This standard specifies the classification of packaging machinery, the method of compiling packaging machinery models, etc. This standard applies to packaging machinery products. This standard replaces GB/T7311-2003 "Method of compiling packaging machinery models" and GB/T19357-2003 "Classification of packaging machinery". Compared with GB/T7311-2003 and GB/T19357-2003, this standard has the following main changes: - Expanded the scope of application of the standard; - Added the content of the principles of compiling packaging models; - Clarified the main content of the optional project code; - Modified the structural type code to the part that cannot be omitted in the packaging machinery model; - Added the content of examples of commonly used packaging machinery models; - Listed some examples of the compilation of packaging machinery models. GB/T 7311-2008 Classification and method of compiling packaging machinery models GB/T7311-2008 Standard download decompression password: www.bzxz.net
This standard specifies the classification of packaging machinery, the method of compiling packaging machinery models, etc. This standard applies to packaging machinery products.
This standard replaces GB/T7311-2003 "Method for Compilation of Packaging Machinery Models" and GB/T19357-2003 "Classification of Packaging Machinery".
Compared with GB/T7311-2003 and GB/T19357-2003, the main changes of this standard are as follows:
--- Expanded the scope of application of the standard;
--- Added the content of the principles for compiling packaging models;
--- Clarified the main content of the optional item code;
--- Modified the structural type code to the indispensable part of the packaging machinery model;
--- Added the content of examples of commonly used packaging machinery models;
--- Listed some examples of the compilation of packaging machinery models.
Appendix A of this standard is an informative appendix.
This standard is proposed and managed by the National Technical Committee for Packaging Standardization (SAC/TC49).
The drafting units of this standard are: General Research Institute of Machinery Science, China Machinery Productivity Promotion Center, China Packaging Federation.
The main drafters of this standard are: Huang Xue, Liu Guojing, Zhang Xiaojian, Liu Ping, Li Yue.
The previous versions of the standards replaced by this standard are:
---GB/T7311-1987, GB/T7311-2003;
---GB/T19357-2003.
The clauses in the following documents become the clauses of this standard through reference in this standard. For all dated referenced documents, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties to the agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated referenced documents, the latest versions are applicable to this standard.
GB/T4122.1 Packaging terminology Part 1: Fundamentals
GB/T4122.2 Packaging terminology Machinery

ICS55.200
National Standard of the People's Republic of China
GB/T7311-—2008
Replaces GB/T7311—2003GB/T19357—2003 Classification and editorial nominating method for packaging machinery2008-07-18 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration of China
2009-01-01 Implementation
GB/T7311-2008
This standard replaces GB/T7311—2003 "Method for compiling models of packaging machinery" and GB/T19357-2003 "Classification of packaging machinery". Compared with GB/T7311-2003 and GB/T19357-2003, the main changes of this standard are as follows: 1. The scope of application of the standard has been expanded;
The content of the compilation principle of packaging model has been added, and the main content of the optional project code has been clarified; 1. The structural type code has been modified to be an indispensable part of the packaging machinery model; the content of the examples of commonly used packaging machinery models has been added; and the compilation examples of some packaging machinery models have been listed. Appendix A of this standard is an informative appendix.
This standard was proposed and managed by the National Technical Committee for Packaging Standardization (SAC/TC49). The drafting units of this standard are: General Research Institute of Machinery Science, China Machinery Productivity Promotion Center, China Packaging Federation. The main drafters of this standard are: Huang Xue, Liu Guojing, Zhang Xiaojian, Liu Ping, Li Yue. The previous versions of the standards replaced by this standard are: GB/T7311-1987, GB/T7311-2003, and GB/T19357-2003.
