Some standard content:
TCS55.150
National Standard of the People's Republic of China
GB/T18456-2001
Packing container
1m3 metal medium bulk box
Packing container 1 m' sleel middle-sized bulk case2001-09 18 Issued
People's Republic of China
[General Administration of Quality Supervision, Inspection and Quarantine
2002-01-01 Implementation
/T18456-2001
Established standard based on the United Nations and domestic dangerous goods transport regulations and the rigid medium-sized container 1 level packaging inspection requirements. The formulation of the contract, in the technical content of the work and the requirements of the effective,
to make my country's 1m3 metal medium-sized plastic packaging box requirements as far as possible with the international field, so as to adapt to international capital, technology and economic license as soon as possible Communication must be in the need of the exhibition:
This standard is proposed by the State Administration of Industry and Information Technology:
This standard is under the jurisdiction of the National Standardization Technical Committee, and the units of the vehicle standard are: the Ministry of Culture and Information Technology Research Institute, the China Chemical Standardization Research Institute, the Ministry of Measurement and Measurement Research Institute, the University of Science and Technology, the First Analysis Energy Manufacturing (Anwang) Co., Ltd., Beijing Mengqi Capital Co., Ltd., and the main individuals of this standard are Jiao Caimen, Hu Changcheng, Li, Zhang Duan, Ling Yuchang, Zhang Yizai, Ma Wujun, Li Fulian Qingshan, Qu Wei, Cao Jianmu. The standard has been issued.
1 Scope
National Standard of the People's Republic of China
Packaging container: 1m3 medium bulk container
Package container 1 m'sleel adildle-slzedbulk eseGE/T 18456—2001
This standard stipulates! The basic technical requirements, test methods, general heat treatment rules, marking, storage and other requirements for medium-sized bulk containers (hereinafter referred to as bulk containers) of gold. This standard applies to the production, circulation, use and supervision of 1 m gold crown medium-sized bulk containers. 2 Referenced standards The texts contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid: All standards will be revised. The parties who use this standard should discuss the possibility of using the latest version of the standard. GR/T3F-20D0 Packaging container barrels GB/T91219B9 Carbon steel and low alloy structural steel specifications GB/T 2X28:057 Batch inspection sampling sequence and sampling table (applicable to continuous inspection) GB/4357.3-1992 Stacking test method for other pieces of packaging containers GB/T 1857.5--1392
Packaging and transportation Packaged product joint drop test force method
3 Symbols and codes
". One cover outer length and width:
Lower bottom outer length and width!
Inner length and width:
F, Lower bottom inner length and width (upper part of the support hole
H, one outer height
H. One inner height:
Self-weight:
V.-Volume:
R Maximum content mass
4 Requirements
4.1 Basic requirements
4.1.1 The structural parameters of the device are shown in Table 1. Approved by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on September 18, 2001, 2002-01-01 Safety
CB/T 18456-·2001
National central release sales
front view
Sa now area
abandoned Xin structure general diagram
[cover length, fill mm
lower test length, research, nr
filled development, mID
lower room length, party.n:n
self-level-kg
customer, n
Italian big chain quality both, kg
GH/T 18456—2001
AA secondary rain use (not pot frost industry)
Figure 1 (light)
1 Container parameter requirements
4.1.2 The connection between the container and the surface can be equipped with a protective flange, and the number of cores
investment limit
4.1.3 The cover and wall panels of the solvent tank are not allowed to be spliced: at most three plates are allowed to be spliced, and the joints are overlapped. The inside and outside of the tank are continuously welded: the flange is made of four plates, and the joints are welded with beveled edges. 4.1.4 The angles of the upper and lower ports of each container are relatively small, and the difference is not large. 4.1.5 The control parameters of the container are not specified.
4.1.6 The edges of the container should be buckled, and the cover should be in line with the rubber box. 41. The side panels of the container have air holes for exhaust, replacement and sampling. , one hole can be easily opened and closed: and can be equipped with a safety valve.
