This standard specifies the method for compiling the models of motorcycles and mopeds. This standard applies to motorcycles and mopeds specified in GB 5359.1. GB/T 5375-1998 Method for compiling the models of motorcycles and mopeds GB/T5375-1998 Standard download decompression password: www.bzxz.net

1Cs 43.140
National Standard of the People's Republic of China
GB/T53751998
Code of designation for motercycles and mopeds1998-05-06 Issued
State Administration of Quality and Technical Supervision
1999-01-01 Implementation
CE/T5375—1998
This standard is a revision of the model compilation method of motorcycles in GB5375—854. In order to improve the management of the model compilation method of motorcycles in my country and meet the needs of new product development, the main contents of this standard are as follows: 1. Added the determination of the nominal displacement series of motorcycle engines; 2. Added the models of scooters and motorized vehicles; 3. Added the models of light motorcycles;
4. Cancelled the definition of basic model and modified model, and replaced the naming and model abbreviation method of motorcycles in CB4732—84 in the standard. The original standard was issued by the Machinery Industry of the People's Republic of China, and this standard is under the jurisdiction of the National Technical Committee for Automobile Standardization. The second standard was drafted by the Shanghai Motorcycle Research Institute. The drafters of this standard are Chen Zhihua, Yue Lina, Bei Shengqiao, Luo Miquan, 1. Code of designation for motorcycles aad mapeds
National Standard of the People's Republic of China
Code of designation for motorcycles aad mapeds This standard specifies the model compilation and treatment of motorcycles and mopeds. 3. The standard applies to the motorcycles and mopeds specified in GF5359.1. 2. References
CB/I5375—1998
Generation 472-54
GE 5375-- X5
The texts contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the latest versions are valid. When the existing standard is revised, the parties using this standard should explore the possibility of using the following standards as the latest version. GB/T5359.1—1SS6 Terminology of Motorcycles and Mopeds Vehicle Type 3 Definitions
2 The standard adopts the following definitions.
3.1 Model of Motorcycles and Mopeds
A number consisting of alphabetic letters, Latin letters and Arabic numerals is given to a vehicle in order to identify the vehicle. 3.2 Enterprise or Trademark) Code
A code indicating the name of the enterprise (or business tax). 3.3 Specification Code
A code indicating the nominal arrangement of the vehicle
3.4 ​​Type Code
A code indicating the classification of the vehicle
3.5 Design Serial Number
Indicates the designation of the vehicle when the enterprise (or trademark) code, specification code and type code are the same. 3.6 Enterprise Self-determined Number
Indicates the serial number of vehicle improvements and the code that needs to be distinguished for the characteristics and series of the vehicle. 4 Model compilation method
The model code of high-speed motorcycles and light-duty motorcycles consists of enterprise (or trademark) code, specification code, class code, design serial number and enterprise customized code. Its structure or form is shown in Figure 1.
4.1 Enterprise (prefix) code
It is represented by two (or one) capital letters of the enterprise (or trademark) name. 4.2 Standard code
It is represented by the actual displacement of the motorcycle engine, and the unit is liters (liters). The nominal energy of the motorcycle engine is determined by the nominal displacement of the motorcycle engine according to the regulations in Table 1. The theoretical displacement is between the two corresponding nominal displacements, and one of the nominal displacements can be selected: the vehicle must be approved by the State Administration of Quality and Technical Supervision in 1993-D5-D6 and implemented on January 1, 1999
GE/T 5375— 1998
The larger of the two nominal displacements, the nominal displacement of the dual-purpose vehicle is rounded according to the insurance displacement, the enterprise determines the party number
section accounting number
one capital code
regular code
enterprise: business code
Figure 1 number structure
Table 1 engine displacement series
4.3 type code
>1 200
The type code and model code of motorcycles and light motorcycles are composed of the type code and model code. The type code and model code are represented by the first letter of the capital letter of the representative model in the type list and the vehicle name respectively. The 1 in the type code of two-wheeled vehicles and the P in the model code are omitted. The vehicle type codes specified in GB5359.1 are shown in Table 2. This table specifies the model codes of two-wheeled vehicles, special-purpose three-wheeled vehicles and special-purpose three-wheeled vehicles. The type code is determined by the enterprise according to the tax return, and a representative one is selected. The first letter of the Chinese character "诺" in pinyin indicates the model code, and then the type code is added in front. When the vehicle type exceeds the range of the following table, it can also be determined according to the principles specified above, but it must not be repeated with the type code in the following table. Table 2 Type Code Table
Chang Tow Car
Work Number Country
(Omitted
Jie Di Car
Off-board Car
Highway Noye Car
Site Ticket Year
Public Land Recruitment Car
Pulling Small Curtain Year
Transfer CarwwW.bzxz.Net
P (number scale)
(Customized)
Type of personnel
(Compensation)
Motorcycle
Three-wheeled
Tractor
One-wheeled light vehicle
Sweeper
Three-wheeled
Light-duty trailer
GB/T5375—1998
Table 2 (Complete)
General vehicle
Special three-wheeled
Two-wheeled
Special wheel
Replacement
Mushroom vehicle
Machine-driven dual-purpose vehicle
General two-stroke
Special three-purpose light
*Indicates the model code, which is determined according to 4.3, 4.4 Design sequence
P(shortcut)
《\ is）
P(omitted)
(customized)
Type question mark
Use the numbers 1.2.3. to indicate the design sequence of the product in sequence. When the design sequence number is 1, it should be omitted. The design sequence number should be separated from the previous type code by the symbol "\". 4.5 Enterprise self-defined code
Enterprises can use uppercase Chinese pinyin letters or Latin letters to indicate the number according to their needs, and the number of digits can be determined by themselves. 5Examples of nominal displacement regulations
Example 1: Jiadu JH70, theoretical displacement 71.8mL, nominal displacement 70m1. Example 2: Linhai LH90, theoretical displacement 82.4mL: nominal displacement allowed is Wml. Example 3: Bitou JS35QJ dual-purpose vehicle, theoretical displacement 35.01ml., nominal displacement 35mL. 6Examples of model compilation
Example 1: Xingfu brand, nominal displacement 250mL, first design of two-wheeled ordinary vehicle, XF2.0
2: Rate loss case brand, nominal displacement 250mL, second design of two-wheeled off-road vehicle, XF250YS-2
Example 3: Changjiang brand, nominal displacement 750mL, first design of three-wheeled ordinary vehicle. CJ7GE!
Example 1: Changjiang brand, nominal displacement 750m, second design of Judaozheng three-wheel passenger car, CJ750ZK-2
GBT5375—1998
Example 5: Ratefuku two standards. Nominal sweeping volume 25m1: Second release transfer and one-wheel cleaning garage trailer XF
Example i: Nanfang brand, nominal holding volume 50mL, first design of two-wheel light garage trailer Example 7: Mingxing brand, nominal displacement 1L, second design, a two-wheeled light motorcycle, MX50Q-2. Example 8: Lufei brand, nominal displacement 50L, third design, a three-wheeled light motorcycle for people with disabilities, JI.5cQ22-3. Example 9: Nanfang brand, nominal displacement 125mI, second design, fourth improved two-wheeled ordinary lift motorcycle, NF125 $D
Example: The trademark is from the company, the nominal volume is 0m. The second design product is a light and convenient whole-board trailer, HL5QT
Example: The trademark is from the company, the nominal volume is 35ml, the first design of a two-purpose vehicle is IS5QT
Note: 1) These vehicle codes are set by the enterprise, 2C is the code for the original vehicle, 3.D is set by the enterprise for the second modification.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.