Some standard content:
CB/T17302.1—1998
This standard is formulated in accordance with the grammatical rules and message design guidelines and rules of the UN/EDIFACT standard, and is based on GB/T15311.1:94 "Format of Import Permit of the People's Republic of China" and actual management needs. This standard is used in conjunction with other standards of L:N/EDIFACT, and adopts the segment directory requirements of the UN/E[IFACT.9613 version, the composite data element directory, data element directory, code table and other standards and relevant national standards. The message type code is CNIMLI. This standard was proposed by the Ministry of Foreign Trade and Economic Cooperation. This standard was drafted by the International Trade EDI Service Center, Quota License Affairs Bureau and China Institute of Standardization and Information Classification and Coding of the Ministry of Foreign Trade and Economic Cooperation. The main authors of this standard are Shi Li, Zhan Fudong, Liu Bisong, Chen Changming, Zhang Baozhong, Li Hong and Ke Xiaoling. 1 Scope
National Standard of the People's Republic of China
Import license message of the People's Republie of China 1.1 Scope of application
This standard applies to electronic data exchange for the management and use of import licenses in international trade 1.2 Principles
GB/T 17302. 1—1998
Import licenses are issued by the issuing authority in accordance with regulations and the application of importers. They are used for the management, import declaration and import settlement of import licensed goods.
An import license can be used once or multiple times according to regulations, but not more than two times. Each use must be endorsed and cancelled by the customs. The number of unused import licensed goods can be reduced.:: The import license may include additional information for the statistics of issuing import licenses and customs statistics. An import license may contain endorsements and instructions of the issuing authority. 2 Reference standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. The versions shown at the time of publication of this standard are valid. All standards are subject to revision. Parties using this standard should discuss the use of the following The possibility of the latest version of the standard. (GH/T2659:94 Code for names of countries and regions in the border area (eqVIS0) 3166:1993) GB6512-86 Code for mode of transport
GB/T12406-1996 Code for currency and funds (idlIS04217:1995) GB/T14805--1993 Application-level grammatical rules for electronic data exchange in administration, commerce and transport (icltISO97351988)
GB/T14915--94 Electronic data exchange terms (GB3/T151911997 Standard data element for trade data element catalog (idtTS()7372:1993) Import license format of the People's Republic of China GB/T 15311. 1—94
GB/T15421—94 International Trade Method Code GB/T 15122—94
International Trade Document Code
GB/T 15514—1998
GB/T15634—1995
GB/T 15635—1995
GB/T 159471995
GB/T 16833-—1997
GB/T 16962—1997
GB/T16963-1997
GB/T 17295—1998
Codes for ports and related locations of the People's Republic of China for electronic data interchange in administration, commerce and transport. Composite data element for electronic data interchange in administration, commerce and transport. Guidelines and rules for message design for electronic data interchange in administration, commerce and transport. Code table for electronic data exchange in administration, commerce and transport. Codes for payment methods for international trade
Code specification for international trade contracts
Codes for units of measurement for international trade
United Nations Trade Data Interchange Directory (UNTDID) Approved by the State Administration of Technical Supervision on April 6, 1998, December 0, 1998 1 Implementation
3 Message structure
Bit identifier
Header section
Details section
Total section
Segment group 1
GB/T17302-1—1998
Message header
Message start
Date/time/period
Name and address
Document (document/message information)
Place/location identification
Goods clearance status
Entry text
Monetary amount
Entry text
Section control
Total control
Segment group 2 —
Money amount
Composed of text
Message
Note: "Status\ is mandatory and conditional. 4. Description
Header section
UNH Message format
Number of repetitions
Starts and uniquely identifies the service segment of the message. The type code of this message is \CNIMI.T\. EBGM
Message count
Can be used to uniquely identify the import license number and message function Date/time/expiry
Used to identify the import license issuance date, import license expiration date and import license deletion or cancellation date: the first appearance is the import license issuance date, the second appearance is the import license expiration date, and the third appearance is the import license deletion or cancellation date
NA Name and address
Used to identify the importer consignee flash name code Code and the name of the visa authority. If C082 and non-aggregated r058 are used, the summary section is 5-segment format. GB/T17302.1-1998. I: Document (document)/message directory. Used to identify the documents (receipts) attached to the import license and their document (receipt) numbers. Location/position identification. Identifies the name of the customs declaration port where the importer declares the goods when they are imported and the country of initial shipment to the importing country. No commercial transactions occur in the transit country. The port of entry or place of origin, as well as the region or pool of origin where the goods are produced or manufactured according to the rules of origin, the first time it appears is the customs declaration port, the second time it appears is the exit 1 (region 1, the first time it appears is the country (region) of origin: CST goods customs clearance status
country is used to mark the trade mode, foreign exchange source, commodity route and import commodity code specified in the contract, FTX is used to mark the commodity name encountered,
segment group 01-ILIN-MF4-MOA.FTX||tt ||" is used to identify the specifications, grades, units, quantities, unit prices, total values, and total value discounts of each imported commodity. 1.1V sub-items
are used to identify the consecutive numbers of each imported commodity. MEA measurement
currency is used to identify the quantity unit and value of a commodity for which an import license is applied. MOA currency amount
" is used to identify the goods for which a license is applied, including the unit, total value, and total discount in US dollars. The first appearance is the unit price, the second appearance is the total value, and the third appearance is the total value in US dollars. FTX The following is the text
Used to identify the specifications and grades of a commodity under the import license. UNS Section Control
Use "" to separate the detail section from the summary section.