1 Scope
Classification and model compilation method of packaging machinery
This standard specifies the classification of packaging machinery, the model compilation method of packaging machinery, etc. This standard applies to packaging machinery products. 2
Normative referenced documents
GB/T7311—2008
The clauses in the following documents become the clauses of this standard through reference in this standard. For any dated referenced documents, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties who reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced documents, their latest versions apply to this standard. GB/T4122.1 Packaging terms Part 1: Basics GB/T4122.2 Packaging terms Machinery
Terms and definitions
GB/T4122.1 and GB/T4122.2 The established definitions and terms apply to this standard 4 Classification
Packaging machinery products are classified according to their main functions. The classification of commonly used packaging machinery is shown in Table 1. Table 1 Commonly used packaging machinery classification and model
Classification/code
Filling machinery/C
Type or name
Measuring cup filler
Air flow filler
Plunger filler
Screw filler
Measuring pump filler
Tube filler
Material level filler
Timing filler
Pusher Filling machine
Pick and place
Gravity
Net weight
Gross weight
Single piece counting filling machine
Multiple piece counting filling machine
Turntable counting filling machine
Crawler counting
Model example
CL×××
CQX××
cSx×x
CG×××
C B×××
CTX×x
CF×××
czx×x
CMX××
CJD×××
CJUx×x
CJP×××
CJL×××
GB/T7311-2008
Classification/Code
Filling Machinery/G
Sealing Machinery/F|| tt||Wrapping machinery/B
Multifunctional packaging
Machinery/D
Table 1 (continued)
Type or name
Isobaric filling machine
Negative pressure filling machine
Normal pressure filling machine
Hot-pressing sealing machine
Welding sealing machine
Folding sealing machine
Embossed sealing machine
Plug-in sealing machine
Rolling sealing machine Compression sealer
Crimp sealer
Pressure sealer
Screw sealer
Sewing sealer
Stapling sealer
Tape sealer
Adhesive sealer
Ligation sealer
Folding wrapper
Twist wrapper
Seam wrapper
Cover wrapper||t t||Wrap-around wrapping machine
Stretch wrapping machine
Shrink packaging machine
Skin packaging machine
Filling-sealing machine
Filling-sealing machine
Carton opening-filling-sealing machine
Bag opening-filling-sealing machine
Bottle opening-filling-sealing machine
Carton (box) forming-filling-sealing machine
Bag forming-filling-sealing machine
Stamping-filling-sealing machine
Thermoforming-filling-sealing machine
Vacuum packaging machine
Gas filling packaging machine
Blister packaging machine
Model example
GDX××
GFXX×
GCX×x
FR×××
FZX××
FWxX×
FCx××||tt| |FX××x
FDX××
FJXx××
FNX×X
BZ×××
BJX××
BC×××
BLX××
BSx××
DC×××
DGXX×
DKXXXX||tt ||DKD×××
DKPX××
DXXx×x
DXDX×X
DXCXXX
DXR×××
DZx×x
DQ×××
DP×××
Classification/Code
Labeling Machine/T
Cleaning Machine/Q
Drying Machine/Z
Sterilizing Machine/S
Bundling Machine/K
Container machinery
Auxiliary packaging machinery/U
Table 1 (continued)
Type or name
Glue labeling machine
Sleeve labeling machine
Labeling machine
Hanging labeling machine
Shrink labeling machine
Dry cleaning machine
Wet cleaning machine
Mechanical cleaning machine
Electrolytic cleaning machine
Ionizing cleaning machine Washing machine
Ultrasonic cleaning machine
Thermal drying machine
Mechanical drying machine
Chemical drying machine
Vacuum drying machine
Thermal sterilizer
Ultrasonic sterilizer
Ionization sterilizer
Chemical sterilizer
Microwave sterilizer
Mechanical strapping machine
Hydraulic strapping machine
Pneumatic strapping machine
Strap-through strapping machine
Bundling machine
Compression baler
Container loader
Stacking machine
Disassembly machine
Coding machine
Sorting machine
Inspection machine
Sorting machine
Conveyor
Feeding machine
GB/T7311—2008
Model example
TNX××
TTXX×
TDX××
TSX××
QG×××
QS×××
QDX××
QLX××
QC×××
ZRXX×
J×××
ZH×××
ZK× ×x
swx×x
Kxx× x
KQ×××
KDX××
KSx××
JZ××x
JDX×Xx
ULX×X
Ux×××
UT×××
GB/T7311—2008
Classification/Code
