GB 3739.2-1983 Compression-type tapered thread right angle fitting
Basic Information
Standard ID:
GB 3739.2-1983
Standard Name: Compression-type tapered thread right angle fitting
Chinese Name:
卡套式锥螺纹直角接头体
Standard category:National Standard (GB)
state:Abolished
Date of Release1983-06-17
Date of Implementation:1984-04-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:21.060.60;
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1984-04-01
other information
Release date:1983-06-17
Review date:2004-10-14
drafter:Hu Lusheng, Liu Dequan, Cheng Zhenshi, Wang Muqin
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:Standardization Institute of the Ministry of Machinery Industry
Proposing unit:Ministry of Machinery Industry of the People's Republic of China
Publishing department:National Bureau of Standards
competent authority:China Machinery Industry Federation
Introduction to standards:
GB 3739.2-1983 Compression sleeve type tapered thread right angle connector body GB3739.2-1983 standard download decompression password: www.bzxz.net
Some standard content:
Marking example:
National Standard of the People's Republic of China
Compression fitting tapered thread right angle fitting
Male elbow-Body
Nominal pressure grade E, pipe outer diameter D, compression fitting tapered thread right angle fitting with 14mm joint E14GB3739.2—83
Published by National Bureau of Standards on June 17, 1983
UDC 621.643.4
GB 3739.2—83bzxZ.net
Implementation on April 1, 1984
01°0+
'I×BTW
SI×91W
Technical conditions shall be in accordance with the provisions of GB3765-83.
Additional Notes
GB3739.283
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry, with participation from Shenyang Heavy Machinery Plant, Chongqing Heavy Automobile Research Institute, Dalian Modular Machine Tool Research Institute, Zhejiang Haiyi County Pipe Fittings Plant, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the 708th Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Wang Muqin.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.