This standard specifies the rules for the compilation of product models for urban construction and the construction industry. This standard applies to the compilation of product models for urban construction and the construction industry. CJ/T 3035-1995 Rules for the compilation of product models for urban construction and the construction industry CJ/T3035-1995 CJ/T3035-1995 Standard download decompression password: www.bzxz.net

Engineering Construction Standard Full-text Information System
People's Republic of China
Urban Construction
Building Industry
Industry Standard
CJ/T3035—1995
Urban Construction and Building Industry Product Model
Compilation Rules
Rule for model designation of products in urbanconstruction and building industryConstruction Standard
1995-02-05Release
Ministry of Construction of the People's Republic of China
Engineering Construction Standard Full-text Information System
1995-06-01Implementation
Engineering Construction Standard Full-text Information System
People's Republic of China
Urban Construction
Building Industry
Industry Standard
Urban Construction and Building Industry Product Model
Compilation Rules
Rule for model designation of products in urbanconstruction and building industry1 Subject content and scope of application
This standard specifies the rules for the compilation of urban construction and construction industry product models. This standard applies to the compilation of product models in the urban construction and construction industry. 2 Basic provisions
CJ/T3035-1995
2.1 The urban construction and construction industry product model (hereinafter referred to as the product model) consists of four parts: name code, characteristic code, main parameter code and modification serial number, arranged in the order specified in Article 3.1. 2.2 Letters and numbers that can represent the characteristics of the product should be selected as characters in the product model. Note: Each letter, each number, and each symbol is regarded as a character. 2.3 The name code and modification serial number in the product model are expressed in uppercase Latin letters; the characteristic code is expressed in uppercase Latin letters or uppercase Arabic numerals, and the main parameter code is expressed in uppercase Arabic numerals. The Latin letters I, O and X shall not be used in the product model. 2.4 The Latin letters representing the name code and characteristic code in the product model should be the first or second letter of the Chinese phonetic character with the corresponding meaning.
2.5 In the product model, a separator "" should be added between the name code and the characteristic code, and no separator should be added between other components. 2.6 The total number of characters in the product model shall not exceed 16. 3 Product model compilation
3.1 Basic format of product model
Revision serial number
Main parameter code
Characteristic code
Name code
3.2 Name code
3.2.1 The name code shall not be represented by more than three Latin letters. Approved by the Ministry of Construction of the People's Republic of China on February 5, 1995, Engineering Construction Standard Full Text Information System
KAONTKAca-
Implementation on June 1, 1995
Engineering Construction Standard Full Text Information System
3.2.2 The letters of the name code represent the main name, variety, type or the category, group or type to which the product belongs, or only represent part of the elements. Www.bzxZ.net
3.2.3 The name code should be adopted in accordance with the provisions of the current product classification and code standards of each industry. 3.3 Characteristic Code
3.3.1 The characteristic code shall not exceed two Latin letters or Arabic numerals. 3.3.2 The characteristic code represents the material, structure, process or precision of the product, but does not include the characteristics that have been included in the name code. 3.3.3 When a certain characteristic of a product is a number or ordinal number, its characteristic code can be replaced by the Latin letters A, B, C. instead of the Arabic numerals 1, 2, 3.****.
When the characteristic code is directly expressed by Arabic numerals, its position shall not be adjacent to the main parameter code. If necessary, it can be moved before or in the name code.
3.3.4 When the total number of characters in the name code and the characteristic code does not exceed three and there is no confusion, the separator before the characteristic code can be omitted. 3.3.5 If it is not necessary, the characteristic code and its separator may not be listed in the product model. 3.4 Main parameter code
3.4.1 One product can choose one or more main parameters. 3.4.2 When there are two or more main parameters, the main parameters with the same measurement unit are connected by the connector "×", and the main parameters with different measurement units are connected by the connector "_". When there is no confusion, "×" can be omitted. 3.4.3 When determining the value of the main parameter, the legal measurement unit of the People's Republic of China should be used. 3.4.4 The main parameter code can be expressed by the actual value of the main parameter of the product, or by 10 (n=-3, -2, -1, 1, 2, 3) multiples of the main parameter value.
3.4.5 When the number of main parameters is too large, a representative Arabic numeral specified in the product standard may be used to represent a group of main parameters of the product.
3.5 Modification serial number
3.5.1 According to the modification design sequence of the product, the modification serial number is represented by Latin letters A, B, C... in sequence. 3.5.2 The first design product does not have a modification serial number. 4 Additional provisions
For imported products produced in China according to foreign standards, the original product model can be retained. Engineering Construction Standard Full-text Information System
Engineering Construction Standard Full-text Information System
A1 Basic Format Example
Appendix A
Product Model Example
(Reference)
Example 1: The first modified design, the prestressed concrete hollow slab with a standard load of 2.5kN/m2, a span of 3300mm and a width of 600mm, has the model:
2.5-33X 6
First modified design
Standard load
Prestressed
Type-hollow
Variety-floor
Main name-slab
In this example, according to the provisions of 3.4.4, the main parameters span and width are expressed as 102 of their values. A2 Examples of unlisted partial codes or elements
(Remodel serial number)
(Main parameter code)
(Characteristic code)
(Name code)
Example 2: The first design of a carbon steel adjustable weir gate with a width of 4000mm and an adjustment range of 1000mm, its model is: TG
Adjustment range
Type-Adjustable
Main name-Weir gate
(Main parameter code)
(Characteristic code)
(Name code)
In this example, according to the provisions of 3.2.2, the "variety" element in the name code is not listed; according to the provisions of 3.5.2 Fixed, no modification number; according to the provisions of 3.4.4, the main parameter width and adjustment range are expressed as 10-3. Example 3 The second modification design, the top slewing self-erecting tower crane with a lifting moment of 80t·m at the arm end, its model is: O
Second modification design
Lifting moment
Type (type) - top slewing self-erecting type)
Variety (group) - tower type
Main name (category) - crane
Engineering Construction Standard Full Text Information System
KAONTKAca-
(Modification number)
(Main parameter code)
(Name code)
Engineering Construction Standard Full Text Information System
In this example, the characteristic code is not listed according to the provisions of 3.3.5. A3 Examples of omitting or replacing some characters
Example 4: A combined vibratory roller with a maximum working mass of 8t, which is the model of the third modified design
Maximum working mass
Type (type) - combined
Main name (group) - roller
In this example, the separator before the characteristic code is omitted according to the provisions of 3.3.4. (Renovation serial number)
(Main parameter code)
(Characteristic code)
(Name code)
Example 5: The fourth modified design The design adopts 60 series profiles, the opening specifications are 1500mm wide and 1800mm high, and the wind pressure resistance level is 3. The single-layer glass with yarn casement plastic window is model: SPSA
60×1518-3D
Fourth modified design
Wind pressure resistance level
Opening specifications
Profile series
Single-layer glass
Type 1
Variety 1 Plastic
Main name 1 window
(Renovation serial number)
(Main parameter code)
(Characteristic code)
(Name code)
In this example, according to 3.3.3, the product characteristic "single-layer glass" is replaced by "A" instead of the number 1; according to the provisions of 3.4.2, the connector "" between the main parameters of the opening specifications is omitted.
Additional Notes:
This standard is proposed and managed by the Standard and Quota Research Institute of the Ministry of Construction of the People's Republic of China. This standard was drafted by the Urban Construction Research Institute of the Ministry of Construction, Beijing Construction Machinery Comprehensive Research Institute, and China Building Standard Design Institute. The main drafters of this standard are Huang Mingming, Lv Shijian, Luo Shijun, and Wang Changben. Engineering Construction Standard Full-text Information System
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.