Some standard content:
IC537.040.20
G80,GB1
Chemical Industry Standard of the People's Republic of China
IIG/T 3008~-3010—1999
HG/T3635--3641—1999
Photosensitive Materials and Test Methods
Published on 1999-06-16
2000 06-01 implementation
National Petroleum and Chemical Industry Bureau issued
Reference number: 3737
IIG/3635-1999
This standard adopts the international standard 15782:1951 photography - 120 and 220 standard adhesive tape 3 This standard is from the date of the pool, the same as the 120 tape size part of HG/T35213881S040C/27 black and white full-color photographic negative film 3 [TG/T2696954IS01U/21\single photographic tape>. Appendix VIII of this standard, B, C are all attached to this standard. This standard was originally issued by the Technical Supervision Department of the Ministry of Chemical Industry: This standard was established by the Ministry of Chemical Industry's Material Standardization Technical Unit; the drafting unit is: China Film Company. The origin of ISO is Chinese. It is the International Organization for Standardization (ISO). It is the world's federation of standardization bodies (IS member bodies). The work of formulating international standards is usually done through technical committees. Each member body of a subject that has established a technical committee has the right to participate in the technical committee. Governmental and non-governmental international organizations that have contacted IS can also participate in the work. In all matters of electrical standardization, ISO works closely with the International Electrotechnical Commission (IEC) C. International Standard drafts confirmed by the technical committee must be circulated to the member bodies for voting. At least 7 of the members must have voted before they can be published as international standards.
International Standard 1S)732 is the second edition of the IS()/TC12 Photographic Technology Committee. The second edition (190732, 1482) has made technical changes. The appendix A, 3 and 2 of this international standard have all been recorded.
TS)732:1982 has defined the size of 127.62C and 120 specifications. Since the publication of this international standard, cameras using 127 and 620 specifications of film are no longer produced. Now these two specifications of film are rarely used. , and their demand is also decreasing rapidly. On the other hand, new film automatic cameras tend to use the new 22-centimeter specifications and the original 120-centimeter specifications. 132 is willing to only determine the film size of 12C and 220 specifications according to this change in the market. TS)
1 Fan Guo
People's Republic of China Chemical Industry Standard
120 and 220 Specifications Film Size
P'hotography—-tilmdiniensions—120 and220 sizeHG/T3635--.1999
IDT150737:7991
This standard specifies the dimensions of 120 and 225 film and the reels of the two films, and describes the dimensions of the film itself, 120 specification adhesive backing paper, 22 specification adhesive guide paper, name paper and label, as well as their respective positions: it also specifies the front and rear dimensions of the first commercial film and the back dimensions of the two sides.
This standard mainly uses the metric system
2 Referenced standards
The following standards contain the following provisions, which have become standard texts through reference in this standard. At the time of publication of the standard, the versions shown are valid. All standards are subject to revision. Parties using this standard should discuss the possibility of using the latest version of the following standards: 50:19 Standard for quick adjustment and/or testing of vehicle height (150) 5541973 Standard for quick adjustment and/or testing - Specification 3 Definitions
The following definitions apply to this standard.
3.1 Paper (12o current stock filial use) backingFeper(for12xinfrollflms) is a protective paper strip connected to the film, usually with a black backing on one side and a colored unique digital device on the other.
3.2 Tape auxiliary corecorefapocl
A convex and concave convex part connected to the backing and the adhesive design, usually on the colored side, with the camera's precision
3. 3 creer
When the film strip and backing paper are wound on the reel, the length of the film strip is compared with the length of the film when it is unfolded or flat. The reason for this amount is that the backing paper on each continuous film strip is longer than the film strip, and the maximum height at the end of the film strip is 3.4, which includes the excess glue produced by the developer clip. 3.5 Noise code exosce
is on the outside of the backing paper in 1 grid? Generally, the number of rescue codes or number or effect codes on the color side of the paper are used to determine the spacing between the light screen and the camera's dense holes to continuously display the fast settings. 3.6 Film edge lagexafspool
The thickness of the inner end of the core is continuously pressed, and the main function of the edge between the two film and the backing paper (or the lead paper and the tail paper) is to prevent the film from lag:
3. 7 Chain kcey als
. s. 1e.
State Petroleum and Chemical Industry Bureau 1999-06·16 Standard 2090-06-01 Implementation
JIG/T36351999
3. Traction paper 22 frame film) [eude (fr22Useoful]fil is transmitted in the shorter level of the second side of the film, see 3.15), 3.9 Film length Eengthaf film
The length of the film strip.
3.10 The effective length of the projection film 2rojccredfilmlergth When 12) The heat grid glue is released in the glue axis: the distance between the two sides of the master film must be measured along the back: the length of the projection film is equal to the length of the unfolded glue.
