JB/T 9165.4-1998 JB/T 9165.4-1998 Special process equipment design drawings and design file formats JB/T9165.4-1998 Standard download decompression password: www.bzxz.net

ICS25.010
Machinery Industry Standard of the People's Republic of China
JB/T9165.4
Design drawing and documentation formfor special tooling
Published on 1998-11-16
National Bureau of Machinery Industry
Implemented on 1998-12-01
JB/T9165.41998
This standard is an editorial revision of JB/Z187.2~187.5—88, and the main technical content has not changed. Foreword
This is a revision of "Process Document Integrity and Process Document Format". During the revision, only the compilation of this standard replaced JB/Z187.2~187.5—88 from the date of implementation. In this standard, Appendix A of JB/T9165.1 is a prompt appendix; Appendix A and Appendix B of JB/T9165.3 are standard appendices. This standard is proposed and managed by the Mechanical Science Research Institute. The responsible drafting unit of this standard is the Mechanical Science Research Institute, and the main drafters of this standard are Ma Xianzhi, Li Qin, Hu Huiqing, and Shi Junwei. I
1 Scope
Mechanical Industry Standard of the People's Republic of China
Design drawing and documentation form for special tooling
Design drawing and documentation form for special tooling
This standard specifies the design document format for special tooling and its filling rules. This standard is applicable to all machinery manufacturing enterprises. 2 Referenced standards
JB/T9165.41998
Replaces JB/Z187.5-88
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. At the time of publication of this standard, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T14689—1993
Technical drawing format and format
Process document integrity
JB/T9165.1—1998
JB/T9165.3—1998
3Format
Management process document format
This standard specifies the following special tooling design file formats in accordance with the requirements of JB/T9165.1: Special process equipment design task book
Special process equipment assembly drawing title bar, additional bar and code bar Special process equipment parts details bar||t t||Title bar of special process equipment parts drawing
Special process equipment parts list
Instruction manual of special process equipment
Process equipment verification book
4 Filling rules
Format 1
Format 2
Format 3
Format 4www.bzxz.net
Format 5
(The format is the same as Format B3 in Appendix B of JB/T9165.3) Format 6
4.1 Special process equipment design task book (Format 1) should be copied into soft or hard multi-page carbon copy form as needed, and the filling rules are as shown in Table 1. Approved by the State Bureau of Machinery Industry on November 16, 1998 and implemented on December 1, 1998
Space
(1)~(4)
(5)~(6)
（18)
(20）
(21)~(24)
(25)、(26)
JB/T9165.4
Content
Fill in the product model and name of the tooling used according to the design documents and the drawing number and name of the fogging parts respectively. The number of parts using this tool in each product and the production batch Tool number
Tool name
Propose the first manufacturing quantity
Tool complexity level (fill in according to enterprise standards) In which workshop is this tool used
On which equipment is this tool used
, generally only fill in the name of the equipment model. If there are special requirements for the process, fill in the equipment model and the factory equipment number
Which product is this tool also suitable for? Only write the product model and part number process number to indicate that this tool is used in this process Use process content, indicating the content to be processed in this process using the tool. Old tool number
Old tool inventory quantity
Design reason of tool
Process personnel put forward suggestions for the treatment of old tool. Draw a simple process diagram, indicating the positioning reference and clamping method. The person in charge signs and indicates the date
Customize as needed
Fill in the title column, additional column and code column (format 2) of the special process equipment assembly drawing (see Table 2) 4.2
Space number
Tool name||tt ||Fill in content
In fractional form: the numerator is the tooling number, the denominator is the user object. Fill in the material brand (when the tooling has only one fog piece) weight (when the tooling has only one fog piece)
Fill in the proportion of the drawing
Fill in numbers in order
Fill in numbers for the number of drawings of the same tooling number. The name of the workshop using the tooling
Equipment using the tooling
Fill in the company name
Space
(16)~(23)
（24 )~(26）
（28)
(30)~(33)
JB/T9165.4
Change the symbol of the mark
Table 2 (End)
Fill in the content
Fill in the number of the same mark symbol in Arabic numerals. Process document change notice number
Signature of the person who changed
Signature date of the person who changed
Signature and date of each functional person
It is a spare column, which is determined by each enterprise
Description Signature of draftsman
Signature of proofreader
Base drawing number
Define as needed
Fill in the code of special tooling assembly drawing
Fill in the details column of special process equipment fog parts drawing (format 3) (see Table 3) 4.3
Space number
Parts sequence
Tooling fog parts code
Fog parts name
Parts quantity
Material brand
Fill in content
Special process equipment parts drawing title column (format 4) Fill in (see Table 4) 4.4
Space
Tool part name
Tool number
Part code
Material brand of fogging part
Part weight
Number of parts with the same code
Drawing scale
Change marking symbol
Fill in content
Fill in the number of the same marking symbol with Arabic numerals 3
Space
(13)~（16)
(17)~( 20)
(21), (22)
JB/T9165.4
Table 4 (end)
Content
Process document change notification number
Signature of the person making the change
Signature of the person making the change Date
Signatures of each functional person
Reserve column, to be determined by each enterprise
Use Arabic numerals to fill in the total number and sequence number of each part drawing 5 Fill in the special process equipment parts list (format 5) (see Table 5) 4.5
Space
(4), (5)
(7)~(22)
(23)
(24)
Special tool name
Content to be filled in
Fill in as a fraction: the numerator is the tool number, and the denominator is the object of use. Fill in the company name
The total number of pages and sequence numbers of the parts list of the same set of special process equipment. Fill in the "Special process equipment parts list" according to the instructions of (11)~(26) in format 2. Fill in the part sequence number
Tool part code
Part name
Number of parts with the same code
Material brand
Process equipment verification certificate (format Fill in formula 6) (see Table 6) Table 6
Space number
(1)~(4)
(5)~(10)
(14)~（19)
Fill in according to the provisions of the product drawings
Consistent with the contents of the tooling design task book
Fill in content
Fill in the actual accuracy after verification item by item according to the specified verification items or the verification diagram Fill in the repair content and opinions after verification
Fill in the verification conclusion of qualified, basically qualified, unqualified, and scrapped after verification The units and signatures of the verification organizers and participants, and indicate the date 4.7
The format of the design drawings of special process equipment shall be in accordance with the provisions of GB/T14689. 4
JB/T9165.4
QE(OT)
Sea installation worker
Each auxiliary static
(joint project)
(number)
Base map application
(11)(122
Marking place number change file number
(field sample code)
JB/T9165.4 1998
(Special process equipment drawing title bar, additional column and code) 75
Standardization
Use workshop
Use equipment
Format 2
Base drawing number
Binding number
【Continue format 2]】
JB/T9165.41998
(Special process equipment parts drawing Sample details column) 50
[According to the format
Format 3
JB/T9165.4
Base drawing number
Binding number
【According to formula 2】
Number of places Change document number
(14)
Standardization
JB/T9165.41998
(Special process binding Spare parts drawing title bar) (1)
Format 4
Bottom country number
Binding number
(Serial number!
Number of markings
Change file number
Standardization!
《21)
JB/T9165.41998
Special process equipment parts list
Format 5
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.