GB/T 15561-1995 Static electronic track scale
Basic Information
Standard ID:
GB/T 15561-1995
Standard Name: Static electronic track scale
Chinese Name:
静态电子轨道衡
Standard category:National Standard (GB)
state:in force
Date of Release1995-05-02
Date of Implementation:1995-01-02
standard classification number
Standard ICS number:Metrology and Measurement, Physical Phenomena >> 17.100 Measurement of Force, Gravity and Pressure
Standard Classification Number:Instruments and meters>>Industrial automation instruments and control devices>>N13 Mechanical measuring instruments, automatic weighing devices and other testing instruments
Publication information
publishing house:China Standards Press
other information
Release date:1995-05-02
Review date:2004-10-14
drafter:崔美灵、王景祥、沈立人、王行方
Drafting unit:Dalian Weighing Instrument Factory, Jinan Weighing Instrument Factory
Focal point unit:National Technical Committee for Standardization of Weighing Instruments
Proposing unit:Light Industry Federation of the People's Republic of China
Publishing department:State Bureau of Technical Supervision
competent authority:China Light Industry Federation
Introduction to standards:
This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of static electronic track scales. This standard applies to static electronic track scales with load cells as force transmission structures and equipped with weighing displays. Special track scales and electromechanical combined track scales should also be used as a reference. GB/T 15561-1995 Static Electronic Track Scales GB/T15561-1995 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Static electronic rail weighbridge
Electronic static rail weighbridgeGB/T 155611995
This standard is not equivalent to the OIML non-automatic weighing instrument (International Recommendation No. 76-1) of the International Organization for Legal Metrology. 1 Subject content and scope of application
This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of static electronic rail weighbridges. This standard is applicable to static electronic rail weighbridges (referred to as rail weighbridges) with load cells as force transmission structures and weighing displays. Special rail weighbridges and electromechanical combined rail weighbridges should also be used as a reference. 2 Reference standards
Packaging storage and transportation pictorial signs
GB 6388
Transport packaging delivery and receipt signs
GB7551
Resistive strain gauge weighing sensor
GB7724 Technical conditions for weighing display controllers GB14249.1 Safety requirements for electronic weighing instruments
GB/T14249.2 General technical conditions for electronic weighing instruments GB/T 14250
Terms for weighing instruments
GB1563 Method for compiling weighing instrument product models
3 Terms
Terms should comply with the provisions of GB/T14250.
4 Product classification
4.1 Product model
Product models should be compiled in accordance with the provisions of QB1563. 4.2 Product specifications
The maximum weighing series is 100, 150, (200), (250) t. Note: The ones in brackets are not preferred.
4.3 Basic parameters
4.3.1 Verification graduation value
Verification graduation value e is expressed by the following numbers containing mass units: 1×10K, 2×10″, 5×10* (K is an integer). 4.3.2 Accuracy level is shown in Table 1.
Approved by the State Administration of Technical Supervision on May 5, 1995 168
Implemented on December 1, 1995
Accuracy level
Medium accuracy level
Ordinary accuracy levelwww.bzxz.net
Maximum weighing capacity
20 t
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.