JB/T 9161.6-1999 Internal Grinding Machine Rod D-Type Dimensions
Basic Information
Standard ID:
JB/T 9161.6-1999
Standard Name: Internal Grinding Machine Rod D-Type Dimensions
Chinese Name:
内圆磨床接杆 D 型 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Metal Cutting Machine Tools>>J52 Machine Tool Accessories and Accessories
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9161.6-1999 JB/T 9161.6-1999 Internal Grinding Machine Connector D-Type Dimensions JB/T9161.6-1999 Standard Download Decompression Password: www.bzxz.net
Some standard content:
ICS25.080.01
Standard of the Machinery Industry of the People's Republic of China
JBT 9161.1-9161.10—1999
Aecessories of grinding machinesbZxz.net
Issued on 1999-05-20
National Bureau of Machinery Industry
Implemented on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Internal Grinding Machine Extension Rod
D-Type Dimensions
Extenslon rod of spindle uf iatenal grindertypen-Dimensions
This standard specifies the internal extension rod D-type fast rent dimensions: Reference Standard
[B/T 9161.6—1999
The following standards contain provisions that, through reference in this standard, become the supporting documents of this standard. At the time of publication of this standard: the version shown is the version, all standards are subject to revision, so that this standard can be determined to explore the possibility of using the following new versions. GB, T4127-1997 Shape and size of common end tools 3
Type and size
Single type and size are specified in the following figure and table
a 5S2f
Approved by the State Machinery Industry Bureau on May 20, 1999 and implemented on January 1, 2000
Basic
Marking example:
Pre-report difference
.-0.022
JB/T9161.6-1999
4m, 1-0,! 15mm internal break grinder connecting rod mark: rod D4×10×115JB/19161.61999
welcome to use the machine
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.