GB/T 3762-1983 Sharp-angle sealing gaskets for ferrule-type pipe joints
Basic Information
Standard ID:
GB/T 3762-1983
Standard Name: Sharp-angle sealing gaskets for ferrule-type pipe joints
Chinese Name:
卡套式管接头用尖角密封垫圈
Standard category:National Standard (GB)
state:in force
Date of Release1983-06-17
Date of Implementation:1984-04-01
standard classification number
Standard ICS number:Mechanical systems and general parts>>Fasteners>>21.060.60 Rings, sleeves, pipe joints, sockets
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
associated standards
Publication information
other information
Release date:1983-06-17
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
This standard is only applicable to ferrule type hinged pipe joints. GB/T 3762-1983 Sharp-angle sealing gaskets for ferrule type pipe joints GB/T3762-1983 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Bite type tube fittings--tipplng washer This standard is only applicable to the ferrule type hinged tube fittings. 30
Marking example:
Angle sealing washer with a nominal diameter D of 14mm: Washer 14GB3762-83
Nominal diameter
Note: The weight is a calculated value, and the specific gravity is 7.B5kg/dm. Issued by the State Bureau of Standards on June 17, 1983
UDC 621.643.4Www.bzxZ.net
: 621.882/ .887
GB3762—B3
Others subject to
Applicable thread size
M10×1
M12×1.5
M16×1.5
M22×1.5
M27×2
M33×2
(kg/100 pieces）
Implemented on April 1, 1984
Technical conditions shall be in accordance with the provisions of GB375-83.
GB3762-83
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery Plant, Chongqing Heavy Automobile Research Institute, Dalian Modular Machine Tool Research Institute, Haiyan County Pipe Fittings, Zhejiang Province, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Branch Information Institute, and the 7C8th Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Wang Muqin.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.