CNT' Control Total
Used to provide the total number of sub-items of the message control + provided by the sender, so that the receiver can check. Segment group C2-MHA-MUA
Used to identify the total quantity, total amount and total amount in US dollars of the imported goods. MEAiF Mouse
Used to identify the unit of account and total quantity of the imported goods MOA Currency Amount
Used to mark the total currency value of all the commodities under the import license, including the total amount and the total amount in US dollars... The first appearance is the total amount, and the second appearance is the total amount in US dollars, FTY Free Text
Used to identify the remarks made by the visa agency, UNT Message
Conclusion of the message, the number of segments in the message and the control of the message. This special number is used to describe each segment of the standard: list the status, type and length of the data elements in TN/EIFACT and the corresponding relationship with the standard, and make appropriate comments and explanations. Each segment is listed in the order in which it appears in the message. After the segment or segment group mark, there is a mandatory (conditional) indicator, the maximum number of repetitions and the segment description.
GB/T 17302-1--1998
From left to right, the first column is the data element tag and name, and the second column is the status of the data element in EDIFACT (M or (),Type and length. The above information constitutes the original EDIFACT segment format definition. The third and fourth columns are specific information for this standard. The third column is the status indicator for the use of FDIFACT data elements, and the fourth column is the code value used for the specific data element in the description and message. In addition to the code values in 13/T16833-1997, this standard also uses the national standard code and the Ministry of Foreign Trade and Economic Cooperation code. When the national standard code is used, its standard release number is listed in the segment notes. When the code in GB/116833:1997 and the Ministry of Foreign Trade and Economic Cooperation code are used, their specific code values are listed in the fourth column. The mandatory (M) data element in the FDIFACT segment remains unchanged in this standard. The conditional (C) data element in the EDIFACT segment is further agreed upon in three states according to actual business needs in this standard, and can be expressed by abbreviations. They are listed as follows:
Mandatory M indicates that the data element is required and must be sent. The conditional type indicates that the data element is selective and can be sent according to the user's opinion. The unused N indicates that the data element is not used and should be omitted. If a composite data element is marked as N, all its data elements are assigned a blank status indicator. The abbreviations are:
SG; abbreviation of segment group) F: abbreviation table of data element
UNH message header
Function: start, identify and specify the message
Status: M
Number of repetitions:!
EDIFACT
0062 Message reference number
S009 Branch identifier
0065 Message type identifier
0052 Message type version number
0054 Message type publication etc.
0051 Management authority
0057 Authority assigned code
0068 Public access reference
So10 Transmission status
0070 Sequence message transmission number
C an. .35
(0073 First/last sequence message transmission indication
Segment note,
This standard
The unique message reference of the sender, the sequence number of the message in the exchange, it has the same value as DE0062 in UNT, generated by the sender
CNIML1 Import License of the People's Republic of China D
LF0065, 0052.0054 and 0051 indicate that the message is the first edition of the import license message issued in 1998 and managed by the Ministry of Foreign Trade and Economic Cooperation (MFI).