3.1 Automatic camera positioning mark Tcgisrerarkorautamaticcancras120 The symbol or mark of the heat grid is on the back at a specific distance from the number: 220 The symbol or mark of the specification stock is on the paper at a specific distance from the effective film. The positioning mark of some types of cameras is sufficient for the film to count automatically, and is indicated by a sharp scale at both ends, but the form is optional.
Specification film near the end of the month with a dash represents a kind of positioning aid, this kind of mark is "approved", for other cameras with relatively stable size. "The position of the virus is marked with a head. 3. 12 cavity l. il
transparent plastic sheet (report fire m original dimension rate matching): surface system photosensitive layer: surface coated with light-proof anti-blood layer of the right year gelatin! : cut into strips (generally 1.mm wide): with backing paper (120 both tape) or with point guide paper and grab total paper (22U specification stock roll), roll you on the school reel, and then install the film under the moonlight. 3-13sFaltorollfl
The two sides of the shaft core are connected with a piece of light-proof edge, flange, and film strip and backing paper (or rate guide paper Fanny paper) to form a tape, and the bite roll and some ends must have measures or equivalent meal structures. To mesh with the camera roll, chain, 3.14 film header margin.url uli.rgin
film bad point to a picture sink starting point return. This includes the fire developer or stick the film tape surplus. 3.15 Trailer (specification government use trailer (forisealfilms) in the cavity film at the end of the non-layered coil paper strip (full 3.5). 3.16 Turn turnirgsloskeyls
change in the drawer: can and the rod machine film reverse meshing, this realization can be card ten-shaped, 3.17 can be used as a surface of the film and the rubber stop length: he is dry 1 does not include the film and the tail of the film surplus, in Figure 1 and Figure 3 at the end of the film science The end is indicated by a virtual load.
318 hole f
usually stands on the camera part, because there is a window hole (usually in color), when the scanner is connected, the code on the paper can be seen from the window hole.
4 size
This size is reduced by 11, and the 18) 55 regulations are specified. Under the standard conditions of (23+2) (and (50-5) are simplified.
4.112 specification film and backing paper are shown in the box shown in Figure 1, and the receiver is shown in Figure 1. The film is self-made when the receiver is connected.
HG/T3635.
The last one and the transmitted quantity
account number are cut to the current system selection, and the merchant determines it by himself. H06
is a small mountain news
: there is no other explanation: the new ruler is used to measure the meter: the longest length is t,
arrives at the school piece of meat.4n.n.tc3ian,no1s)
530 on 2
257 = 20
complete! Inspection tape generation
sea technology to
three of the label
J k ram I
to the film plus the sea consultation increase the total signature. 431.
in order to say that the price is not more than 28). The original degree of the paper is not more than 2) the net weight of the net material should be (.), letter: specification proofreading film and back system
4.2 of course both the format of the photo, pull paper. The size of the paper should be in line with the value of food 2,
tuni tea
German paper
2 29 bs tts
3±3 see note 6
HG/T3635
194 518.5
Comparative length of film (2)
whole film)
France one country position
sweep the film wind to the paper
paste mark (see note 4)
a single side position
court non- ... m)
Recommended storage difference in the format environment can be solved by the length of the paper without leaving: 1.12ia). Of course, the whole glue design should not exceed 15ma(.u). If the glue pressure is applied, the two defense signatures can be connected in the story piece. The following is quoted in the correct area. The heart is dead. The European defense is correct. The most surface has 50 inspections to prevent and control signatures and the most surface is suitable or diagram? 22 specifications no piece, traction can be towed paper room meter north:
1 [S.199 and more than un and Mo small space
use this use of 1 situation of the stock, you are allowed to change.).s
4.3120 and 220 specifications of the stock axis length small H/T3635-1999
should be shown in the room with the letter, this size applies to the two inner surfaces are planes before H is parallel: the edge of the film is pulled. Size 』
t, 201
core size includes any more than all the image quantity · example mountain group (recorded) m
calibration volume more than two states convex image need to have a leader, supply machine old auxiliary Sichuan, the inner ball center Sichuan ten shape inner key still, electric electric manufacturer own heart. 3
Out of a power deduction (the same period of evil, the total amount of seat increase, V-1 and the rear axle opening or the total positive half of the model 5120 and 22° specification bite tape adhesive auxiliary packaging marking
5.1 Information
Sufficient information should be provided on the packaging to ensure the correct use of the product. For identification, the package should be marked with:
a) product name and specifications
b) transportation and storage conditions (plus safety lighting
) transportation and storage conditions.bzxZ.net
Any other packaging should meet one or more requirements, and the following appropriate terms should be used for marking (see Note 1): Product name Trade name
Manufacturer name or trademark:
Manufacturer's product information record (see 2); S photosensitive film
The number of units contained in the package (if more than one)! 3
HG/T3535—1999
The photographic number and/or original axis number corresponding to the specifications of the printed product!
