GB/T 2885.6-1981 Basic parameters and dimensions of metal ore material vehicles
Basic Information
Standard ID:
GB/T 2885.6-1981
Standard Name: Basic parameters and dimensions of metal ore material vehicles
Chinese Name:
金属矿材料车 基本参数及尺寸
Standard category:National Standard (GB)
state:Abolished
Date of Release1981-01-02
Date of Implementation:1982-07-01
Date of Expiration:2009-02-01
standard classification number
Standard ICS number:Mining and Mineral Products >> 73.100 Mining Equipment
Standard Classification Number:Railway>>Railway Vehicles>>S56 Narrow Gauge Industrial and Mining Railway Vehicles
Publication information
publishing house:China Standards Press
Publication date:1982-07-01
other information
Release date:1981-12-31
Review date:2004-10-14
Drafting unit:Beijing Nonferrous Metallurgy Design and Research Institute
Focal point unit:National Technical Committee for Standardization of Mining Machinery
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 2885.6-1981 Basic parameters and dimensions of metal ore material vehicles GB/T2885.6-1981 standard download decompression password: www.bzxz.net
Some standard content:
The basic parameters and dimensions of metal ore material vehicles of the People's Republic of China
National Standard
Basic parameters and dimensions of metal ore material vehicles
GB2885.6—
This standard applies to underground metal mines or other mines, and transports support materials and other materials along underground tunnels and surface industrial sites.
The basic parameters and dimensions of metal ore material vehicles shall comply with the provisions of the table. Note: This figure only shows the dimension symbols.
State Administration of Nonferrous Metals Industry
Implemented on July 1, 1982
Drafted by Beijing Nonferrous Metallurgical Design and Research Institute
YLC1-6
YLC1-7
YLC3-6
YLC3-7
YLC3-9bZxz.net
Load
Load
GB2885.681
Overall dimensions
Note: ①Height H and traction height h are measured from the rail surface (when empty). ②The maximum load is the load allowed by the strength of the mine car. Width
Traction height
iiKAoNiKAca
Total 3 pages Page 2
Traction force
(not too
Total 3 pages Page 3
2. The model of the metal ore material car is stipulated as follows: GB2885.6
Marking example:
Load capacity 1t, track gauge 762mm Metal ore material car: YLC1-7 material car GB2885.6-—81
Track gauge code: 6 means 600mm
7 means 762mm
9 means 900mm
Load code (.t)
Mine car code
Material car code
Metal ore code
-YYKAONKA ca
People's Republic of China
National Standard
Basic parameters and dimensions of metal mine cars
GB2885.1~2885.6—81
Published by Technical Standards Press
(Beijing Fuwai Sanlihe)
Printed by the printing workshop of Technical Standards Press
Sold by Xinhua Bookstores in various places
Published by Xinhua Bookstore Beijing Distribution Office
2 Number of words 29.000
Format 880×12301/16 Printing sheet 1%
First edition in June 1982 First printing in June 1982 Printing run 1--4,000
Book number: 15169·1-1249
New Science and Technology Books
31—149
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.