QB 1788-1993 Hediocarbaldehyde QB1788-1993 standard download decompression password: www.bzxz.net

Industry Standard of the People's Republic of China
QB1769~-1801-93
Standard for Spice
(Product Standard)
Published on April 29, 1993
Implemented on December 1, 1993
Published by the Ministry of Light Industry of the People's Republic of China
Subject Content and Scope of Application
IKAONKAca
Industry Standard of the People's Republic of China
QB 178B--93
Heliotropin
The standard specifies the requirements, test methods and inspection rules of heliotropin. This standard is applicable to the chrysanthemum wall prepared with yellow mold oil as the raw material. 2 Reference standards
CB/T14454.3 Color determination of spices
CR/T14451.2 Evaluation of aroma of spices
GB/T14451+17 Carbon value and excitatory compound content of materials Determination of amine content GB/T14454.7 Determination of odor of spices
GB/T14457.) Determination of solubility of isolated and synthetic spices in ethanol 3 Product chemical name, molecular formula, structural formula, molecular weight Chemical name 3,4 Diisocyanate molecular weight 5.13 (International atomic weight 1987) 4 Technical requirements
4.1 Color White crystals,
4.2 Odor Similar to perfume and herbal flower aroma.
4.3 Phosphorus content (℃)
4.4 Freezing point (℃) #86.0.
4.5 Refractory temperature (25℃)
5 Test method
5.1 Determination of free
Current GB/T 14454.3.
(V/V) B.
Ministry of Light Industry of the People's Republic of China approved 1333-12-01 implementation on April 29, 1993
5.2 Evaluation of aroma
GB/T 14464.2.
5.3 Determination of fermented bean content
JGR/F 14454.17.
5.4 Determination of specific points
See GB/T14454,7.
5.5 Determination of solubility, 25℃
CB/T 14457.1.
6 Inspection plan
QB 1788-3
B, 1 Evaluation process The production inspection department shall be responsible for the inspection of the finished products. The manufacturer shall ensure that the products shipped out of the factory meet the requirements of this standard. Each batch of products shall be accompanied by a quality certificate, which includes the product name, product name, trademark, date of manufacture, and the standard number of the product. 6.2 The acceptance unit has the right to accept various inspections according to this standard and inspect whether the quality of the products received meets the requirements of this standard. Each batch shall be inspected once, and different batches shall be inspected separately. 6.3 For each batch of packaging with less than 100 pieces (tins), two pieces (tins) shall be drawn, and for each batch with more than 16 pieces (tins), three pieces (tins) shall be drawn. After opening the packaging, check the quality, and then mix thoroughly. Then use the sample collector (tin) to take 5-1g of the sample, put it into the mixing device, and put it into two bottles respectively. The bottles shall be marked with: manufacturer name, product name, batch number, date of inspection, and one bottle shall be kept for backup. 6.4 If any index in the acceptance result does not meet the requirements of this standard, the manufacturer may directly conduct a re-test together with the manufacturer. If the re-test result still has any index that is unqualified, the batch of products cannot be inspected. 6.5 When the supply and demand parties have objections to the product quality, the two parties may negotiate, and the testing agency shall be responsible for the cost.
6.B Color, appearance, and freezing point are product inspection indicators. Solubility and formaldehyde content are type inspection indicators, which should be tested once every quarter.
Marking, packaging, transportation, storage
.1 For the sale of titanium rare earth grade plate made of benzene, the inside is polyethylene, and the outside is marked with: the manufacturer's name, product name, trademark, batch number, registration number, and ordering unit. If there are special requirements, please cooperate with the company and the production!
2 This product should be kept in the shade, under the condition of being smelted, away from light and heat, and the temperature should be below 20 degrees Celsius. 7.3 Under the conditions of personal protection, packaging is intact, and it is not opened, the shelf life of this product is half a car. 84
Added explanation: www.bzxz.net
Qe178833
and the standard of the Ministry of Light Industry Quality Society are issued by the Ministry of Science and Technology through the vertical scientific and technological innovation center. This standard is owned by the Tianjin No. 2 Material Factory and Xin'an Bi Spice Factory. The main drafter of this standard: Lian Xue Zhan Fang
-iKAoNiKAca=
Since the implementation of the standard, the original Ministry of Light Industry standard QB783-RI "Companion" has been made.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.