JB/T 2001.64-1999 Filters for water system pumping stations (PN=20MPa)
Basic Information
Standard ID:
JB/T 2001.64-1999
Standard Name: Filters for water system pumping stations (PN=20MPa)
Chinese Name:
水系统 泵站用过滤器(PN=20MPa)
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-06-28
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Fluid systems and general parts >> 23.100 Fluid power systems
Standard Classification Number:Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
Publication information
other information
Focal point unit:Metallurgical Equipment Standardization Technical Committee
Publishing department:Metallurgical Equipment Standardization Technical Committee
Introduction to standards:
JB/T 2001.64-1999 This standard is a revision of JB 2067-84 "Filters for hydraulic pump stations (Pg=200×100000Pa)". This standard specifies the type, size and technical requirements of filters. This standard is applicable to filters that play a coarse filtration role in high-pressure pipelines of water pump stations with a nominal pressure of 200MPa. This standard was first issued in 1984. JB/T 2001.64-1999 Filters for water system pump stations (PN=20MPa) JB/T2001.64-1999 Standard download decompression password: www.bzxz.net
Some standard content:
IC.s$ 23.110
Standard of the Machinery Industry of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system components
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
Standard of the Machinery Industry of the People's Republic of China
Water System
Filter for Pump Station
WatersystemFilterfnrwateracumulatnr(PN=20 MPa ]
This standard specifies the type, size and technical requirements of the filter JB2001.64-9
This standard is used in high and small pipes of water stations with a nominal pressure of less than 20MPa. It plays a filtering role. 2. Type and size
The type and size of the filter shall be in accordance with the provisions of Figure 1 and the table. Frequency: 2-plastic mother: 2-0 shape and size: 4-effective network 1: 5-two: 6 certain body: one liquid network: one return connection: external one cost rate: 10 one sales-boudoir:
Approved by the State Machinery Industry Bureau on June 28, 1999 and implemented on January 1, 2000
JBT20U..64.2
Jm200:.64.3bZxz.net
JB/1 2001.64 4
JB:T 2301.64 :
JBT 2MUL
JB/T 20K1.64 3
.Ts/T 20:1.64.4
3 Technical requirements
1]4×14
14m×18
155×20
IB/T 2001.64—1999
3.1 Nominal pressure 20MPa, test pressure 30MPa, test pressure 30m, seal and shell shall not be filled or leaked 3.2 Before assembly, the original sand in the shell must be removed. 4 Marking example
Nominal diameter 65mm filter:
Filter DN63JE/T200[.64199g
4 × M34
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.