This standard specifies the classification, code method, structural type, basic dimensions and technical conditions of non-grinding ball bearings. The use temperature of plastic bearings specified in this standard is -10~90℃. This standard is applicable to production, inspection by manufacturers and selection and acceptance by users. JB/T 7358-1994 Non-grinding ball bearings JB/T7358-1994 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
1 Subject content and scope of application
JB/T7358
This standard specifies the classification, code method, structural type, basic size and technical conditions of non-grinding ball bearings (hereinafter referred to as bearings). The use temperature of plastic bearings specified in this standard is -10℃～90℃. This standard is applicable to manufacturing, production, inspection and user selection and acceptance. 2 Reference standards
GB 6930
GR7811
Glossary of rolling bearings
Symbols for rolling bearing parameters
GB 307. 2
GB3526
GB 708
JB35301
Methods for measuring rolling bearing tolerances
Technical conditions for high-quality carbon structural steel
High-quality carbon structural steel sheets and strips
Cold-rolled low-carbon steel strips
Dimensions, shapes, weights and permissible deviations of cold-rolled steel sheets and stripsRolling bearing steel balls
Carbon steel balls
Chromium bearing steel, technical conditions
ZBJJ1020
JB/T 3574
JB/T3034
JB/T3017
JB/T3573
IB/T7051
3Symbols
Inspection rules for rolling bearings and their commodity partsRolling bearing product logo
Anti-rust packaging for bearing oil seals
Technical conditions for rolling bearing packaging cartons
Rolling bearings
Rolling bearings
Method for measuring radial clearance
Method for measuring and evaluating surface roughness of partsExcept for the following symbols, the remaining symbols and definitions shall comply with the provisions of GB7811 and GB4199, d: diameter of the inner ring rib of the bearing
t: nominal inner diameter of the thrust ball bearing seat||tt| |R: PU type bearing inner ring large fillet radius
E: PU type bearing outer window diameter
H. Universal ball bearing height
AH: Universal ball bearing single-height deviation
H,: Universal ball bearing shell height
: Universal ball bearing middle main ball axial distance
D: Universal ball bearing main ball diameter
Approved by the Ministry of Machinery Industry on July 26, 1994
Implemented on July 1, 1995Www.bzxZ.net
D,: Universal ball bearing middle width
: Universal ball bearing screw hole center distance
L: Universal ball bearing shell width
4 Classification and code method
4.1 Classification
JB/T 7358-94
Non-grinding ball bearings are divided into 9 categories according to their process characteristics, structural characteristics and load direction. See the table. Table 1 Types and codes
Machine-made ring bearings
Fully stamped ring bearings
Plastic ring bearings
Machine-made and stamped ring bearings
Metal and plastic ring bearings
1 Double and half outer ring bearings
Thrust bearings
Double-row bearings
Universal ball bearings
Each type of bearing can be derived from several variants, such as: Machine-made ring bearings
Inner ring variants
Type code
Basic structure
Full complement ball bearings
Bearings with cages
Full complement ball point contact bearings with outer covers
Full complement ball bearings with stamped outer rings with outer covers
With outer covers Stamped outer ring angular contact ball bearing
Plastic outer ring bearing with cage
Full complement ball bearing with double and half outer ring with outer cover
Flat-bottom thrust ball bearing with outer cover
Full complement double row ball bearing
Stamped outer shell flange type universal ball support
Inner ring widened on one side or both sides
Inner ring opening
Inner ring inner hole is elliptical
Inner ring inner hole is hexagonal
Shaft replaces inner ring
Threaded shaft replaces inner ring
Outer ring outer diameter is spherical
External variant:
Outer ring outer diameter is circular slide groove
Outer ring has flange
The basic structure and variant structure of various bearings are shown in Appendix A. 4.2 Code The non-spherical auxiliary bearing code consists of three sections: the first section is the type code, the second section is the basic size code, and the third section is the supplementary code. 4.2.1 Type code The type code is represented by the letter U or 12 letters before U, as shown in Table 1. 4.2.2 Basic size code The basic size code of general bearings is represented by four Arabic numerals. The first two digits from the left represent the outer diameter of the bearing (in millimeters), and the last four digits represent the inner diameter (d) in millimeters (no unit is marked). 58
Example: CU
JB/T 7358--94
Inner diameter is 8mm)
Outer diameter is 22 (mm)
Machined ring steel cage non-grinding ball bearing
b. The basic size of the Wanjian ball bearing is expressed in meters by the diameter of the main ball (rounded according to the digital rounding rules). Example: WU13 represents a hall-type ball bearing with a main ball diameter of 12.7 mm. 4.2.3 See Table 2 for supplementary codes.
