This standard specifies the requirements, sampling, identification items and identification rules for the use identification of dangerous goods packaging for water transport. This standard applies to the use identification of dangerous goods packaging for water transport except for Class 2, Class 7 and Item 6.2 of Class 6 in Chapter 4 of GB19270.1-2003. This standard does not apply to pressure receptacles, packages with a net weight greater than 400kg, and packages with a volume greater than 450L. GB 19270.3-2003 Safety Specifications for Inspection of Dangerous Goods Packaging for Water Transport Use Identification GB19270.3-2003 Standard Download Decompression Password: www.bzxz.net

The 4th, 5th and 6th clauses of this standard are mandatory clauses. The rest are recommended clauses. This standard is one of the six complete specifications for the inspection of dangerous goods packaging. It is in line with the safety regulations for dangerous goods packaging in water transport. This standard is not as consistent as the United Nations "Regulations on the Transport of Dangerous Goods" (2002) and the International Maritime Code for Cargo Transport (21st edition). Its technical content related to packaging is completely consistent with the above regulations and rules. The standard text format is GE/1=.2000. This standard is compiled by the whole The National Dangerous Chemicals Management Standard SATL251 was proposed by the National Dangerous Chemicals Management Standard Technical Committee. This standard is responsible for the following units: Jiangxi Provincial Immigration Inspection and Quarantine Bureau, Ministry of Transport Transportation Science Research Institute, and the following units: Shanxi Municipal Immigration Inspection and Quarantine Bureau, Anhui Provincial Entry Inspection and Quarantine Bureau, Exit Immigration Inspection and Quarantine Bureau, Shanghai Municipal Immigration Inspection and Quarantine Bureau, and the main drafters are: Zhang Shao, Wen Jin, and Er Yan. This standard is mainly for the revision of the following: 1 Scope
| Safety specification for the inspection and use of dangerous goods packaging for water transportation
CB19270.3-2 003
The supplementary standard specifies the requirements for the packaging of hazardous goods for road transport, sampling, identification and certification. The standard is applicable to the packaging of hazardous goods for water transport other than Class 7 and Class 6, Item 6.2.
This standard does not apply to pressure vessels, net weight greater than 4CCkg, and packaging with a capacity of more than 1501.2 Normative references
The clauses of the following documents may become the clauses of this standard through the use of this standard. All subsequent changes (excluding auxiliary 1. The latest version of the documents shall apply to all referenced documents without a date. GB10570.1-2003 Specification for the inspection of dangerous goods by batches GB1527C.2-2003 Specification for the inspection of dangerous goods by water transport Safety standards GB1527C.2-2003 Specification for the inspection of dangerous goods by road transport Safety standards GB1527C.3-2003 Specification for the inspection of dangerous goods by road transport 3 Terms and definitions
GE1S373.1-2003 Terms and definitions
GE1S373.1-2003 Terms and definitions
4. 1: General requirements 1.1 Appearance of packaging The packaging should be clear and in accordance with the relevant requirements of GB19270.1-3. No waste, leakage or leakage is allowed. 4.1.2 The container selected by the user must be suitable for the nature of the dangerous goods transported by water, and its properties must comply with the current provisions of (19270.1-200363:9270.22553).
4.1.3 The packaging category of the dangerous goods is equal to or higher than the packaging category required by the cargo yard. 1.4 In the following cases, the following general characteristics inspection report shall be submitted according to the classification of dangerous goods (report example is not included in Appendix A): 1.2. Production or not listed in the English version; 2.3. First shipment or shipment on the box: 3.4.5. When necessary (such as the actual contents of the goods delivered to the customer are not in accordance with the standard), 4.5. The first use of plastic containers or the contents of the containers that have fallen off the layer shall be stored for more than 6 months according to the chemical penetration test report (such as the production agent list in column 133| |tt||4.1.6 Dangerous goods shall not exceed the capacity of the container specified in the United Nations Protocol on the Transport of Dangerous Goods II. The volume of the container specified in the Protocol on the Transport of Dangerous Goods II shall not exceed the capacity of the container specified in the ... 3—2003
4.1.9 The cargo shall not be mixed at the container end or between the inner and outer containers. 4.1.15 The dangerous cargo and the containers to be checked shall not have any impact on the semi-permeable and dangerous chemical reactions. 4.1.11 The radiation material shall not contain any dangerous chemicals with the dangerous cargo. It shall ensure that the container can completely absorb and retain all the dangerous cargo when it is broken, so as not to cause the substances to leak out from the outer container. 4.1.12 The protective material and the auxiliary materials shall not be mixed with the dangerous cargo. Dangerous goods will react chemically and reduce their required performance. There should be enough cushioning and filling materials to prevent the whole container from moving.