Packing Containers and Container Parts
Manufacturing Machinery
Packaging Material manufacturing machinery
Other packaging machinery
5 Model compilation method
5.1 Compilation principles
Table 1 (continued)
Type or name
Cap making machine
Bottle making machine
Can making machine
Barrel making machine
Bag making machine
Corrugated cardboard machinery
Honeycomb cardboard machinery
On-site foaming machine
Model exampleswwW.bzxz.Net
ZG×××
ZPX××
ZGX××
ZT××x
ZDX×X
WLBX××
FBJ×××
XFP××X
The model of packaging machinery should reflect the category, series, variety, specification, derivation and improvement of the product. The model includes two parts: the main model and the auxiliary model. For examples of packaging machinery models, please refer to Appendix A. 5.2 Main model
5.2.1 The main model includes the classification name code and structural type code of the packaging machinery. If necessary, it can also be followed by the optional project code such as the packaged product, packaging material, packaging container or degree of automation. 5.2.2 The main model is represented by the phonetic letter of the first Chinese character of its representative Chinese name. When there are repeated letters, the phonetic letter of the second Chinese character can be used to distinguish. It can also be represented by a combination of the phonetic letters of several representative Chinese characters of its Chinese name. The letters I and O are generally not used.
5.3 Auxiliary model
5.3.1 The auxiliary model includes the main technical parameters of the product, the derived sequence code and the improved design sequence code. 5.3.2 The main technical parameters are represented by Arabic numerals and their limit values ​​should be taken. When it is necessary to represent two or more groups of parameters, they can be separated by a slash "".
5.3.3 The derived sequence code is represented by Roman numerals I, II, and III. 5.3.4 The improved design sequence code is represented by English letters A, BC, etc. When there are no main parameters in the auxiliary model, a short dash "" is used to separate the main model and the derived sequence code or improved design number. There is no sequence code for the first design product. 5.4 Compilation format
The example of the compilation format of packaging machinery model is shown in Figure 1. Main model
Auxiliary model
Improved design sequence code (can be omitted)
Derived sequence code (can be omitted)
Main technical parameters
Optional project code (can be omitted)
Structural type code
Classification name code
Example of the compilation format of packaging machinery model
Example 1: Measuring cup filling machine
Example 2: Weighing filling machine
Example 3: Negative pressure filling machine
Example 4: Hot pressure sealing machine
Example 5: Crimping sealing machine
Example 6: Pressure sealing machine
Example 7: Twist-type wrapping machine
Example 8: Etc. Pressure filling-sealing machine
Appendix A
(Informative Appendix)
Example of packaging machinery model
Maximum filling capacity (30mL)
Code of measuring cup filling machine
Maximum filling weight (500g)
Second transformation design
Number of filling valve heads (45 heads)
Sealing length (300mm)
Productivity (80 cans/min)
Number of sealing heads (8 pieces)
Productivity (250 pieces/min)
Derived type
Number of sealing heads (8 heads)
Number of filling valve heads (40 heads)
GB/T 7311--2008
GB/T7311—2008
Example 9: Granule filling-sealing machine
Example 10: Box opening-filling-sealing machine
Example 11: Adhesive labeling machine
Example 12: Wet cleaning machine
Example 13: Thermal sterilizer
Example 14: Mechanical strapping machine
Example 15: Automatic coding machine
Maximum filling Capacity (30mL)
Particle material
Productivity (100 pieces/min)
Main function (opening the box)
Productivity (80 pieces/min)
Bottle capacity (500mL)
Heating area (40m2)
Walking type
Packaging size (height 60cm)
(width 60cm)
Productivity (70 times/min)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.