Expiration date or "quantity end date" or processing code; initial conditions recommended by the manufacturer (see Note 2):..Additional conditions and safety lighting conditions recommended by the manufacturer (see 2) Note I: If the national regulations have other regulations on packaging labels, the current status of ... Paper.
wood standards give the maximum and minimum sizes of film strips and reels, while the minimum size can be given by the standard 220-gauge film gauge and the 120-gauge film gauge. According to the roll label, you can draw the same film reel in the same size F film length can be nearly twice the need. By not using paper, but using the guide paper to drag the film reel, the same size film reel can be made. The development of this controlled length film is mainly for special design professional modification use, 31
HG/T 3635-1959
Appendix B
(Reminders)
Dawn Digital
12 series of film have a series of rules. Each series has four specific formats related to the camera that produces the film format: when equipped with a camera with a hole, it is possible to use the digital film series, these are: Aerxsm (2.2inx3.2in):
+-fcmxfem2.25mx2.25in:
6 Frames 4.5cmxGem.G25inx2, ia. In addition, some of the 120) series of film are not suitable for digital cameras, and they produce small pictures,
6 n xt n3. 2 ixz. is ini.1. Information
Sufficient information should be provided on the packaging to ensure the proper use of the product. For identification, the packaging should be marked with:
a) Product name and specifications
b) Conditions (including safety and lighting
) Transport and storage conditions.
Any package should be marked with one or more of the following requirements, and the following appropriate terms should be used for marking (see Note 1):
Product name
Trade name
Manufacturer's name or trademark
Manufacturer's product information (see Note 2);
Number of units contained in the package (if more than one)! 3
HG/T3535-1999
Photographic number and/or original axis number corresponding to the specifications of the printed product!
Expiration date or "expiration date" or processing code; initial conditions recommended by the manufacturer (see Note 2): .. Manufacturer recommended conditions and safety lighting conditions (see 2) Note I: National regulations have other regulations on packaging labels, and the current status of ... Paper.
wood standards give the maximum and minimum sizes of film strips and reels, while the minimum size can be given by the standard 220-gauge film gauge and the 120-gauge film gauge. According to the roll label, you can draw the same film reel in the same size F film length can be nearly twice the need. By not using paper, but using the guide paper to drag the film reel, the same size film reel can be made. The development of this controlled length film is mainly for special design professional modification use, 31
HG/T 3635-1959
Appendix B
(Reminders)
Dawn Digital
12 series of film have a series of rules. Each series has four specific formats related to the camera that produces the film format: when equipped with a camera with a hole, it is possible to use the digital film series, these are: Aerxsm (2.2inx3.2in):
+-fcmxfem2.25mx2.25in:
6 Frames 4.5cmxGem.G25inx2, ia. In addition, some of the 120) series of film are not suitable for digital cameras, and they produce small pictures,
6 n xt n3. 2 ixz. is ini.1. Information
Sufficient information should be provided on the packaging to ensure the proper use of the product. For identification, the packaging should be marked with:
a) Product name and specifications
b) Conditions (including safety and lighting
) Transport and storage conditions.
Any package should be marked with one or more of the following requirements, and the following appropriate terms should be used for marking (see Note 1):
Product name
Trade name
Manufacturer's name or trademark
Manufacturer's product information (see Note 2);
Number of units contained in the package (if more than one)! 3
HG/T3535-1999
Photographic number and/or original axis number corresponding to the specifications of the printed product!
Expiration date or "expiration date" or processing code; initial conditions recommended by the manufacturer (see Note 2): .. Manufacturer recommended conditions and safety lighting conditions (see 2) Note I: National regulations have other regulations on packaging labels, and the current status of ... Paper.
wood standards give the maximum and minimum sizes of film strips and reels, while the minimum size can be given by the standard 220-gauge film gauge and the 120-gauge film gauge. According to the roll label, you can draw the same film reel in the same size F film length can be nearly twice the need. By not using paper, but using the guide paper to drag the film reel, the same size film reel can be made. The development of this controlled length film is mainly for special design professional modification use, 31
HG/T 3635-1959
Appendix B
(Reminders)
Dawn Digital
12 series of film have a series of rules. Each series has four specific formats related to the camera that produces the film format: when equipped with a camera with a hole, it is possible to use the digital film series, these are: Aerxsm (2.2inx3.2in):
+-fcmxfem2.25mx2.25in:
6 Frames 4.5cmxGem.G25inx2, ia. In addition, some of the 120) series of film are not suitable for digital cameras, and they produce small pictures,
6 n xt n3. 2 ixz. is ini.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.