GB/T 5789-1986 Hexagon flange bolts, enlarged series, grade B
Basic Information
Standard ID:
GB/T 5789-1986
Standard Name: Hexagon flange bolts, enlarged series, grade B
Chinese Name:
六角法兰面螺栓 加大系列 B级
Standard category:National Standard (GB)
state:in force
Date of Release1986-01-17
Date of Implementation:1986-10-01
standard classification number
Standard ICS number:Mechanical systems and general parts>>Fasteners>>21.060.10 Bolts, screws, studs
Standard Classification Number:Machinery>>General Parts>>J13 Fasteners
associated standards
Procurement status:≈ISO/DP 8102-84
Publication information
other information
Release date:1986-01-17
Review date:2004-10-14
Drafting unit:Machinery Standards Institute
Focal point unit:National Technical Committee for Fastener Standardization
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 5789-1986 Hexagonal Flange Bolts, Enlarged Series, Grade B GB/T5789-1986 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Hexagon flanke bolts-Heavy
series-Product grade B
UDC 621.882.6
GB5789-86
This standard specifies hexagonal flange bolts with wide thread specifications of M5 to M20 and wide width across flats of the heavy series and grade B. Reference standard
GB196-81 "Basic dimensions of ordinary threads (diameter 1 to 600mm)"! GB197-81 "Ordinary thread tolerance * fit (diameter 1 ~ 355mm)", GB2-85 "Fasteners-ends of external threaded parts": GB3098.1-82 "Fasteners Mechanical Properties Bolts, Screws and Studs": GB3098.6-86 "Fasteners Mechanical Properties Stainless Steel Bolts, Screws, Studs and Nuts" 1GB3103.1-82 "Fasteners Tolerance Bolts, Screws and Nuts" GB5267-85 "Threaded Fasteners Electroplating" + GB5779.1-86 "Fasteners Surface Defects-Bolts, Screws and Studs-General Requirements"; GB5779.3-86 "Fasteners Surface Defects-Bolts, Screws and Studs-Special Requirements" GB90-85 "Fasteners Acceptance Inspection, Marking and Packaging", 3 Size
Commodity specifications are specified in the drawings, Tables 1 and 2. Issued by the National Bureau of Standards on January 17, 1986. Implemented on October 1, 1986. 15 ~ 25. The type of concave cavity is selected by the manufacturer. 0 ~ 1\30. X-enlargement. GB5789-86. Angle end. 15 ~ 25. The bearing surface and the fillet should be smoothly connected. The end should be in accordance with the provisions of GB2-85: gm = 1. Smin =! m#×—5P, P pitch. Thread specification. 125-1200. Note: Avoid using the specifications in brackets as much as possible. GB5789—86
GB 5789—86
2022*26wwW.bzxz.Net
Technical conditions
As specified in Table 3.
Mechanical properties
Product grade
Surface treatment
Surface defects
Acceptance and packaging
GB 5789—86
GB 196—81, GB 197—81
8.8 ~12.9
GB 3098.1—82
Stainless steel
A2—70
GB 3098.6—86
GB3103.182
①Oxidation
②Galvanized passivation GB5267—85
GB 5779,1-86, GE 5779.3-86 (only for 12.9 grade GB90-85
Marking example of hexagonal flange bolts with thread specification d=M12, nominal length !=80mm, performance grade 8.8, surface oxidation, type A or B:
Bolt GB5789-86-M12×80
Marking example of octagonal flange bolts with thread specification d=M12, nominal length l=80mm, performance grade 8.8, surface oxidation, type A:
GB.5789-86-AM12×80
Additional notes:
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Institute of the Ministry of Machinery Industry. This standard was drafted by the Standardization Institute of the Ministry of Machinery Industry.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.