This part of GB/T 4122 specifies the terms and definitions of packaging containers made of wood, bamboo or wood-based composite materials. This part applies to the design, manufacture, inspection and circulation of wooden containers. GB/T 4122.4-2002 Packaging terms Wooden containers GB/T4122.4-2002 standard download decompression password: www.bzxz.net
This part of GB/T 4122 specifies the terms and definitions of packaging containers made of wood, bamboo or wood-based composite materials. This part applies to the design, manufacture, inspection and circulation of wooden containers.

National Standard of the People's Republic of China
GB/T4122.4—2002
Generation 728:
Packaging term wooden containers
Packaging term wooden containers2002-12-20 Issued
Xiaohua People's Republic of China
National Education and Finance Supervision Inspection and Quarantine
2003-05-01 Implementation
61/T:1338 Packing table technical clearance 3 is divided into five parts: One:
Two: Protection:
——Wooden container
According to or with dynamic inspection,
GR/T4122.42002
The five parts cover the broad H industrial standard 11S20107 this box term 3 international standard belt chemical organization$>2074 control composite board 3 if the soil. Non-equivalent double ". Compatible,
replace 15T72-1993.: 6B/T7385, 1S93's five parts of the main technical content of the eight new explosion technology assessment of the customer is located
this part of the national color number terminology adopted in the general standard, this standard eliminates the technical content of the B/3116 packaging technology in the chapter \ packaging technology "related. Appendix A of this part is the data list,
this part of the general packaging technology is issued.
this part is under the jurisdiction of the National Technical Committee for Standardization. This part was drafted by: Mechanical Science Research Institute, Lefang Xun Packaging Products Co., Ltd., Shouri Packaging Transportation Protection Co., Ltd. User Light Packaging Products Quality Value Testing User Heart
Technical Identification Key Initiators: Ying Fan, Zhou Man, Ni Yixun, Tu Lizhi, Ji Renban: This part contains the following versions: tR/T 7565:u3.GH/T7285 .-1S..1 Sample figure
Packaging terms for wooden containers
GB/T4122.4—2002
R: 14.22 This part contains the terms and their definitions: packaging containers made of bamboo or other composite materials (in a simple form);
this part is used for the design, manufacture, and general circulation of wooden containers;
wooden containers are generally made of bamboo or other composite materials; in the packaging, there are adhesives, such as boxes, samples, etc. 2.2
wooden transport packaging containers
Lranspnrt wanden containers
Use small money or hostages to identify the store's responsibility for the war, pass with ten open packaging goods certificate, 2.3
Wooden container pest control
curlainers ellniinile prsis Lmudte through the material ticket benefit management of high temperature treatment. Start the work of this consultation alliance average long patients and materials bacteria on the packaging of your impact and regional sick market "transmission of the way to let.
Medicine ditch two steaming outside treatment
fmnigatian handlle
Use only selective deodorization of tea rain special in the room air and a certain temperature and humidity environment refining plan or wooden container retrograde a certain time the most mature · with Chen Da wood nature of the sequence into the general three ways within 2. 5
high temperature treatmentightemmeraturehandle use a drying device to complete a plan with the same commercial temperature to reduce the moisture content of the wood in the high sedimentation method concept [value only in the trial bacteria or the hospital
anti-separation must be treated
preseivel laanlle
use organic permanent slip type with corrosion agent, through a series of unique true narrow characteristics, over-drying, stretching before separation into the reverse line of fat, and unknown tight platform to make the orchid material long-lasting anti-slow effect natural method 3 wood Yi device type terminology
this box wooden Rage
Use uncut, price-making or large-scale composite materials to obtain the most volumetric volume including light 3.2
Ordinary wooden idens
Pressure box version, new when the book is made of technical version GB/T4122.4-2932
Sliding box
akid cuse
Use the cooking plate surface of the frozen year structure to benefit the soft moon box board, the box is made of uncut 3. 4
Frame box
wooden frarred icave
The surface and end surface adopt the structure of the pin-sweep combined with the box board. The chassis is made of uncut materials, 3.5
[ully yheathed cass.
The surface is not closed or folded, such as the box 3.i
The surface is made of bamboo slats or other wood. 3.7
Wire strapping
wirehundrase
monthly adjustment will be sold to connect the links into each well and then use the energy file to make wooden box 3. 8
plywoodcase
plywood box
flat village made box block, with Junhe tax made box made of wooden box 3.9
tasewithplybhaiboo
sexually obtained plywood
open wood design frame or year Chuanshi source combined loss technology collected box surface made of combined tax made box 3. 0
large cabinet Yihu cardboard box ca.rwithwnnd-framedfiterhra'd diamond grid adopted Japanese wood page, the surface adopted currency tile according to the benefit of the combined paper sales. 3.11
Detachable wooden crate
A crate that can be disassembled and the parts can be arranged in a complete manner without damage and can be used by customers. 3.12
Skid agseubly
Integral parts for packaging. 3.13
Spaller
A complete wooden component used for packaging a structure, which is used to form a package that can be returned. Multiple-column type.