Example:
The import license with message reference number 001, the management agency is the Ministry of Foreign Trade and Economic Cooperation LNH 1 001+CNIMLI:D,!81,MFT'
Economic Cooperation, the message release number is 981, and the version number is DBGM Start of message
GB/T 17302.1—1998
Function: Indicates the message type and function and transmits the identification number. Status: M
Repetition times: 1
EDIFACT
C(X)2 Document (document)/message name
1001 Document (document)/service name, code
1131 Code support qualifier
3055 Code table responsible organization, code type
1000 Document (document)/message name
C106 Document (document) message identification
1004 Document (document)/report number
1056 Version
1060 Revision number
1225 Message function, code type
1343 Response type, code type
Segment notes:
Standard Ya
M an12
911=Import license
License number old issuing authority designated
5=Replace
=Normal
DF1001 document name code adopts GB/T15122--94, and only 911 can be used in this standard. IDE1225 uses different values depending on the purpose of the message. Cancel is used to indicate the deletion of the certificate. Generally, when the company withdraws the certificate, changes the certificate, the management authority announces that the certificate is invalid, or there is an error in the certificate, the deletion of the certificate is adopted: Replace is used to indicate cancellation; the code is empty to indicate that the certificate is no longer issued:
For example:
BGM+D11+97-AA-100169The import license number is 97-A4-100169DM
Date/time/expiration
Function: Indicates the import period and/or the wartime or deadline. Status: M
Number of repetitions, 3
C507 (date/time)/deadline
2005 date/time/deadline limit symbol
2389H date/interval/period
2879 date/time/deadline format limit
Note:
GH/T 17302.1—1998
EDIFACT
C alr... 35
This standard
125-Import license period indicates the date of issuance of the import license
195=Import license expiration date
The following period indicates the period of cancellation or verification
in1-yyurnda
This section is used to mark the issuance period, validity expiration date and cancellation or verification date of the import license [values not exceeding 200 yuan are used to mark different periods of the license respectively. When the message function is normal, the import license issuance date is consistent with the cancellation date of the license. When the message function is to cancel or replace the license issuance date, the cancellation or cancellation date does not matter. DE2379 selects code 101. The import license date is expressed in the unified format of yymmdl, such as:
DTM·125:97C512:101 means the import license issuance date is May 1, 1998 TTM-9:9597:013:101 means the license expiration date is October 13, 1998 TTM-9:970826:101
AA name and address
means the import license cancellation or cancellation date is August 26, 1997 H Table 4
All can: indicate the name/place and its related functions, can be used independently in IC082 and/or unstructured C058 or structured ((180 to 3207.
Status: M
Number of repetitions: 3
EDIFACT
3033 Participation qualifier
(:082 Participation identification details
Standard
IM Jinxin
CN=Consignee
MS-Document/Message Issuer: Sender indicates visa application
8(03: Participant identification
1131 Code table qualifier
3055 Code table responsible agency. Code type
C05% Name and address
3124 Name and address line
3124 Name and address line
3124 Name and address line
3124 Name and address line
S124 Name and address line
(080 Participant name
3036 Participant name
3036 Participant name
3036 Participant name
3036 Participant name
3045 Signature and party name format, code type
C059 Street
3042 Street name 1 House number/Postal code
Public mailbox
3042 Street name and house number/Postal code
Change mailbox
3042 Street name and house number/Postal code
Change mailbox
3042 Road name and house number/Postal code
3164 City name
3229 National administrative division mark
3252 Postal code
3207 Country, code type
Paragraph notes:
GB/T 17302.1—1998
Table 4 (end)
EDTFACT
C an. . 35
t: an..35
C an.. 35
C an.. 35
C an., 33
C an.. 35
IC an..3
This standard
M znl3
Importer code
Consignee code
160=Participant identification company code
, MFT=Ministry of Foreign Trade and Economic Cooperation
Importer name
Consignee name
Certification authority name
This section is used to identify the import license message and the trading parties and certification authorities. When identifying the importer, C082 must be used to identify its code, and C058 may not be used: When identifying the consignee, C08 may not be used 2. When C082 is not used, the name must be marked with unstructured C058; when marking the visa authority, C082 is not used, and the unstructured C058 is used to give its common name, and DE3039 uses the import and export enterprise code.
NAD-IM-+3302144075490:160: The MFT importer is Ningbo Medicinal Textiles Association Import and Export 1 Company, and the British industry representative is 3302144075490
Document (Account)/Message Details
GB/T 17302. 11998
Function: Identify the document (document) printed, electronically transmitted or referenced in accordance with the provisions of the message description, and related to it, the transaction type identification caused by the message.
Status: C
Number of repetitions: 1
LEDIFACT
COO2 Document (document)/Message name
1001 Document (document)/Message name, code can..3 Code type
1131 Code table qualifier
3055 Code table responsible agency. Code type an.: 31000 Document (document)/Message name
C5 03 Document (document)/message group
1004 Document (document)/message number
1373 Document (document)/message status, code, Ca11..3 code type
1366 Document (document)/message source
3453 Language: code type
3153 Communication channel identifier. code type! an,, 31220 Number of required documents (documents)
1218 Number of required original documents (documents) 1CⅡ:: 2 number
segment note:
this standard
966-Quota pre-allocation certificate indicates progress! Approval document
M an.,17 Import approval document number
Import approval document source
This section is used to identify the import approval document number. The import approval document number is the number of the import approval document approved by the relevant management department when applying for an import license.
