GB/T 5054-1985 Seven-core cables for vehicles and trailers
Basic Information
Standard ID:
GB/T 5054-1985
Standard Name: Seven-core cables for vehicles and trailers
Chinese Name:
汽车与挂车的七芯电缆线
Standard category:National Standard (GB)
state:Abolished
Date of Release1985-03-09
Date of Implementation:1986-02-01
Date of Expiration:2007-08-01
standard classification number
Standard ICS number:Road vehicle engineering>>Road vehicle equipment>>43.040.10 Electrical and electronic equipment
Standard Classification Number:Vehicles>>Automotive Electronics, Electrical Equipment and Instruments>>T36 Electronics, Electrical Equipment
Publication information
publishing house:China Standards Press
other information
Review date:2004-10-14
Drafting unit:Highway Research Institute, Ministry of Transport
Focal point unit:National Automobile Standardization Technical Committee
Publishing department:National Bureau of Standards
competent authority:National Development and Reform Commission
Introduction to standards:
This standard specifies the specifications of seven-core cables for electrical connectors between vehicles and trailers. This standard applies to 12N, 24N, 12S and 24S electrical connectors. GB/T 5054-1985 Seven-core cables for vehicles and trailers GB/T5054-1985 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of ChinabzxZ.net
Seven-core connecting cable of motor vehiclesand towed vehicles
This standard specifies the specifications of seven-core cables used as electrical connectors between motor vehicles and trailers. This standard applies to 12N, 24N, 12S and 24S electrical connectors. This standard is equivalent to the international standard ISO4141--1978 "Road vehicles - seven-core cables". UDC 629.11.013
.5 : 621.315.2
GB 5054—85
ISO 4141-1978
1 The seven-core cable consists of 6 core wires with a cross-sectional area of 1.5mm2 each and 1 common loop core wire with a cross-sectional area of 2.5mm2. 2 The outer sheaths of the seven core wires should have distinctive colors. The colors and corresponding positions are shown in the figure. 3 The outer diameter of the seven-core cable is Φ13.5-2.5mm. Additional Notes:
This standard was proposed by the Ministry of Communications of the People's Republic of China and is under the jurisdiction of the Standardization and Metrology Institute of the Ministry of Communications. This standard was drafted by the Highway Research Institute of the Ministry of Communications. The main drafter of this standard is Wang Lilin.
Published by the National Bureau of Standards on March 9, 1985
Implemented on February 1, 1986
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.