This standard specifies the requirements, test methods, inspection rules and marking, packaging, transportation and storage of ink absorption testers for paper and paperboard. This standard applies to ink absorption testers for self- or near-self-color, coated or uncoated paper and paperboard for lithographic, gravure and letterpress printing (hereinafter referred to as "ink testers"). The periodic technical status inspection of ink testers during use should also be used as a reference. QB/T 2636-2004 Paper and paperboard ink absorption tester QB/T2636-2004 Standard download decompression password: www.bzxz.net

ICN86.100
Classification number: N72
Equipment number: 143012CC4
Light Industry Standard of the People's Republic of China
QB/T 26362004
Paper and hoard - Iester of ink absorbency2004-08-15Released
National Development and Reform Commission of the People's Republic of China2005-01-01Implemented
QB/T263G—2004
This standard combines GB12911-1991 paper and board - cumulative absorbency test method? The original large transformer, the second test 5 times and other technical contents.
Standard issued by the United Nations Economic and Trade Union
This green standard is a full range of foreign industrial board standard Beijing Technical Committee! 。 This standard mainly starts from: Ka Xiao Zhang test factory. This standard mainly starts from: Liu Yi production.
Technical standard production time release.
YKANTKAA
QB/T 263E 2004
1 Specification
Paper and paperboard ink absorption determination
This standard collects the above-mentioned public collection and acceptance of the determination of the change requirements, recognition and whole method, quality inspection code and you, loading, transportation, letter wood standard use, four services, the use of the door report is not self-color, the economic and prohibition of the end of the paper and paper extremely oil science whole female music development of the following derivative "decision instrument", must be issued by the station with "to the same period of validity inspection bay reference compliance month 2 view normative reference document
The following engraved support in the capital certificate through the standard hundred become small marked clauses. 5 is the third phase Use the support position, its elegant proof of the heart repair release year not sweep the course of the customer or good collection are suitable for people in this standard, but the micro-movement report disassembly should be designed with the standard of the treasure is the example of this car file with the new version. Let the reference text, its most suitable for this group GB: T191-2000 gas installation times the transport multi-indicator G12911! 991 paper oil discharge number - test
GH/133 station 991 sign
light industry machine according to the general magic polyester parts
GB:114253-1993
QB/T IS8x.S-J96
3 Requirements
3.1 Structural type
See Figure 1
Light: Mechanical transfer and technical conditions
One seat: 2 One machine: 3 One shape: 4 One feature: 5 One system: 6.: 7 Micro%. 1: Grid surface diagram 1 Schematic diagram of the structure of the paper and cardboard ink absorption tester 3.2 Two working properties
a Room temperature: 0℃~30:
Relative proof Degree: not more than %:
o! The voltage fluctuation during operation should not exceed 10% of the rated voltage: d! Self-balanced, stable
"Environmental cleanliness, low pressure, head and quality continuity. 3.3 Carrying platform and hood running speed
3.3.1 The platform and the quality body are relatively weak at the same time 3.3.2 The platform reaches the running speed (15.5-1.0) cm/mim. 3.4 Ink coating plate
3. 4. 1 and the degree is 0. 1\mm.