4.2 Special requirements
4.21 Requirements for general containers
4.2.1.1 The size of the container should be tightly matched and equipped with appropriate seals. The tightness of the container should meet the requirements of special tightness
4.2.1.2 The second container and the second container should be equipped with appropriate seals. No matter what kind of seal is used, it should be tight and tight. For the requirements, the boxes should also be nailed as follows:
4.2.2 Requirements for box-type containers
4.2.2, 1 When nailing wooden molds and external materials, the nails should not protrude from the nails. The edges of the nails must be twisted and the packing tape should be tightly bound to the box.
4.2.2.2 The corrugated cardboard box should be intact and the seal should be firm and firm. Packing the box body, 4.2.3 Requirements for bag-type containers
4.2.3.1 The outer seal should be made of stainless steel and the outer volume of the lining bag should not be relied on. The mouth should be more than 50mm long and the stitching should be more than 50mm. The needle grid should ensure that the contents are not leaking and the density of the contents should not be too low. The contents of the bag should be filled with heat. The density of the inner bag should be guaranteed to be leaking. 4.2.3.2 The inner bag should be sealed with a collar around the bag, no matter it is pure milk, adhesive or other types of sheets. The contents must not be leaking. 4.3.3 When sealing, the inner bag should be tightly wrapped with a collar, tied with a knot, and then the hoop or folded down, pressed with a rope, and the hole should be tightly tied. If it is double-layered, the holes can be separated according to this. 4.2.3.4 When the bag is fully sealed, no holes are allowed to exist unless there is air in the bag or adhesive. If it is not effective, the bag should be layered and bonded. 4.2.4 Requirements for combination design
4.2.4, 1 When the container is filled with liquid, the seal shall comply with the liquid abuse village opening requirements: if the gas needs to be evenly distributed, the gas seat shall comply with the original design of the port. 4.2.4.2 For containers that can be filled with liquids such as glass, the container shall comply with 1 packaging. 4.2.2.3 The materials shall meet the requirements of 1.11 of this standard. 4.2.4.4 For non-waterproof boxes, the inner container or small container must be used. 5 Sampling 5.1 Inspection batch The raw materials and packaging of the same structure and the same production are an inspection batch. The maximum batch is 1000. 5.7 Sampling rules According to (T282, the sampling is carried out in accordance with the standard. The sampling is carried out in accordance with the standard. 5.3 Sampling quantity Sampling efficiency table 1 Table 1 Sampling efficiency Sampling efficiency The unit is piece 6 Identification items Batch standard 16-23 9, --150
2R1. - 523
E1-.-1 363
1257205
3201-1:c
Table'(continued)
6.1 Check whether the total volume of dangerous goods for water transport meets the requirements of 4.t.1.4.1.3. GH19270.3-20C3
Documents for parts
6.2 Check whether the selected volume is suitable for dangerous goods and whether it is equal to the volume of dangerous goods packaging. Check whether there is a micro-inspection report
G.3 for T4, 6.4 Check whether the dangerous goods transported by water meet the requirements of 4.1.6. 6.5 Check whether the required loading volume of the dangerous goods packages containing liquids or gases meets the requirements of 4.1.7. 6.6 Analyze the dangerous goods or gases of the insured in detail, and make a standard inspection for each type of dangerous goods to see whether the protective agent meets the requirements of 4.1.8. 6.7 Check whether the seal of the combined container meets the requirements of GB19270.[2323's toughness, the outer length of the device is easy to explain whether it is other types of packaging, and the quality of the attached materials is derived from 4.1.11 as the current requirements, 6.B inspection special hazardous goods and the associated materials, the development and village materials. Additional materials such as containers and wires should be used to avoid chemical exposure, and the following performance requirements should be adjusted:
6.9 inspection year 63270.123's requirements:
6.10 inspection environment, type of container whether it meets the requirements of 1.1, 6.11 inspection sales and driving layer Li meet the requirements of 2.2.2. 6.12
Whether the seal is in accordance with the requirements of 4.2.3
7 Inspection rules
7.1 The manufacturer of dangerous goods packaging should ensure that the dangerous goods packaging used for transportation meets the requirements of the transportation standards and the customs inspection department shall conduct appraisal according to this standard. The user of dangerous goods has the right to read the provisions of the dangerous goods certification and select the packaging of the dangerous goods for sale for inspection:
7.? : The packages of dangerous goods transported by water shall be batched, and the order quantity shall be considered as one batch, but the maximum batch shall not exceed the maximum batch specified in 5.1. 7.3 The validity period of the use inspection report shall be calculated from the date of delivery of the dangerous goods. The validity period of the use inspection report of the packages containing Class 8 dangerous substances and corrosive substances shall not exceed 6 months, and the validity period of the use inspection report of other dangerous goods shall not exceed 1 year, but this validity period shall not exceed the validity period of the performance test report. 7.4 The test rules show that if all items are qualified, the batch of dangerous goods packages transported by water shall be unqualified. After the above items are qualified, the use inspection report shall be issued. Please refer to Appendix C for inspection. 7.5 Disqualified penalties: After the qualified packaging is returned to the original state or other qualified packaging is removed, it shall be submitted for inspection again, and its strictness remains unchanged. 7.E For the unqualified packaging, it is not allowed to be delivered for transportation. Appendix (Scientific Appendix) Example of Classification and Classification of Hazardous Properties Inspection Report (see Table A1) Example of Classification and Classification of Hazardous Properties Inspection Report (name of inspection agency) Applicant: # Number: Test requirements: According to the table, the inspection and identification manual for hazardous materials transportation and transportation is required: Inspection objectives: Classification and classification of hazardous materials, basic physical and chemical quality inspection and identification, explosiveness inspection and identification III. Gas inspection case number: GB 19270.32003
Sample name:
GB19270,3—2003
IV. Inspection and identification of flammable liquids
V. Inspection and identification of flammable solids
VIII. Inspection and identification of oxidizing properties
VII. Inspection and identification of toxicity
VIII. Inspection and identification of corrosive properties
IX. Other hazardous characteristics
Table A, (continued)
X. Conclusion
1 Prohibited from transportation,
2 Causes special use
3 Dangerous goods category:
First class training;
5 Package transportation:
5 Portable media are generally not used for transportation. Nitrate hospital method;
8 Interest:
9 CASCOHE
ICEC CODE,
Packing mark,
? Sincere price:
.: Treatment:
Table 4.1 Research)
Reverse this packaging transformer against the person and the compatibility test, before the string person:
Flight:
Strong! 1 No real empty seal, this report is invalid. The copy of the vehicle report is invalid.
3 This is valid as of the date of the notice,
According to the risk machine,
GB 19270.3—2003
GR1927Q,3—2003
Appendix B
[Informative Appendix]
Example of chemical compatibility test report
The format of chemical compatibility test report is shown in Table 1. Table B.1 Format of chemical compatibility test report
Chemical compatibility test report
Packing unit
Packaging production unit
Container name and
Design type
Packaging qualification name
Dangerous goods classification
Dangerous goods classification
Person in charge of reporting
Inspector!
Item:
Our inquiry number
Number of samples
Quantity)
Personal inspection report format see Table 2.
(Information type)
Example of inspection report
Table 1 Format of inspection report
×××(Inspection machine name)
Dangerous goods transport packaging container inspection report
Year
Name and specification of packaging machine:
Cargo packaging code
Inspection container type
Inspection report number|| tt||Mode of transport
Dangerous goods
West dangerous goods classification
Inspection package quantity
Date of completion of dangerous goods classification
Dangerous effect according to store
Batch inspection according to order
Etc.,
This order is valid until T
Exclusive use
(Welcome)
Complex effect quantity
G8 19270.3—2003
Packaging whole product mark No. 2:
Dangerous goods category
Yuan dangerous goods relative to the map
Middle piece gross use
Ansan education
Station surplus education quantity
Relatively speaking3—2003
IV. Inspection and identification of flammable liquids
V. Inspection and identification of flammable solids
VIII. Inspection and identification of oxidizing properties
VII. Inspection and identification of toxicity
VIII. Inspection and identification of corrosive properties
IX. Other hazardous characteristics
Table A, (continued)
X. Conclusion
1 Prohibited from transportation,
2 Special reasons
3 Dangerous goods category:
First class training;
5 Packing method:
5 Portable media are generally not used for transportation. Nitrate method;
8 Note:
9 CASCOHE
ICEC CODE,
Packing mark,
? Sincerely transport price:
.: Treatment:
Table 4.1 Research)
Reverse this packaging transformer against the pedestrian and the compatibility comparison test, before the string:
Flight:
Strong! 1No real complete empty seal, this report is invalid. The copy of the vehicle report is invalid.
