GB/T 3744.2-1983 Compression-type tapered thread right angle tee fitting
Basic Information
Standard ID:
GB/T 3744.2-1983
Standard Name: Compression-type tapered thread right angle tee fitting
Chinese Name:
卡套式锥螺纹直角三通接头体
Standard category:National Standard (GB)
state:Abolished
Date of Release1983-06-17
Date of Implementation:1984-04-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:21.060.60;
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1984-04-01
other information
Release date:1983-06-17
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 3744.2-1983 Compression sleeve type tapered thread right angle tee joint body GB/T3744.2-1983 standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Compression-type tapered thread right-angle tee body
Male run tee-Body
UDC621.643.4.
GB3744.2—83
Marking example:
Compression-type tapered thread right-angle tee body with nominal force grade E and pipe outer diameter D of 14mm: body F14GB3744.2—83
Published by National Bureau of Standards on June 17, 1983
Implementation on April 1, 1984
3744.2-83
9'×sIN
s1×9TW
Technical conditions shall be in accordance with the provisions of GB 3765-8.
Additional Notes
GB 3744.2-83www.bzxz.net
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery Plant, Chongqing Heavy Automobile Research Institute, Dalian Modular Machine Tool Research Institute, Zhejiang Haiyan County Pipe Fittings Factory, Shanghai No. 1 Mechanical and Electrical Bureau Technology Information Institute, and the 708th Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Wang Muqin.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.