Supplementary codes
S, C
WBI, WB
Using plastic cage
Chromium steel bearing (applicable to U type)
Bearing surface with sealing ring
Bearing with sealing cabinet on both sides
Bearing--with dust cover
Bearing with dust cover on both sides
With outer cover, with flange outer cover
Bearing surface with felt seal
Bearing one end closed
Shaft replaces inner ring
Inner ring surface Widened, inner ring with widened sides
Outer ring has an edge
Outer ring is spherical
Inner ring has a notch
Spherical outer ring
Inner ring has a hexagonal hole
Inner ring inner diameter is an eccentric hole
The bolt shaft replaces the inner ring
The bearing is installed on the plastic wheel hoop
The structure changes greatly, and the above codes cannot represent it. Note: When it has multiple of the above characteristics at the same time, its supplementary codes are arranged in order from top to bottom. Example of code: PRU
Example of marking:
08-SC1
With outer cover
Inner diameter
Outer diameter
Stamped outer ring non-grinding ball bearing with outer cover
Rolling bearing CU2208
JB/T 7358—94
Basic dimensions
5.1 Non-grinding ball bearing with machined steel cage JB/T7358--94
Machined grinding ball bearing with machined steel cage (Fig. 1) Basic dimensions are as follows: Table 3 Fig. 1 CU type
Limited specifications
(t: 1705
(1:1706
CE 2208
(t: 2316
t1: 281
t: 3512
5.2 years for reading full complement non-grinding ball bearings
7 anin
Cheng code
CU3515
u 4215
CU4220
CL 4515
CL: 4520
CU 5220
CU5222
CU 5225
Turn-made full complement non-grinding ball bearings (Figure 2) basic dimensions according to Table 4.
Figure 2 U type
Fudong code
1 2212
：24s
5.3 Double and half outer ring non-grinding ball bearings with special features/T7358--94
Bearing code"
1 3212
351 yuan
()411?
(：1120
1,4112
t:1722
t: 5125
Double and half outer ring non-grinding ball bearings with limited parts (Figure 3) Base wood measurement according to Table 5 HU type
Lebin code
: 1765
F1 2215
1i:22ne
f: 31G
Ht: 1*
T siain
Bearing code
HU 2410
HU2112
HU 2703
#It: 2710
HU2712
Hu2910
Hui 2912
HU:3305
Shaft palm code
HI:3308
H:3310
HI:3312
HU3512
H13515
-U3812
1n: 3815
Hu 4117
HU1120
Ht:4820
HU: -1822
F 5E20
5.4 Drawn outer ring non-grinding ball bearing with outer cover JB/T7358—94
Re-install 5
Bearing code
HL!5122
HU 5125
HU 5628
FlLi5728
HU 5930
HU 5932
HU 6732
H1: 6735
HU 79-40
HE: 79.15
HU 86E0
Basic dimensions of drawn outer ring non-grinding ball bearings with cover (Fig. 4) according to Table 6n
Fig. 4 PRU type
Bearing code
PRT: 2106
PRU:2408
PRU 2410
PRU2906
PRU 2908!
PRU 291O
PRt: 2912
5.5Non-grinding ball bearing with stamped ring with outer cover 0.6
Bearing code
PRU3510
PRU3512
PRU 3515
PRU 4310
PRL-312
PRU 4317
PRU 4320
Non-grinding ball auxiliary bearing with stamped ring with outer cover (Figure 5) Basic dimensions are according to Table 7. 572
Bearing code:
PU1706
PL:1708
PL: 2112
Pui2312!
PU 2408
PU2710
PL:2712
PUI 2715
PU 29121
PU3212
P: 321
Small, mn
JB/T 7358
Figure 5PU
Bearing code
5.6 Angular contact ball bearing with pressed outer ring and external spring 2
pl:3512
PU3515
PLE4020
PU1322
PU4922
PU 5225
PU 5932
PU5935
PU6232
PU 7845
PU8650
Basic dimensions of non-ground angular contact ball bearings with drawn outer rings and covered outer covers (Fig. 6) are as per Table 86PAU
15.5116.7
Bearing code
PAU 1703
PAL:1705
PAU 1906
PAU2312
PAU2106
PAL:2708
PAU 2915
PAU3510
PAU4012
5.7 Non-ground flat-bottom thrust ball bearing with outer cover 12.7
JB/T7358-—94
Bearing code
PAU 4015
PAU14320
PAU 4322
PAU4915
PAU5220
PAU 5922
PAU 5925
PAU 5928
PAU7025
Basic dimensions of non-ground flat-bottom thrust ball bearing with outer wing (Figure 7) are in accordance with Table 9. Figure 7 TU type
Bearing code
TU 2206
TU 2212
TU2610
TU 2612
TU2815
Tt3212
TII 34.15
Plastic outer ring non-grinding ball bearing
inch, nm
Plastic outer ring non-grinding ball bearing (Figure 8) basic dimensions are according to Table 10.574
Bearing code
TU 3615
TU 4220
TU 4425 | |tt |
CNU 2208
CNU 2406
CNU 24H1
CNU 2606
CNU 2610
5.9 Fully loaded double row non-grinding ball bearings
JB/T7358--94
Figure 8 CNU type
Bearing code
CNU 2806
CNU 2906
CNU 3006
CNU 3010
CNU 3212
CNU 3506
CNU 3515
CNU 401?