3This is valid as of
,
According to the risk machine,
GB 19270.3—2003
GR1927Q,3—2003
Appendix B
[Informative Appendix]
Example of chemical compatibility test report
The format of chemical compatibility test report is shown in Table 1. Table B.1 Format of chemical compatibility test report
Chemical compatibility test report
Packing unit
Packaging production unit
Container name and
Design type
Packaging qualification name
Dangerous goods classification
Dangerous goods classification
Person in charge of reporting
Inspector!
Item:
Our inquiry number
Number of samples
Quantity)
Personal inspection report format see Table 2.
(Information type)
Example of inspection report
Table 1 Format of inspection report
×××(Inspection machine name)
Dangerous goods transport packaging container inspection report
Year
Name and specification of packaging machine:
Cargo packaging code
Inspection container type
Inspection report number|| tt||Mode of transportwwW.bzxz.Net
Dangerous goods
West dangerous goods classification
Inspection package quantity
Date of completion of dangerous goods classification
Dangerous effect according to store
Batch inspection according to order
Etc.,
This order is valid until T
Exclusive use
(Welcome)
Complex effect quantity
G8 19270.3—2003
Packaging whole product mark No. 2:
Dangerous goods category
Yuan dangerous goods relative to the map
Middle piece gross use
Ansan education
Station surplus education quantity
Relatively speaking3—2003
IV. Inspection and identification of flammable liquids
V. Inspection and identification of flammable solids
VIII. Inspection and identification of oxidizing properties
VII. Inspection and identification of toxicity
VIII. Inspection and identification of corrosive properties
IX. Other hazardous characteristics
Table A, (continued)
X. Conclusion
1 Prohibited from transportation,
2 Special reasons
3 Dangerous goods category:
First class training;
5 Packing method:
5 Portable media are generally not used for transportation. Nitrate method;
8 Note:
9 CASCOHE
ICEC CODE,
Packing mark,
? Sincerely transport price:
.: Treatment:
Table 4.1 Research)
Reverse this packaging transformer against the pedestrian and the compatibility comparison test, before the string:
Flight:
Strong! 1No real complete empty seal, this report is invalid. The copy of the vehicle report is invalid.
3This is valid as of
,
According to the risk machine,
GB 19270.3—2003
GR1927Q,3—2003
Appendix B
[Informative Appendix]
Example of chemical compatibility test report
The format of chemical compatibility test report is shown in Table 1. Table B.1 Format of chemical compatibility test report
Chemical compatibility test report
Packing unit
Packaging production unit
Container name and
Design type
Packaging qualification name
Dangerous goods classification
Dangerous goods classification
Person in charge of reporting
Inspector!
Item:
Our inquiry number
Number of samples
Quantity)
Personal inspection report format see Table 2.
(Information type)
Example of inspection report
Table 1 Format of inspection report
×××(Inspection machine name)
Dangerous goods transport packaging container inspection report
Year
Name and specification of packaging machine:
Cargo packaging code
Inspection container type
Inspection report number|| tt||Mode of transport
Dangerous goods
West dangerous goods classification
Inspection package quantity
Date of completion of dangerous goods classification
Dangerous effect according to store
Batch inspection according to order
Etc.,
This order is valid until T
Exclusive use
(Welcome)
Complex effect quantity
G8 19270.3—2003
Packaging whole product mark No. 2:
Dangerous goods category
Yuan dangerous goods relative to the map
Middle piece gross use
Ansan education
Station surplus education quantity
Relatively speaking
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.