This standard specifies the definition, technical requirements, test methods, inspection rules and requirements for marking, labeling, packaging, transportation and storage of polyester drawn yarn. This standard is applicable to polyester drawn yarn with a total density of 40~340dtex, a single yarn density of 1.0~5.6dtex, a circular cross-section, natural color and semi-dull. Other types of polyester drawn yarn can be used for reference. GB/T 8960-2001 Polyester drawn yarn GB/T8960-2001 Standard download decompression password: www.bzxz.net

GB/T 8960—2001
This standard is a revision of GB/T8960--1988 "Polyester Drawn Yarn". According to the rapid development of polyester in recent years and the characteristics of the introduction of advanced production equipment, the standard has been revised as follows: 1. Scope of application: from linear density 44~167dtex, single yarn linear density 1.7~5.6dtex, to total linear density 40~340dtex, single yarn linear density 1.0~~5.6dtex.
2. Requirements:
a) The assessment index classification is changed from the original two-grade classification based on the total linear density 76dtex to the two-grade classification based on the single yarn linear density 1.7dtex. And the quality index of the single yarn linear density 1.0~1.7dtex grade is added. b) The evaluation index values ​​of the items of linear density unevenness CV, breaking strength, breaking strength unevenness CV, breaking elongation, breaking elongation non-hooking rate CV, oil content and network degree in the physical indexes have all been increased to a certain extent. c) The test items and evaluation indicators of evenness have been cancelled and replaced by internal control of the enterprise. d) The items of simple weight and evaluation indicators of superior products have been added. e) The appearance items and indicators have been changed from the original item-by-item evaluation and unified regulations to being determined by the interested parties in the commercial contract according to the requirements of the downstream products.
3. Test method part: The specific operation methods and inspection conditions of appearance inspection have been added. This standard replaces GB/T8960-1988 from the date of implementation. This standard is proposed by the State Textile Industry Bureau. This standard is under the jurisdiction of Shanghai Chemical Fiber (Group) Co., Ltd. The drafting units of this standard: Shanghai Chemical Fiber (Group) Co., Ltd., Yizheng Chemical Fiber Co., Ltd. The main drafters of this standard: Yang Xiaoxing, Gu Weiqing, Lu Xiuqin, Guan Xiaoyan, Fang Xiaojuan. This standard was first issued in 1988.
National Standard of the People's Republic of China
Polyester drawn yarn
Polyester drawn yarn
GB/T 8960 --2001
Replaces GB/T8960-1988
This standard specifies the definition, technical requirements, test methods, inspection rules and requirements for marking, labeling, packaging, transportation and storage of polyester drawn yarn.
This standard is applicable to polyester drawn yarn with a total line density of 40-340dtex, a single yarn line density of 1.0-5.6dtex, a round cross-section, natural color and semi-dull. Other types of polyester drawn yarn can be used for reference. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB250--1995 Grey scale for assessing discoloration GB/T1250—1989 Method for expressing and determining limit values ​​GB/T 2828-1987
Batch-by-batch inspection sampling procedure and sampling table by attributes (applicable to inspection of consecutive batches) GB/T 3291.1—1997
GB/T 3291.3—1997
GB/T 4146--1984
GB/T 6502—2001
GB/T 6504-—2001
GB/T 6505—2001
GB/T 6508—2001
GB/T 8170—1987
GB/T 14343—1993
GB/T 14344—1993
GB/T 14346—1993
FZ/T 50001--1991
3 Definitions
3.1 Nominal linear density
Textiles-Terms of properties and tests of textile materials Part 1: Fibres and yarns Textiles-Terms of properties and tests of textile materials Part 3: General textile terminology (chemical fibre part)
Sampling method for synthetic filaments
Test method for oil content of synthetic filaments
Test method for heat shrinkage of synthetic filaments Test method for uniform hooking of dyed polyester filaments
Rules for numerical rounding
Test method for linear density of synthetic filaments and textured yarns Test method for breaking strength and elongation of synthetic filaments and textured yarns Test method for electronic yarn flatness of synthetic filaments Test method for interlacing degree of synthetic filaments Linear density specified in product specifications.
3.2 Production batch
The batch number of products produced continuously with the same raw materials, chemical materials, process conditions and product specifications, i.e. the batch number. 3.3 Inspection batch
In order to inspect the stability of product quality during continuous production, the inspection batch number of periodic sampling is adopted within a certain range. Approved by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on May 23, 2001 and implemented on December 1, 2001
GB/T 8960
3.4 ​​Other definitions are in accordance with GB/T3291.1, GB/T3291.3 and GB/T4146. 4 Requirements
The technical requirements for polyester drawn yarn include physical indicators and appearance items. Part 2 4.1 Physical indicators (see Table 1) are divided into two groups according to the size of the single yarn density, namely superior products, first-class products, and qualified products. Products below qualified products are substandard products.
4.2 Appearance items and indicators are determined by the interested parties through negotiation based on the requirements of the downstream products and included in the commercial contract. Table 1 Physical indicators of polyester drawn yarn
Linear density deviation rate, %
Linear density unevenness CV.%
Breaking strength, cN/dtex
Breaking strength unevenness CV, %
Breaking elongation, %
Breaking elongation unevenness CV, %≤
Boiling water shrinkage, %
Dyeing uniformity, (gray card) grade
Oil content, %
10Network degree, pieces/mbzxZ.net
11Simple weight, kg
Superior product
Fixed weight or fixed length
1. 0
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.