This standard specifies the classification, requirements, test methods, sampling and marking, packaging, transportation and storage of filter rod paper. This standard applies to filter rod paper for machine-rolled cigarettes. QB/T 2689-2005 Filter rod paper QB/T2689-2005 Standard download decompression password: www.bzxz.net

TC.S 85.060
Classification number: Y32
Registration number: 15741-2005
Light Industry Standard of the People's Republic of China
QB/T2689-2005
Agency Q0350—1999
Filter tip paper
Filter tip papcrWww.bzxZ.net
2005-03-19 Issued
National Development and Reform Commission of the People's Republic of China 2005-09-01 Implementation
This standard is a revision of (B3508-1 full mouth sample paper. Compared with the old B3503-1999 standard, the following are ten changes: After the second single "normative document" content: QB/T2689
Cancel the low-end LBZ-1, LB-2 curved people open, number, generally divided into fast products, -quality products, qualified products: This standard is issued by the China Light Industry Vocational and Technical Commission: This standard is made in China! The starting price of this standard is: China Pulp Research and Development. The starting price of this standard is: China, Ming, and the country: Wenlun. The previous versions of this standard are: ZB/T Y32006—1986, 0H/T3508-199y non-standard from the implementation of the European light industry and the public issued by the light industry standard QT350%-999 grade.1 Scope
Filter paper
QB/T2689—2005
This standard specifies the classification, requirements, test methods, samples and specifications, packaging, transportation, and other aspects of the paper. This standard applies to the production of incense. 2 Normative referenced documents
The clauses in the following documents are the subject of this standard through reference. For any referenced documents of a certain period, all subsequent amendments (excluding errors) or revisions are not applicable to this standard. However, the latest research on the year in which the standard was reached can use these documents. Version. All referenced documents of the same period shall apply to the manufacturer's version. G/T450-2002, VIS0186: 1994 GE/T451.2 Paper and paperboard - Determination of quantitative content (GB/T451.2-2002, eqVTS0536: 1995) G/T462 Determination of the content of paper and paperboard (GB/T462-2003, JS028: 185, M0D) GB/T1541 Method for determination of the thickness of board and plate (GB/T154-989, eqPP43m-1985) GI/T2828.1 Counting sample inspection - Part 1: Inspection according to the acceptance quality limit (AQL) - Whole batch inspection sample counting period GBT2828.1-2013, JS02859-1: 199 9: IDT) GB/T 7974, paperboard and pulp - Determination of concavity (reverse direction/concaveness) (GB/794-2002, EN 2470:1999 3
Paper specifications and markings
GB/T 10342
GB/T 10739 - Standard atmospheric conditions for paper and paperboard and pulp test (GB/10739-2002, EN 187:1999
GB/12055-1998 Roll paper
GB/12914 - Determination of tensile strength of paperboard (induction method) (GB/T 13914-1991, EN 15019242:19852
3 Classification
3.1 Full-length paper is divided into superior and inferior products according to its quality. First-class products, qualified products.3.2 The filter tip samples are double-rolled.
4 Requirements
4.1 The technical specifications of the filter tip samples should meet the requirements of Table 1 or the requirements of the contract: 42 The length of the filter tip sample is 500020>m, 450018)m, (40±16)m, and the width is 27±0.25.mm, 26.5-0.25)mm or meet the requirements.
4.3 According to the contract, various specifications can be produced.
4.4 The filter tip paper should not have bubbles, cracks, lines, stains, fiber bundles, sand particles, holes and other diseases that affect the use.
4,5 The same plate should be adjusted according to the difference, and the unknown product should be different. 4.6 After slitting, the paper reel should be tightly separated, the reel surface should be flat and clean, without edge change or strip running, and the machine should work properly. After being put on the machine, the operation should be smooth, without obvious jumping or control phenomenon. QB/T2689-2CC6
4.? The core should be flush with the reel surface, without convex core phenomenon, and the end of the reel should not have thick edges. 4.8 The number of heads per station should not exceed 1, and the number of heads per plate should not exceed 2. The number of heads per plate should increase by 1 to 3. The double strips should be glued together, and the center of the station should be solid. The station environment is not a form of title. 4. The filter paper should be sealed with a plate. The width of the filter paper should be 5 and the width of the red filter paper should be 5. The whole flow should be neat and uniform. The joints should be glued. The second system: There should be original phenomenon table
Name
Price Zhangqiang Direction
Fee Request Points
0.3 -1. 5
Test Force Method
Study Distance
32:4 1 5
82.0--E5.u
Test the material according to GB/T450, and the material shall be tested according to the standard of GB/T10739. 5.1
Quantitative determination shall be made according to GB/T451.2.
Tensile strength and elongation shall be determined according to 12914.
5. 4 Heat (whiteness) shall be determined according to GR/T 79T2. 5.5
Ash content shall be determined according to GB/T12655-7 (5. 8
The moisture content of the water content is determined according to GB/14h2,
5.7℃ and GB/1511.
5.The daily temperature is determined by a vernier caliper, and the vernier caliper is accurate (61m:5.1 The quality is measured on a monthly basis,
5 Sampling
6.1 Each delivery is considered a batch, but each batch is not more than 301.6.2 The manufacturer guarantees that the produced paper meets the requirements of the Contains this standard or company requirements, each box or each product is marked with a price division! 6.3 Counting state sample control inspection management family T282.1 provisions, sample unit is plate: building support quality limit (A:: pull alone, Dong Gong, AQL-4.0: music, also fast rate, fullness, delivery moisture, dust, appearance red disease, QI. 6.5. The village sample is the case of Sichuan stop product control inspection, the control inspection level is the inspection level 9-3 (Table 2 ): 6.4 Determination of acceptability
brother, if the number of unqualified products found in the first sample is smaller than the first acceptance number, the batch should be considered acceptable; if the number of unqualified products found in the second sample is greater than the first rejection number, the batch should be considered acceptable: if the number of unqualified products found in the third sample is between the first acceptance number and the first rejection number, the first half of the products should be counted as one sample and accumulated, and the unqualified products found in the second and first acceptance numbers should be paid. If the number of unqualified products is less than the first acceptance number, the batch is acceptable: if the number of unqualified products found in the third sample is greater than the first acceptance number or the first rejection number, the batch is considered acceptable:
brother, if the number of unqualified products found in the third sample is greater than the first acceptance number or the first rejection number, the batch is considered acceptable:
brother, if the number of unqualified products found in the third sample is greater than the first acceptance number or the first rejection number, the batch is considered acceptable:
brother, if the number of unqualified products found in the third sample is greater than the first acceptance number or the first rejection number, the batch is considered acceptable 23G
Description of overage level 9-2:
6.5 The buyer has not entered the acceptance. If there is a problem with the quality of the batch of products, it should be re-inspected within one month after acceptance! The same current re-inspection. If it does not meet the requirements or requirements, it should be handled separately; if it does not meet the standards or requirements, it should be handled by the batch meeting.
7.1 The packaging, packaging, and transportation of GB/10342 should be marked. The packaging paper should be affixed with three labels, including the following contents: production name, product specifications or grades, product characters, cutting process, inspection code, etc.: Each end face has a 4-year inspection.
7.2 The packaging and transportation of non-standard products can be carried out by the manufacturer. 7.3 The red product should be stored in a dry and windproof warehouse to avoid rain, wind and humidity. 4. The product should be stored, piled and graded according to the specifications and should be filtered out.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.