3.4.2 The plate hole area (200.41m.
35 Ink meter ink absorption time control mechanism 3.5.1 "Automatic control ink absorption time is (120 up 5: sQB/T 2636—2304
: Calculate the suction volume 10, when, the oil volume moves, the connection rate and the relative operation of the shape stop, the comprehensive can listen to the next station of the final collection, the thick treasure F fish is adjusted evenly,
3.5.2 For the operation of the sand table, the timing should be determined according to the requirements. 3.6 The ink is uniform 5
The ink source is pulled according to the specified oil lifting female leaf element. The oil hall is the largest oil hall, and the seven samples are left on the table. The uniform and consistent amount of coordination. 3. Note that each time component should be technically determined under multiple periods: the operation of the table should be stable, and there should be no obstruction and ten-year phenomenon:) The paper roll should be chaotic and the market should not be the original. 3.8 The working state of the oil meter
In this operation, a series of operations such as coating, wiping ink, and lifting paper should be convenient, reliable, and accurate. 3.9 Oil type instrument function
The instrument should have independent protection function. When the moving parts reach the limit position, the limit mechanism should be able to operate and stop. 4 Test method
4.1 The test is carried out under the conditions of 3.2:
4.2 Test standard instruments and measuring tools have been certified on T B) scale with a graduation value of 0.1s;
5) micro-scale with a range of 0mm25mm: f scale with a graduation value of 0.01mm; c) scale with a range of 0mm~130mm, and a graduation value of 0.02m: 4.3 Inspection of transmission mechanism
Use seconds and standard cards to measure the displacement of a point on the platform. 1 Calculation formula 1) According to the AI ​​specification in B/129111991 Appendix A. 2x60
Use the machine to reach the average speed, m/mintThe displacement of the whole working point on the machine during the whole time, cm, and the time required for the whole operation, s. The calculated result should be (15.5+1.0)em/minYYY KANT KAa
QB/T2636-2004
4.4 Inspection of the center and dimensions of the ink-coated press plate 4.4.1 Measure the ink-coated press plate at three positions A, C, and D as shown in Figure 2: The average value of each position is collected once, and the arithmetic mean of the measurement is calculated. The accuracy is 0.1mm: 4.4.2 Use a 200mm vernier caliper with a graduation value of 0.02mm to measure the hole size in the layer and calculate the small shape value. The opening area is (20±0.4)cm. eB
4.5 Inspection of absorption time
When the time control switch is placed in the "self-effect" position, the material test piece needs to be used to return to the plastic wheel library, and the test piece is used to wipe out the heart. Use the above stopwatch to record the tear energy from the beginning to the end of the strong fan-shaped swimming test piece. The same time as the stroke of the stroke is used for the control machine to maintain the control pool. The inspection value is (1205). 5 Inspection rules
5.1 Mandatory inspection of ink
The oil accumulation meter E factory standard inspection shall be carried out in accordance with the provisions of GB/T14253-1993. 5.2 Oil type instrument performance qualification standard
The oil type instrument only measures the main performance indicators and all shall meet the requirements of this standard. Ten: subject to: general performance is not allowed to return to the standard:
bucket: non-metering general performance, holding the amount of the lead machine can not be formed into a non-quantity section standard, 5.3 oil alliance instrument packaging before storage bottom reverse shooting sample re-start, law still safety (B/door 142.531993 provisions, starting method milk pull under:) re-inspection depth limit win machine work:
re-inspection qualified judgment number:
according to the sample machine for inflammatory acid batch type 10 %, when the quantity is less than 20 units, the sample furnace should be no less than 3 units, when the batch is 10 units or more, the sample machine should be no less than 2 units:
This standard requires item-by-item inspection. If unqualified products are found in the sample machine, a second expansion and recovery sample should be conducted. The proportion of the sample is 20% of the entire batch (excluding the first sample). If unqualified products appear in the second sampling, the batch should be re-tested.
5.4 Random delivery of oil hall
The oil rate meter is delivered on the day of inspection. The test data of the item should be recorded in the random file. The quality control station is equipped with a quality control file. The product cannot be marked, packaged, transported, purchased, etc.
6.1 Marking
6.1.1 Product marking
QB/T 2E36—2GG2
Product labeling shall be in accordance with GBT1425.3-[993 new regulations: the material can be selected according to the production conditions of the machine. According to the same series and situation, the product labeling shall include: a) product name:
6) product name, product number:
c) product year and shop number,
d) current period and shop number,
6.1.2 Packaging mark
Product packaging should have X-marks, product name
Manufacturer name, address and code
Consignor and receiver mark, year of shipment, numberbzxz.net
Metrology mark CMC:
e! Instrument, handle with care, Su Ling, sunscreen, mountain stomach and symbols.
62 Packaging
6.21 Product appearance should be 1588.5-1996.
6.22 Random documents should be complete, x should be stored accurately: machine components: product description, assembly production, three inspections qualified, product meeting certificate.
6.3 transport and product design and the railway station, water supply and other related sources must be managed, the product requirements:, market planning to achieve new requirements,
64 purchase and storage
stickers should be in the ten plans to adjust the wind, help for the place, and in the stable release, individual requirements for the storage, product efficiency:
YYY KANT KAa
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.