JB/T 8551-1997 This standard is a revision of ZB J84 003-87, ZB J84 004-87, ZB J48 001-87 and ZB J48 002-87. This standard applies to rock drills, explosion-proof electric rock drills for mining, pneumatic picks, pneumatic shovels, pneumatic tamping machines, pneumatic riveters, pneumatic drills, pneumatic grinders, impact pneumatic wrenches, pneumatic screwdrivers, pneumatic grinders, pneumatic strapping and tensioning machines and pneumatic motors in rock drilling machinery and pneumatic tools. JB 8551-1997 Noise Limits for Rock Drilling Machinery and Pneumatic Tools JB8551-1997 Standard Download Decompression Password: www.bzxz.net

The Machinery Industry Standard of the People's Republic of China
JH 8551-1997
Noise Limits for Rock Drilling Machinery and Pneumatic Machinery
Published on April 15, 1997
The Ministry of Machinery Industry of the People's Republic of China
Implemented on January 1, 1998
JB8551-1997
Corrected 10087CC187B480187J48287, corrected 10087CC187B480187J48287, added 14 minor items, and made the noise limits of 17 series of existing products consistent with their corresponding product standards. At the same time, the three standards were combined into one standard to facilitate the implementation of the three standards, and the name of the standard was coordinated with the name of the relevant standards of this profession.
This standard is proposed and organized by the National Mechanical and Pneumatic Industry Standardization Technical Committee: 1. The drafting unit of this standard is Tianshui Mechanical and Pneumatic Tool Research Institute. The main drafters of this standard are: Xin Yu, Zhang Yucheng, Chen Lanfang, Wei Wanjiang. This standard was first issued in March 17, and this is the first revision. 1 Model Figure
Machinery Industry Standard of the People's Republic of China
Rock Drilling Machinery and Pneumatic Tools
Noise Limit
This standard specifies the common noise limit values ​​of pneumatic tools and other products, JB 8551-1997
84003-134604
ZBJ4B 00---[48 (0267
This standard includes all kinds of pneumatic rock drilling machines and pneumatic tools. The products include explosion-proof electric rock drilling machines for mining, pneumatic picks, pneumatic shovels, pneumatic fasteners, three-head rivet machines, pneumatic gauges, pneumatic grinders, impact-stop pneumatic alarms, pneumatic end screws, pneumatic augers, pneumatic oxygen-pulling machines, etc. Reference standards
The following standards contain clauses and sections, which are not included in the standard. When the technical standard is published, the minor version is valid. All standards are not revised. All parties using this standard should explore the possibility of using the latest version of the following standards GES8-G
J/T 5126--91
Rock drilling machinery and pneumatic two-soldier noise market force method engineering method dynamic music leaf! Type pneumatic guard let
Type and type pneumatic horse method
JB/T TH7-
3 Rock drilling machinery noise limit
3.1 Rock drilling machine
3.1.1 The noise level of the submersible machine under the sequential submersible machine shall not exceed the limit specified in Table 1. 1
Rainbow limit B: A:
3.1.2 Gas-operated progressive rock drilling machine
The noise level of the gas-operated forward rock drilling machine shall not exceed the limit specified in Table 2
Production line
3, 1.3 The noise level of the internal-actual machine
direct submersible machine shall not exceed the limit specified in Table 3. 3
Our air pressure MFwww.bzxz.net
Production level R: A:
Approved by the Ministry of Machinery Industry in 1997-14[5
2- 14 -- 22
32 -21:
198 implementation
3.1.4 Rail-type rock drill
JB85511997
The noise level of rail-type rock drills should not be less than the limit values ​​specified in Table 4. Table 4
Test air pressure MPa
Product series
Sound level EA
3.1.5 Hand-held internal combustion rock drill
The noise level of hand-held internal combustion rock drills should not be greater than the limit values ​​specified in Table 5. Table 5
Engine idle speed wimin
Engine power ks
Sound power level A
3.1.6 Supported electric rock drill
The noise level of support electric rock drills should not be greater than the limit values ​​specified in Table 6 Table 6
New rated voltage V
|Kai weight kg
Production rate A
Supported compactor
Supported pressure reducing gear machine's sound level shall not exceed the limit specified in Table 7! Table 7
Oil HMPn
Sound power main
Two-blast electric rock drill
Expanded blasting electric rock drill's sound level shall not exceed the limit specified in Table B Table Island
Determined pressure V
Machine ke
Pneumatic equipment sound limit
41 Gas clamp
Gas picking shall not exceed the limit specified in the table Acceptance limit MIn
Positive ke
Medium power level B: A
Various specifications
127,380,660
4.2 Gas price
JB 8551—1 No. 97
The noise limit of the shovel should not exceed the limit value specified in Table 11 (pressure MPa
weight k
speed group BA)
4.3 The noise of pneumatic fixing machine should be within the limit value table specified in Table 11 (pressure MPa
weight k
speed group BA)
4. The noise of pneumatic motor
pneumatic rated machine should not exceed the limit value table 13 (diameter MPa
speed group BA)
4.5 The noise of air drill should not exceed the limit value specified in Table 13. Table 1
Acceptance pressure MPa
Sound power A
Pneumatic grinding wheel machine
The noise of the pneumatic grinding wheel machine should not exceed the limit value specified in Table 11. Table 14
Acceptance pressure MPa
Sound power A
Pneumatic grinding wheel machine
The noise of the end pressure pneumatic grinding wheel machine should not exceed the limit value specified in Table 15. Bag 15
MTa
Speed ​​wheel machine
JB 85511997
The noise of the impact type pneumatic grinding wheel machine should not exceed the limit value specified in Table 16. Table 16
Test air pressure MPa
Test point
Power level RA)
Pneumatic screwdriver
The noise of pneumatic screwdriver shall not exceed the limit specified in Table 17. 34
Acceptance air pressure M
Thread diameter mm
Noise intensity dB(A)
4.9 Pneumatic grinder
The noise of mobile pneumatic grinder shall not exceed the limit specified in Table 18. Table 13
Acceptance air pressure H Mra
Noise intensity dA
4.10 Pneumatic assembly machine
The noise of pneumatic relative assembly machine shall not exceed the limit specified in Table 19. Table 19
Air Collector
Standardized Environment
Sound Power Level Group BA
4.11 Air Motors
Referring to Chamber Type Air Motors
The noise level of air motors should not exceed the limits specified in Table 2C. Table 20
Air Pressure
Sound Power Level
Vane Type Air Motors
The noise level of vane type air motors (except vane type air motors) should not exceed the limits specified in Table 21. Table 1
Shenzhen EMP
Product Series
Production Performance Tester E2A!
Note, the air pressure compensation should comply with the provisions of B:T?737, the current document
411.3 starting parts pneumatic and starting
JB8551-1997
the noise of the vane type pneumatic motor should not exceed the value specified in Table 22. Table 22
Intake air pressure xPa
Product series
According to the power efficiency A>
Name of good visual belt
Past: The test pressure of the test pressure is suitable for the B door 512, 5 product noise residual method
The pressure measurement method of the product mouth should comply with the provisions of GB5898, among which 1.5 gas station, 4.6 pneumatic grinder, 4.8 pneumatic wire burning small and 4.9 pneumatic light receiving machine are measured in the idling state, and the other products are measured in the quality state,
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.