JB/T 8022.2-1999 Adjustable centering internal expander for machine tool fixture parts and components
Basic Information
Standard ID:
JB/T 8022.2-1999
Standard Name: Adjustable centering internal expander for machine tool fixture parts and components
Chinese Name:
机床夹具零件及部件 可调定心内涨器
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-08-06
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
publishing house:China Machinery Industry Press
Publication date:2000-01-01
other information
Focal point unit:Mechanical Science Research Institute
Publishing department:State Machinery Industry Bureau
Introduction to standards:
JB/T 8022.2-1999 This standard specifies adjustable centering internal expanders with specifications of 100~540mm. This standard was first issued in 1991 as GB/T 12876-91. JB/T 8022.2-1999 Adjustable centering internal expanders for machine tool fixture parts and components JB/T8022.2-1999 Standard download decompression password: www.bzxz.net
Some standard content:
ICS 25. 080. 01
Standard of the Machinery Industry of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixtures
Adjustable centering inner expansion-gear
The parts and units of jigs and fixturesVariable centering inner expansion-gearThis standard specifies adjustable centering inner expansion-gear with specifications of 100~540mm. 2 Dimensions
The dimensions are shown in the following figure and table.
3 Marking
3.1 Marking example:
D-300~540mm adjustable centering internal expander:
Internal expander
0JB/T8022.2—1999
300~540
Approved by the State Machinery Industry Bureau on August 6, 1999JB/T 8022.2—1999
Implementation on January 1, 2000Www.bzxZ.net
100~180
>180~300
>300~540
JB/T 8022.21999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.