title>Dangerous goods - Test method for burning rate of flammable solids - GB/T 21618-2008 - Chinese standardNet - bzxz.net
Home > GB > Dangerous goods - Test method for burning rate of flammable solids
Dangerous goods - Test method for burning rate of flammable solids

Basic Information

Standard ID: GB/T 21618-2008

Standard Name:Dangerous goods - Test method for burning rate of flammable solids

Chinese Name: 危险品 易燃固体燃烧速率试验方法

Standard category:National Standard (GB)

state:in force

Date of Release2008-04-01

Date of Implementation:2008-09-01

standard classification number

Standard ICS number:Environmental protection, health care and safety >> 13.300 Dangerous goods protection

Standard Classification Number:Comprehensive>>Marking, packaging, transportation, storage>>A80 Marking, packaging, transportation, storage Comprehensive

associated standards

Procurement status:NEQ ST/SG/AC.10.11

Publication information

publishing house:China Standards Press

ISBN:155066·1-31494

Plan number:20068243-T-469

Publication date:2008-08-01

other information

Release date:2008-04-01

drafter:Xu Yan, Wang Xiaobing, Mei Jian, Guo Yi, Yang Dongfang, Tang Shutian, Liu Guochuan

Drafting unit:Jiangsu Inspection and Quarantine Bureau, Sinochem Chemical Standardization Institute, etc.

Focal point unit:National Technical Committee on Hazardous Chemicals Management Standardization

Proposing unit:National Technical Committee on Hazardous Chemicals Management Standardization

Publishing department:General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of China

competent authority:National Standardization Administration

Introduction to standards:

This standard specifies the instruments and equipment, operating procedures and results of the burning rate test of dangerous flammable solids. This standard is applicable to the determination of the burning rate of dangerous granular, pasty or powdery substances. GB/T 21618-2008 Dangerous flammable solid burning rate test method GB/T21618-2008 Standard download decompression password: www.bzxz.net
This standard specifies the instruments and equipment, operating procedures and results of the burning rate test of dangerous flammable solids. This standard is applicable to the determination of the burning rate of dangerous granular, pasty or powdery substances.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods: Manual of Tests and Criteria" (4th revised edition), and its consistency is non-equivalent. The relevant technical content of this standard is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251).
The responsible drafting unit of this standard: Jiangsu Entry-Exit Inspection and Quarantine Bureau.
Participating drafting units of this standard: Sinochem Standardization Research Institute, Beijing Entry-Exit Inspection and Quarantine Bureau.
Main drafters of this standard: Xu Yan, Wang Xiaobing, Mei Jian, Guo Yi, Yang Dongfang, Tang Shutian, Liu Guochuan.
This standard is formulated for the first time.

The clauses in the following documents become the clauses of this standard through reference in this standard. For any dated referenced document, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties to the agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For any undated referenced document, the latest version shall apply to this standard.
GB6944-2005 Classification and product name numbering of dangerous goods
GB/T15098 Principles for classification of dangerous goods transport packaging

Some standard content:

National Standard for the People's Republic of China
C/216182008
Dangerous Goods
Test Method for Combustion Rate of Flammable Solids
Dangrrous gors--Test method for burning rate of flammable solids2008-04-01Release
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of China
2008-09-01Implementation
G/121818--2008
This standard is about the construction of the most important thing for the transportation of hazardous goods. It is about the revision of the scientific and technological knowledge. Every real teaching process is very effective. This standard has the technical content that can be found on this standard format! T2 has been revised
This standard is jointly provided by the National Ceramic Hazardous Chemical Testing and Management Association 5 Center T21. This standard is for the transportation of hazardous products. The standard is for the inspection and quarantine of hazardous products. The standard is for the determination of the burning rate of flammable solids by Xu, Dian Xiaoxing, Teng Jian, Guo Xin, Mi Dongxu Shujian and Liu Guochuan. This standard is for the testing method of burning rate of flammable solids by bacteria. 8/US 21615----2008
This standard is for the testing of burning rate of flammable solids by bacteria. The standard is for the determination of the burning rate of flammable solids by Xu, Dian Xiaoxing, Teng Jian, Guo Xin, Mi Dongxu Shujian and Liu Guochuan. This standard is for the testing method of burning rate of flammable solids by bacteria. 8/US 21615----2008
This standard is for the testing of burning rate of flammable solids by bacteria. The standard is for the determination of the burning rate of flammable solids by Xu, Dian Xiaoxing, Teng Jian, Guo Xin, Mi Dongxu Shujian and Liu Guochuan. Application documents
The clauses in the following documents shall become the applicable clauses of this standard. All the applicable documents shall be accompanied by all amendments (not including new editions) of the standard. The parties concerned shall reach an agreement on the date of the new application of this standard. The use of these documents is limited to the latest version of this standard. GB501--2007
111398 Test data
3-3-4-5-6-1bzxZ.net
Specifications for solid materials Explosion
Only the device and the equipment
4.Rui system# management meal n dissection
42 model air spray warm Bo the maximum humidity is
4.3 vibration ruler the maximum moment of photography 1mm.
4.4 seconds liquid, refined:
4.S test board.
, otherwise
photographing steps
5.1 sample tour preparation
teaching before obtaining the object loose teaching idea installation person technology idea: naturally let the model really from mn separation place connection fall in the border table wine 5.1. will close the industry form||tt || times, and then before the test plate and the base of the test board as the flag of the wind, put the equipment close to the fine model, wear the fine model of the total of 5.1.2 items suspected of selling on the multi-toxic, make the growth of 250-dimensional home kidney surface 100Tm. Liu most sensitive to the tide, the material from its content after the health of the health study 5.1.3 take the test photos of the object in the smoke exhaust twist in the appropriate wind, the results should be sent to the end of the test period, and in the test read the same brand unchanged, in the equipment through the monitoring treasure ticket
5.1.4 for the remaining powder outside the home, the measurement time and travel 10% mm length of the teaching 30 magnetic to 403m whole dimension replaced on the period 1 ml of the moistening solution dripping in the batch of the wet swim solution to ensure the deepest moisture through the full-dense moistening, the liquid does not flow on the battlements, the color is happy, the small, the home from the swim side flow, for many membranes, water will fade from the city side, so to add the source of moistening: the total amount of active substances in the moist swim liquid should not exceed 1, this kind of connection ship in the male elephant class 3m 6m of the day. 5, 2 Yan
5.2.1 Use the model gas (fire at the lowest temperature of #1000C to ignite the training protection , when the cotton burns 533m more true, the burning speed is measured with a layer of 1m. For materials other than gold-rich materials, the test is carried out in accordance with the medical knowledge of the 5.2.2 test. All materials are sealed with 1 pure source, and no other materials are observed. 21618--2008
Pharmaceutical packaging instructions
6. Powder fast, granular materials such as the test in the test once or multiple combustion is not effective or the combustion rate is large and small m is classified as G-200 in the risk period 4.1. All metal alloys such as burning, the value of the silver should be within the system of the cost of the system as 4.0 in the energy consumption of the 4.1 period 6.2 easy to burn (except for gold powder), such as the burning time of the flame through the condensed period of the skin wealth 1 class packaging. I will do I have gold powder wood, the area will be more than the test length, the more flammable the gold powder is, the more it will burn, the smaller the shrinkage is, the more gold or metal alloy will end, if the love section is in the big ten n but less than the inner title extends to the test length, the test girl Sichuan type color decoration
production, super decoration type incubation price text cumulative r1509.
08:T 21618-2008
Dangerous goods
Chinese Institute
National Long
Jia Ran Circular Combustion Test Method
GB.T 2S. 23
Dance Tour Language Design Intelligent Equipment
North Aijiamen Haiyou#
Micro-reduction Micro:101:
e: wesw, st. et, en
Tel: 559333198853748
China#Photography can be the most social whole point! Can be made!
Trade training new learning skills store road management
Shucha 830# word count
20 work month limit wear autumn moist
Price number: 85061149810
If there is any installation error, our company's distribution center will replace the service right and will investigate
Inquiry phone: 1610368533533
8002--81912 1/10
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.