4.1.8 The surface of the through-hole should not be detailed,
4.1.9 The container and the pin body should be connected by a nozzle, 4.2 Selection requirements
Performance requirements Dead table?, bzxZ.net
Bottom lifting Jiang negative
Exhibition department test fee personnel,
Non-code test,
You can test the Wulika
According to the test height.m
Antao gas light k\a
If you ask for installation, please read this micro-test, 4.3 Request
B/T18456-2001
Light 2 Performance Requirements
15 503. 5
22 331. 24
5-- 13
The storage standard is difficult
The permanent deformation that affects the safe transportation, the internal concentration is not lost
Not full
The contents are not lost
VII.3.1 The container code parts should be complete and well-matched, and the interchangeability of the limited parts should be guaranteed. 4.3.2 The outer cover of the set is free of burrs and light machine polishing. 4.3.3 The seams of the container shall be neat and smooth: the welds shall not have burn-through, light, pores and other defects: the outer edges shall be welded by continuous welding, and the inner surface shall be smooth and flat, without ripples, flow and other defects. The ignition resistance of the container shall not be lower than the 2nd level specified in Appendix A of CB/T2252U. 1.3.5 The inner surface shall be clean, without damage, and other materials shall be accepted. 4.4 Materials shall be selected in accordance with GB/T912. 4.4.2 When sealing, the materials shall be selected with good sealing performance, corresponding to the material, energy resistance, durability and similar performance. 4.4.3 The outer surface coating shall be made of materials with strong aging resistance, good convenience and durability, and the inner surface shall be made of materials that are compatible with the interior. 5 Test method
5. The dimensions
can be calibrated with universal measuring tools with a precision of 1.5 mm. 5.? Bottom lifting test
The load of the container is 2-level, and the forklift is selected to be 15 mm deep. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. The forklift is selected to be loaded with force. During the test, apply a breathalyser outside the container, maintain a bearing capacity of 51Di, check whether the chain and each connection are leaking. 5.6 Drop test
First conduct a complete test, with a height of 2 liquid-free, and a full and corner drop alarm: soft, 5.7 Safety pressure test
Connect the safety gauge with a barometer, and pass a gas at the pressure specified in the gauge, check the safety gauge and the pressure when it starts to leak: 5. Daily quality inspection||tt ||St. Addition, port, and passage equipment inspection,
5.9 Differential force test
G door 5-0 Appendix A inspection,
GB/T18456-2001
5.10 Container end side plate, bottom loss, cover, flange material inspection shall be carried out in accordance with CE12
6 Inspection rules
6.1 The quality supervision department of the manufacturer shall inspect the container in accordance with this standard and issue a certificate of conformity. 6.2 Container inspection is divided into factory inspection and type inspection: 6.2.1 Inspection items are inspected daily
6.2.1.1 Each month of production or each time of continuous production or continuous production is a batch of 100. 6.2. 1. 2 G/T2828 regular inspection sampling plan: a! 1.1 and 4.3 of this standard are the inspection items. The inspection level of this special media is about 3. The qualified quality level is 6.5. The correct judgment number is shown in the table:
Table 34.1 and 4.3 Number of samples and qualified judgment number are normal operation Hanzhou Xiang
batch Chengli
60_~-3 200
IL-5-3
will be the average standard
AQL-6 5
will not be the standard
b) The gas rate test number in 4.2 of this standard is the inspection item. Its level is T51, and the quality level is 2.5. The number of samples and qualified judgment number are shown in Table 1. Table 4 Number of samples and qualified judgment number of airtight test Normal operation
batch Hui Fanyuan
6.2.2 Type inspection original date
Sample efficiency
Combined judgment efficiency
6.2.2, .1, 4.2, -3 of this standard are type inspection items, and the number of samples is! The inspection sequence is: take 3 containers and conduct qualification tests on 4.1, 5.2 and 4.3, and then conduct type tests. 6.2.2.2 When the customer's container samples have any of the following conditions, type inspection should be carried out: a) New products and old products are undergoing trial production and identification; b) When the structure, material and process changes may affect the performance of the product; =) Normal production is stopped, and an inspection is carried out once every six months; d1 When resuming production after a long period of suspension: e) The factory inspection results are different from the results of the last type control inspection, and the national quality supervision agency may propose the requirement for type inspection. 6.3 Specifications
63.1 Factory inspection judgment rules
A21. - 2. F
This standard judgment number
When more than four items in 4.1 and 2.3 do not contain the same, the sample is unqualified. When the airtightness test in 4.2 fails, the product is judged to be unqualified. When the number of unqualified samples is greater than or equal to the number of unqualified items specified in Table 3 and Table 4, the batch of products is judged to be unqualified.
6.3.2 Type particle inspection rules
GH/T:18456—2001
6.3.2.1 When more than four items in 4.1 and 4.3 do not contain the same, the sample is judged to be unqualified. If one sample fails, the batch is judged to be unqualified.
5.3.2.2 Follow 4.2 to inspect item by item. If one item of a sample code does not meet the requirements, it will be judged as unqualified. If all items do not meet the requirements, the entire batch will be judged as unqualified.
6.3.3 This qualified batch contains 1 item of the qualified product. If it is submitted for strict inspection again, it will still fail. This batch will be judged as a substandard product.
6.4 The qualified product issued by the container is a holiday. If there is a difference in quality, it has the right to report the items specified in this standard. If the inspection meets the requirements of this standard, it will be a qualified product. The group of products will be used as the delivery number. 7.1 The manufacturer's mark, production date and other information should be marked on the parts before use. 7.2 During transportation and loading and unloading, avoid changing the solvent tank by truck or by adding a cloth. 7.3 During storage, in the case of open-air storage with the presence of gas, cover with a cloth.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.