HG/T 3636-1999 Projection slide dimensions HG/T3636-1999 Standard download decompression password: www.bzxz.net

IC537.040.20
G80,GB1
Chemical Industry Standard of the People's Republic of China
IIG/T 3008~-3010—1999
HG/T3635--3641—1999
Photosensitive Materials and Test Methods
Published on 1999-06-16
Implemented on 2000 06-01
Published by the State Administration of Petroleum and Chemical Industry
Registration No.: 3738—1999
HGI 3636-1999
This standard is formulated based on the national standard 1501755:17 Photographic projection slides - Size>, and is used for the referenced international standard 8 1203 Photographic bite roll and camera back window size 175 Photographic books - British or smaller camera - Size and format) 374 Photographic 110 Specifications - Film back window size and format "Two special standards will not be used as Chinese standards in the future. Therefore, this standard will be used in this international standard directly related to the use of the standard, the size of the mutual dimension as Appendix A <Reminder) Others of this standard. This standard was proposed by the Technical Supervision Department of the former Ministry of Chemical Industry. This standard is owned by the Ministry of Chemical Industry, the Ministry of Optical Materials Science and Technology non-chemical technical point unit! This standard was drafted by: China Lucky Film Company. China Lucky Film Production Group Co., Ltd., Ministry of Chemical Industry Belt Film Factory. This standard is intended for the development of standards by the ISO member bodies. ISO Foreword ISO (International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through technical committees. Each member body interested in a subject has the right to participate in the work of the technical committee. Governmental and non-governmental international organizations may also participate in the work by contacting ISO. International Standards approved by the technical committees are circulated to the member bodies for voting. A minimum of 75% of the required votes must be obtained before they can be published as International Standards. ISO 1755 was prepared by ISO/TC 42 under the guidance of technical committees. This second edition replaces the first edition (ISO 1755, 1979). Other technical revisions have been made. Users should note that all international standards are subject to revision from time to time. Any other international standards cited herein, unless otherwise specified, refer to the latest ones.
1 Scope
Chemical Industry Standard of the People's Republic of China
Projection Slide Dimensions
Projection slides-dimensions1G/T3636—1999
wi3SO1755:1987
This standard sets the original specifications of projection slides in China: e×3m, cm2m×7m and the basic dimensions of its marking tape:
This standard is not applicable to films for special purposes, such as electric projection lamps. The standard is intended to facilitate the use and interchangeability of films with these dimensions to minimize the spread of specifications that do not conform to these dimensions.
Except for the nominal 13X1Vum blue film with a surface area of ​​<110 mm, the technical standard is not applicable to "sub-small film" with a span of +3cm×cm.
2 Referenced standards
The following standards contain provisions that become the current provisions of this standard through reference in this standard. At the time of publication of this standard, the versions shown are valid. All standards will be revised. The party using the wooden standard should discuss the possibility of using the following standards to release the latest version. IS: 233 Photographic technology
ISO :754
ISU7374
3 Definitions
Photography
Photography
This standard uses the following definitions.
3-1 Film slide
Cavity camera
Positioning surface
Camera screen size using 35mrs or less film - 110 specifications
Film and backing paper size and format
Film recovery (must be on the basis of the body) a suitable remote film window and expansion device five meters of assembly 3.2 Slidemount A device that holds the slide carrier and its support, i.e. the protective black and the mask window, together. It can be made of soft adhesive material, such as paper, metal or paper. 3.3 Masking tape A light-proof material that is not transparent to the outside and limits the area of ​​observation or projection. 3.4 Slidemount A device that holds the slide carrier and its support, i.e. the protective black and the mask window, together. It can be made of soft adhesive material, such as paper, metal or paper. 3.5 Masking tape A light-proof material that is not transparent to the outside and limits the area of ​​observation or projection. 3.6 Masking tape A light-proof material that is not transparent to the outside and limits the area of ​​observation or projection. 3.7 Masking tape A light-proof material that is not transparent to the outside and limits the area of ​​observation or projection. 3.8 Masking tape A light-proof material that is not transparent to the outside and limits the area of ​​observation or projection. 3.9 Masking tape A light-proof material that is not transparent to the outside and limits the area of ​​observation or projection. 3.10 Masking tape A light-proof material that is not transparent to the outside and limits the area of ​​observation or projection. 3.11 Masking tape A light-proof material that is not transparent to the outside and limits the area of ​​observation or projection. 3.12 Masking tape A light-proof material that is not transparent to the outside and limits the area of ​​observation or projection. 3.13 Masking tape rir
For identification, a mark shall be added to the slide inside or on the surface of the slide. 4 General requirements
Approved by the State Administration of Petroleum and Chemical Industry on June 16, 1999, and implemented on June 1, 2000#
IIGT36361999
4.1 The size specified in Table 1 is only applicable to slides and does not take into account the type of light used. 4.2 For marking tapes used for ships, they shall include the requirements of 4.3. 4.3 The width of the marking tape shall not exceed 3m! or more. When the slide is viewed directly and the image is correctly positioned and upright, the colored strip on the top of the slide may extend to the edge of the slide, but shall not extend to the back of the slide. There shall be no other light or dark strips on the edge or frame of the slide. Note: Marking The band can only be used as a position indicator, but it does not exclude the use of other position indicators. 5.4
5.1 Overall dimensions
For each nominal size of the slide, there is a projection area, according to the film, the slide rental instructions sometimes use the actual dimensions of the projection display band in Table 1. The radius of the projection frame should not exceed 2.3mm. The radius of the bottom of the slide frame should not exceed 0.3mm. The thickness of each nominal size of the slide should comply with the provisions of Table 1. 5.3 The vertical projection should be close to the vertical, with a maximum difference of ±1. 5.4 Overall surface area
The nominal dimensions of the screen surface of each standard specification of the slide are listed in Table 1. No matter what kind of situation, the light should be located in the center of the film.
3.5 The filter plate dimensions should be in accordance with Table 1: The filter plate should be located in the center of the two horizontal and vertical positions, the distance between the two opposite sides and the adjacent sides of the filter plate should not exceed 0.5m, the secondary angles of the filter plate should be at right angles, the deviation should be within ±1°,
class! Slide size: 3×3 slide. Slide size: n, n0, 0+:
E. x+n, nJ>
n. 9 69.9 -
3.5 volume
n. 16×24
36×54
approximate diameter: 12.0: 15.8=2.1
15.5x#2.510, 5
22-5: 22.5+0.5
22.1x:1.3+u..
29. 5x25.5-0.5
37.5x37-u.
55-5X53.5=0.7
Blue, film body thickness auxiliary lamp,
IG/T36361999
Appendix
(recommendations)wwW.bzxz.Net
Related contents of referenced standards
Chapter 200 cites ISO1203, ISO2754 and ISO7374. They respectively specify the frame size and the required level of each specification of film, and/or the back of the camera and its chemical dimensions. Among them, only the frame size is directly related to the individual standards, so these sizes are listed in Table A for reference by those who make slides. People 1 call the surface size of the standard difficult
501754
stock old grid
g--12r
1F ~ 3n and 2
1- and e
8-123 and 660
123 yuan 220
two-sided nominal size
21×33
60:63
60×9 yuan
35:17374
: new column sales 1SO17 new order IS center/DIS15×7
hundred-sided size ten
6E:9 size small, the model is the Ting size small! , [S6 version has a pad.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.