Wonden hix
A container made of wood or plywood. 3.15
Wooden barrel or oodeu drum or plywood drnmA piece of wood
Used as a single piece of wood! 4. Wooden cabinet design, technical terms
log
log
log
board
building material
board
building material of one or two times the size of the original material. 4.3
antinber
the product obtained by the technology.
drird sawn timbe
For sawn timber
after planning and artificial drying and artificial preservation to meet the requirements of the national moisture content, 4, E
anti-amine sawn timber
preserved sawn limher
after treatment, only the material that can be compensated by the merchant, d, E
the original size is ten times smaller than the original size. The original square material cant
is divided into single-sided square and double-sided square. 4.
The internal dimensions of the water chrysanthemum inner city
include internal length and internal width.
space clearanee
is the gap between the dangerous goods and the inner length of the container 4.1
The net length of the material used to make the container,
stacking load smeripoetl Inad
can be maintained to teach
top loud
the larger the load that can be borne by the container.
Flower adhesive ratio
Ialticeemtenl
The total length of the box surface between the washing grid boxes (total pet: ratio: expressed in percentage 4.14
tnrk lift yals
In order to facilitate the operation of the vehicle, a new parallel port is set on the wooden base, CB/I 4122.4—2002
GB/T4122.4—2002
Standing position
enlre ot aratilypl
for example or bloody soil you show the inner needs of the active direction are more heart listen to the letter have painted the name 4.16
job emperor position work
slingplacc
under the unharmful benefit system, for the environment to set the book's search for the letter and clean the mark 4.17
Load type
laradtype
Green report examines the geometric shape and case limit of the load test, and is divided into purchase and limit test and Zhu less load:
wood structure surface help cat wurfaeerouphaeseForwoorienpleces according to the machine standard fee request detailed determination and marking cloud after the close decoration also handle the technical structure of the secondary surface production light report! 4. 13
pul togethel
history box stock water with single force support blood rate dispatch connected potential Ke please. 4.23
opposite press chain
hnttjnint
version between the flat and the shape of the law.
pressure edge connection avoidance
ship-iap nr rahbet juinl
this carbon production interval with each slope learning secondary one bridge press color style 4.22
select sugar press chain tnngmeama grnovejnin two technical places special addition defense state anti world allowed insertion press total light. 4. 23
finger research chain Hgrrjaint
high village, the plate material will flow into the corresponding finger-shaped small after the operation, the shape of the decision, 5 narrow structural terms
end face end
package table customer suffering specification whole request chicken companion,
packaging container similar part whole estimate purchase parts,
feeling into the room, etc., change the special service plan report, chrysanthemum report connection board frame frame
most out 1. the lower twist card, the new control and equal card force uniform cattle, and the first board into the combination of the fixed joint type tpeof tiaming
extending frame configuration form
electric box, according to the types of inflammation and measurement surface, the next step for our company to match the many kinds of board specific test code NIIK based 2X etc, the total dynamic technology structure shaping is, 5.6
indicates the first board in the standard reinforcement of light material 5. 7
horizontal cleut
box and 1. only uneven box.
vertical clenl
staggered straight box
oblique diagoanl ei
box and peco-shaped wheel fence
middle ceat
in the description file or the file door and H line finger block, 5.11
inner meat file inner cleat
book blood inside the building.
upper, lower reach between the evil has a standard.
auxillary sirat
short heart leave, month in the construction of the Calicut Society and the charity. 5.14
Upper frame
per frame meinher
side or surface, the plate that considers the horizontal force return of the upper part of the guard frame 5.15
Ier Fraue nener
The lower frame
draws a way or brings blood to the lower part of the frame to seek horizontal direction. 5.15
Connecting plate
onneeting hoardl
Chuan dry through the two sides, and can be rotated, 5.17
components that constitute the group of beds that can accommodate the pages. 5. 18
crossheam
This support is used to support the load and bear the positive and negative pressure of lifting and squeezing. 5. 1
Connect the construction cover and the ground,
GB/T4122.4--2002
CB/T 4122.4--2002
Beam requirements joikl anpport
Water three purple is accumulated on the surface above the example, supporting the ground properties of the beam. 5.21
brldging
vertically placed on the lock, it can be said that the component that increases the brightness of the top is lower, 5.22
arlznntalhrace
the component installed horizontally between the commercial columns.