For example:
IOC-966+3100 97-12356°
The import approval document number is 3100-97-12356LOCLocation/position identification
GB/T 17302. 1—1998
Function: Identify country/location/position/first relevant position/second relevant position. Status: M
Number of repetitions: 3
EDIFACT
3227 Place/location qualifier
C517 Location identifier
3225 Place/location identifier
1131 Code table qualifier
3055 Code table responsible body: Code type
3224 Place/location
C519 First related location identifier
3223 First related place/location identifier
1131 Code table qualifier
3055 Code table responsible organization, code type
3222 First relevant place/location
C553 Second relevant location identifier
3233 Second relevant place/location identifier
1131 Code table qualifier
3055 Code table responsible organization, code type
3232 Second relevant place/location
5479 Relationship. Code type
Segment note:
C an.. 70
C an.. 25
This standard
, 22-Customs clearance place indicates the customs declaration port
135-Exporting country (region)
27-Country (region) of origin
Customs declaration port code, length is an5bZxz.net
Exporting country (region) code, length is an2Origin country (region) code, length is an2This section identifies the customs declaration port or the exporting country (region) or the country (region) of origin of the goods. The customs declaration port code adopts GB/15514-1993, and the country (region) code adopts GB/T2659-1997. Example:
LOC—22+CNXMN, the declaration port is Xiamen
1.OC-35+BR, the destination country (region) is Pakistan, LOC+27--CH'
the country (region) of origin is Switzerland
CST cargo clearance
GB/17302,1—1998
Energy: Use customs marks to indicate the acquisition status and itinerary of the goods. Status: M
Number of repetitions: 1
EDIFACT
119G Goods Item Number
(246 Customs Goods Code (Commodity)
7301 Customs Code Identifier
1131 Code Table Qualifier
3055 Code Table Responsible Agency. Code Type
C24B Customs Goods Movement Code
7361 Customs Code Identifier
1131 Code Table Qualifier
305 Code Table Responsible Agency. Code Type
C24F Customs Goods Code
7351 Haida Code Identifier
_131 Code Table Qualifier
305 Code Table Responsible Agency, Raven Type
C215 Customs Goods Code
73i1 Customs code identification
-13 code table qualifier
3055 code table responsible for the machine, code type
C246 customs goods code
7351 customs code identification
1131 generation table qualifier
3055 code table responsible for the agency, code type
paragraph note:
this standard push
trade mode code
105-customs interim report type wave trade party GB
foreign exchange case source code
bank purchase
2 Foreign investment
3 Loan
4 Donation
5 Claim
6 Free assistance
Labor service
12 Business assistance indicates foreign exchange source
Commodity use code
1 Free use
2 Production
3 Domestic sales
4 Repair
1=Transaction attribute indicates commodity use except
Commodity code
IMan.,10| HS code
122=Commodity
CNC: China Customs Maintenance Code
This code is used to identify the selected trade mode, foreign exchange source, commodity usage and the specific code of imported commodities. The trade mode code is used to identify the trade mode, foreign exchange source, commodity usage and imported commodities. The trade mode code is used in GBT1512141. The length is 8 or 1 digit. 113: The mark and the complex data are used to indicate the trade mode, foreign exchange source, commodity usage or commodity code, such as:
C5T+1-:3:105:GB+1:42:MFT-3:71;MFT -84807100UI:122;CNC item number is 1, trade mode is general trade (general trade code is 10), foreign exchange source is bank purchase (bank purchase code is 1), commodity use is domestic sales (domestic sales code is 6). Import commodity terminal code is 8183710001FTX Free text GB/T 17302.1—1998 Function: Provide self-format or code type text information status, C Repeat number; 1 EDFACT 415 [Text title limited derivative 4453 text function, code type C Text reference number 4441 Free text, code type 1131 Code table limit is symbol 8055 Code table responsible agency.Code type
C108 Therapeutic text
4110 Free text
4440 Free text
4410 Self-generated text
A140 Free text
4440 Self-generated text
3-153 Language, code type
Segment note:
C an.. 70
This standard
AAA=product name
Product name
This paragraph uses "to mark the product name, and the length of the product name shall not exceed 26*2. Example:
FTX-AAA++-rubber'
GOI-LI-LIN-MEA-MOA-FTX
LI sub-item
kinetic energy, marking service item configuration,
status, M
Number of repetitions: 1
1082 Page number
1229 Action request/notification, code type
C212 Item number identification
7140 Item number
7143 Item and type, code type
[131 Code table limit etc.
The name of the imported product is rubber
EDIFACT
.an..3
3055 Code table responsible organization. Code type Ca1.3C829 Sub-item information
6.19 Yuan Sub-item indication, code type
1082 Line top number
1222 Matching back level
7083 Configuration, code type
Temple Note:
This paragraph uses the following to identify the consecutive number of each product. For example:
LIN 3'
Indicates the first product
Indicates the third product
Association standard
The consecutive number of each product
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.