JB/T 2001.41-1999 Water system overflow valve (PN=0.4, 0.8, 1.2MPa)
standard classification number
Standard ICS number:Fluid systems and general parts >> 23.100 Fluid power systems
Standard Classification Number:Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
Publication information
other information
Focal point unit:Metallurgical Equipment Standardization Technical Committee
Introduction to standards:
JB/T 2001.41-1999 JB/T 2001.41-1999 Water system overflow valve (PN = 0.4, 0.8, 1.2MPa) JB/T2001.41-1999 Standard download decompression password: www.bzxz.net
Some standard content:
IC.s$ 23.110
Standard of the Machinery Industry of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
Standard of the Machinery Industry of the People's Republic of China
Water system--Relief valve
(PN=).4, 0.8, 1.2 MPa
B72001.41-1999
2014—21
This standard specifies the test and size modification technical requirements for the nominal pressure of 0.4, 0.8, 1.2MPa. This standard applies to the flow room for the lower filling system. 2 Types and sizes
Types and sizes are in accordance with 1. Table 1 provisions
3 Technical requirements
3.1 Nominal pressure 0.4MPa (only with air flow) Test pressure 0.6MPa 0.8Mpa (only with external pressure drop). Test pressure is 1.2MPa: nominal pressure 12Mpa (inside and outside pressure drop), test pressure 18MPa3.2 Under the test pressure, the sealing performance and strength test of the valve mouth and seal are carried out. The test body should be consistent with 1 liquid, and the test pressure should be 1min. There should be no leakage and drop of pressure at the valve mouth: keep the pressure 30mm, shall not be filled. 3.3 The inner and outer springs of the chain are not allowed to be bent. 4 Marking example
Chain flow of nominal diameter 125mm:
Overflow state 125JBT200:.411999
Approved by the State Machinery Industry Bureau on June 28, 1999, implemented on January 11, 2000
FB/T2001.41—1999
[Insurance: 2--Blast mother: 3-Flavor: 4-Green year: 5-Seat: 6 Stud: 7-Scratching parts: Www.bzxZ.net
dx1x,hhAx
B;T 2001.41 j125 240150210280|28G 9× 23 4× 2128 3n5n477175170|106801761 .1u22× 356ni/r 20u1 41.:50
18/T 2001.413:75
-12 × 1.31 × 283m
295200265335
t 21! 414200 3552503204939512× 254× 43:32o
222111244
52151373
85641225
21 ×627( ×5102:
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.