simple method of measuring the surface by envelope above the reflecting surface Surface roughness comparison specimen Grinding, turning, milling, plugging and planing surface gradual Open-line cylindrical gear precision
Multi-rope friction hoist
Mine hoist and mine hoisting winch hydraulic station Mine hoist disc brake shoe
Disc spring for mine hoist disc brakeNon-destructive testing of pressure vessels
Mine hoist and mine hoisting winch disc brakeZZ, ZK planetary gear reducer product quality classification "Safety Regulations for Coal Mines" (1992 Edition) "Safety Regulations for Metallurgical Underground Mines" (1990 Edition) 3 Quality Grades
3.1 Grading Principles
The quality grade of the product is determined according to the adopted standards, the technical level of the product, the inspection of the finished product, the quality inspection in the production process and the user's evaluation opinions. It is divided into three grades: qualified products, first-class products and superior products. 3.1.1 Qualified products
Approved by the State Bureau of Machinery Industry on March 30, 2000, implemented on October 1, 2000
JB/T53523—2000
Organize production according to current standards, and the quality level of the actual products meets the requirements of the corresponding standards. 3. 1. 1. 1
The quality of the product production process is stable.
3.1.1.3 The accessories and supporting products can ensure that the main machine reaches the level of qualified products. 3.1.1.4 Users evaluate that the product performance meets the use requirements. 3.1.2
First-class products
3.1.2.1 The quality indicators of the product's structure, performance, accuracy, safety, hygiene, reliability and life span reach the general international level, and the quality level of the actual products reaches the general level of similar international products. 3.1.2.2 The quality of the product production process is stable. 3.1.2.3
Accessories and supporting products can ensure that the main machine reaches the first-class level. Users evaluate that the product has a good use effect and the product is competitive in the domestic market. 3.1.2.4
3.1.3 Superior products
3.1.3.1 The quality indicators of the product such as structure, performance, accuracy, safety, hygiene, reliability and life have reached the international advanced level, and the physical quality level has reached the advanced level in the past five years compared with similar foreign products. 3.1.3.2 The quality of the product production process is stable. 3.1.3.3 Accessories and supporting products can ensure that the main machine reaches the superior level. 3.1.3.4 Users evaluate that the product quality is equivalent to the advanced level of similar international products and the product is competitive in the international market. 3.2 Quality grade indicators
The quality grade indicators of multi-rope friction hoists shall comply with the provisions of Table 1, Table 1
Quality grade
Qualified products
Superior products
Finished product inspection
Finished product inspection items
Qualified rate
Finished product inspection shall comply with the provisions of Table 2.
Quality requirements
Performance of the whole machine
Performance of components
Assembly, painting and packaging
Quality inspection items
Quality rate
Item name
Maximum static tension of wire rope
Maximum static tension difference of wire rope
Reducer
Bearing temperature rise
Oil pool temperature rise
Main parts
Key items
Quality rate
Main items
Quality rate
Value or requirement
Qualified products||tt| |According to GB/T10599 regulations
According to GB/T10599 regulations
Superior products
Quality requirements
Comprehensive technical requirements
Reliability
And life
Compatibility
Safety and hygiene
JB/T53523—2000
Table 2 (end)
Project name
Sealing of oil pipe joint
Temperature rise of main bearing
Braking torque
Idle time of safety brake
Deceleration during safe braking||tt| |Brake disc end
Surface full runout
Assessment parts
Service life
Disc outer diameter <4000mm
Disc outer diameter ≥4000mm
First overhaul period
Service life of the whole machine
Disc brake disc spring
Reducer meshing
Partial life
Planetary gear
Parallel shaft
Spindle device rolling bearing
Main motor
Main electronic control
Personal safety protection:
Moving parts that affect safety are Protective measures Equipment safety protection measures:
Drag, control, operation monitoring, etc. must have interlocking and protection devices
Safety markings:
Markings, sound and light signals
Noise:
Noise of the whole machine at the driver's position on the control panel (the control panel is not isolated)
Quality inspection during production
Assembly, painting and packaging quality inspection items should comply with the provisions of Table 3Table 3
Item name
Static unbalanced torque of friction wheel
D≤2.25m
Friction wheel diameter
225m
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.