dtagonalhaae
the inner component installed obliquely between the columns
base skitllse
the sliding wood, Rui wood, school wood bottom board, etc. are used to form the wooden box and the room part of the wooden box. 5.25
consists of the main component of the bottom of the room 5.26
auxiliary sliding wood rulingslrip
the bottom of the bookcase, the position of the hole for the bookcase is even. 5.27
header
for the use of air in the two steps of the wooden body to bear the load of the content of the frame 5.2
wooden lund beuring wr floor memher flat ten smooth wooden horizontal called the table of six kidneys used to accept the load of the content of the uniform, 6 wooden container auxiliary component terminology
prestri
for the fixed core material, in the side, end, quality and base of the package. 6.2
caseslem
for the use of artificial moving and fixed on the wooden box. 6.3
linebward
Material used to divide the product in the box into several parts or to separate the contents; 6.4
tiedawnhleck
A reinforcement component used to prevent the contents from moving in one direction; 6.5
Blockbaseblorkan-neathlockA component used to prevent the contents from moving in one direction due to the active force of the contents; hracieg
A female support rod installed in one direction to fix the contents. Hlerpkece
GB/T4122.4—2002
Promise to install a sliding wood under the fork, used for the lifting and forking position or block under the inner box to prevent the box from being accidentally cut,
Pre-protection
stingFiling
To protect the lifting load, it is installed at the contact position between the lifting rope and the side of the box and the top of the box, 6.0
Lifting guard iron
sllog prolecror
To protect the wooden coin from the lifting load, it is installed at the contact position between the lifting case and the box 6.1
cormr 6.31
edgepintec.tor
for the joint between the end and the end, 6.12
ventilation seal
weiliursyvet
ventilation hole is installed when the container is filled, and it is installed in the ventilation box surface: 6.13
sluel strapping
steel strapping to fix the contents of the packaging container. 6. t4
staple
for the treatment of the shape of the limit.
Packing list
Histcoer
Anchor on the outer side of the lead to install the same as the code piece. 6. t6
Plywood
plynaod
A modified layer of wood or single-layer light bonding, heat-treated, with the fiber group direction and the vertical white wood rescue material 6. 17
Plywood
plyhabn
Use us to reduce the overall effect, heat-treated or type of board. 6.18
Hard fiberboardharl tuardbZxz.net
A board that has been heat-treated and heat-treated with cabinets and additives. K/T4122.4-2CG2
Terms of wood components
nnclal wanl
also in the technical part of the control plan. Generally speaking, the joints connected with the wood are divided into two types: live parts and external joints. 7.2
The color of wood is usually changed by bacteria, which is generally divided into two types: chemical discoloration and real discoloration. 7.3
Decay
The physical and chemical properties of wood will change due to the influence of bacteria, which is manifested as color, deformation, softness and other physical signs. 7.4
insert pest
inside each people out of the wood fast sink: a divided into a ditch 7.5
attackbyfungiumd baeleriu
because of the south, each bend, discoloration fungus and out of the wood control door near the wood lack of south 7.E
Shape dfurmed
The material has a fixed shape, and there are two types of curves: crooked and crooked. 7.7
crooked
The line of the material is on a straight line, and the straight line selected from two directions is called a variable curve. The variable curve is generally divided into two types: main curve and multi-directional variable curve.
Cause texture chek
The separation between the red and the cracks is formed, and the type is generally plastic and wheel dense. 7.9
Material texture twill
Not to the village ten red stroke can not be consistent and can be oblique, the mouth is not to the lower transport of blood such as the work of the state material called artificial effect.
The sealing material is not densely sawn and can be partially
sawed and cut.
Eaw hladedevlaied from Iinednring cuttinnThe material is changed due to the new manufacturing process and the material is flat or the current inheritance of the science. 7.12
barkpincket
The plan is to continue to grow by auxiliary, and the learning technology will be part of the high part or all of the tree. 3
8 The content of this test and test terms
neiweiglit
The total amount of the crack itself.
Gruss wcight
Blood fittings are total quality
Accurate size
Standard size
The size to be specified in the standard.
Nominal size
Nominal size
When the power is (20V), it is about 8.5
Actual size
Elual siz
The actual measured size
Moisture content
Moisture content
The ratio of the mass of water to the total dry weight of the unit. The ratio is 8.7
Density of this component
densily of The mass of the total volume of the wood component is m, 8.8. The hardness of the component is the ability of the structure to resist the external force that the component can withstand. It is divided into: compressive strength, tensile strength and tensile strength. GB/T 4122.4-2CC2 GB/T 4122.4-2002 A, 1 General unboxing [Informative Appendix] The technical specifications of wood components are shown in Figure A, 1. A.2 Wooden box
The ten main parts used in the wooden box are shown in Figure 8, 2.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.