CNU 4720
Basic dimensions of fully loaded double row non-grinding ball bearings (Figure 9) are in accordance with Table 11. Figure 9DU plastic3512
PU3515
PLE4020
PU1322
PU4922
PU 5225
PU 5932
PU5935
PU6232
PU 7845
PU8650
Basic dimensions of drawn outer ring non-ground angular contact ball bearings with cover (Fig. 6) according to Table 86PAU
15.5116.7
Bearing code
PAU 1703
PAL:1705
PAU 1906
PAU2312
PAU2106
PAL:2708
PAU 2915
PAU3510
PAU4012
5.7 Non-ground flat bottom thrust ball bearing with outer cover 12.7
JB/T7358-—94
Bearing code
PAU 4015
PAU4320
PAU 4322
PAU4915
PAU5220
PAU 5922
PAU 5925
PAU 5928
PAU7025
Non-ground flat-bottom thrust ball bearing with outer wing (Figure 7) basic dimensions are in accordance with Table 9. Figure 7TU type
Bearing code
TU 2206
TU 2212
TU2610
TU 2612
TU2815
Tt3212
TII 34.15
Non-ground ball bearing with plastic outer ring
Inch, nm
Non-ground ball bearing with plastic outer ring (Figure 8) basic dimensions are in accordance with Table 10. 574
Bearing code
TU 3615
TU 4220
TU 4425 | |tt |
CNU 2208
CNU 2406
CNU 24H1
CNU 2606
CNU 2610
5.9 Fully loaded double row non-grinding ball bearings
JB/T7358--94
Figure 8 CNU type
Bearing code
CNU 2806
CNU 2906
CNU 3006
CNU 3010
CNU 3212
CNU 3506
CNU 3515
CNU 401?
CNU 4720
Basic dimensions of fully loaded double row non-grinding ball bearings (Figure 9) are in accordance with Table 11. Figure 9DU plastic3512
PU3515
PLE4020
PU1322
PU4922
PU 5225
PU 5932
PU5935
PU6232
PU 7845
PU8650
Basic dimensions of drawn outer ring non-ground angular contact ball bearings with outer cover (Fig. 6) are as per Table 86PAU
15.5116.7
Bearing code
PAU 1703
PAL:1705
PAU 1906
PAU2312
PAU2106
PAL:2708
PAU 2915
PAU3510
PAU4012
5.7 Non-ground flat bottom thrust ball bearing with outer cover 12.7
JB/T7358-—94
Bearing code
PAU 4015
PAU4320
PAU 4322
PAU4915
PAU5220
PAU 5922
PAU 5925
PAU 5928
PAU7025
Non-ground flat-bottom thrust ball bearing with outer wing (Figure 7) basic dimensions are in accordance with Table 9. Figure 7TU type
Bearing code
TU 2206
TU 2212
TU2610
TU 2612
TU2815
Tt3212
TII 34.15
Non-ground ball bearing with plastic outer ring
Inch, nm
Non-ground ball bearing with plastic outer ring (Figure 8) basic dimensions are in accordance with Table 10. 574
Bearing code
TU 3615
TU 4220
TU 4425 | |tt |
CNU 2208
CNU 2406
CNU 24H1
CNU 2606
CNU 2610
5.9 Fully loaded double row non-grinding ball bearings
JB/T7358--94
Figure 8 CNU type
Bearing code
CNU 2806
CNU 2906
CNU 3006
CNU 3010
CNU 3212
CNU 3506
CNU 3515
CNU 401?
CNU 4720
Basic dimensions of fully loaded double row non-grinding ball bearings (Figure 9) are in accordance with Table 11. Figure 9DU plastic
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.