JB/T 8770.1-1998 This standard specifies the requirements and inspection methods for the geometric accuracy and working accuracy of sheet metal edge planing machines. This standard is applicable to general-purpose ordinary precision sheet metal edge planing machines with a maximum cutting length of 6000~16000mm. JB/T 8770.1-1998 Precision inspection of sheet metal edge planing machines JB/T8770.1-1998 Standard download decompression password: www.bzxz.net

The Machinery Industry Standard of the People's Republic of China
JB/T 8770.1
：1998
Sheet metal edge planing machine
1998-07-17 Issued
Precision inspection
1998-12-U1 Implementation
National Machinery Industry Standard
JR/T877U.1.-I998
Sheet metal edge planing machine Precision inspection The standard is formulated based on the requirements of the user and the specific conditions of the existing domestic production sites. This standard is divided into the following two parts under the general title of sheet metal edge planing machine: Part 1 (i.e. JB/TR770.1): Precision inspection! Part 2 (i.e. JB/TB770.2): Technical conditions This standard is proposed by the National Technical Committee for Standardization of Sheet Metal Edge Planing Machines. This standard is under the jurisdiction of Han Heavy Machine Tool Institute. The drafting individuals of this standard are Chaobei Shayang Machinery Institute, Jiaonan Second Machinery Institute, and the main drafters of this standard are Yang Wuyao, An Yanan, and Fan Gu.
Machinery Industry Standard of the People's Republic of China
Precision Inspection of Plate Edge Planers
This standard stipulates the requirements and inspection methods for the geometric accuracy and working precision of plate edges, JR/T8770.1—1998
This standard is applicable to ordinary precision extreme plate edge planer machines with a length of 5000~1600cmm. 2 Referenced standardswwW.bzxz.Net
The following standards contain common provisions, which become the system of this standard through reference in other standards. The version shown at the time of publication of this standard is the effective date: All standards will be revised from time to time. Parties that stop using this standard should consider the availability of the latest version of the following standards. B267-2 Jincheng official machine tool precision inspection wheel pass bar || tt || 3 General requirements || tt || 3.1 Cutting resistance TE2679-82 3.1 Adjust the installation water? , Put some small instruments in the longitudinal and transverse directions at both ends of the bed guide rails. Not only the longitudinal and transverse readings are not effective, but also the 5/1HU:32 inspection time-stock can be connected to the inspection work and the inspection force is injured. The actual order of the whole will be: 3.3 When the actual length is different from the length specified in this standard, the tolerance should be multiplied by the maximum length measured by the provisions of 2.3.1.1 of F260-82. When the result is less than p.o1mn, press o.cmm! 4 According to the agreement between production and manufacturing, the inspection items can be increased or decreased after reporting. Approved by the State Machinery Industry Bureau on 199807-17
199812-01
881251212
+'3'['*'s+1-1'z
'b''t''s
Lang Xian Special
its box)
00021-~0009
JB/T 8770.1-1998
1B/T8770.1:1998
Constant noise
Medical Output
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.