This standard specifies the process flow, unit composition, product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of needle punched nonwovens production combined machine (hereinafter referred to as needle punched combined machine). This standard is applicable to needle punched combined machines used to produce geotextiles, synthetic base fabrics and papermaking blankets using staple fibers as raw materials and needle punched. Needle punched combined machines used to produce other types of staple fiber nonwovens can also refer to FZ/T 93062-2003 Needle punched nonwovens production combined machine FZ/T93062-2003 Standard download decompression password: www.bzxz.net

This standard is proposed by China Textile Industry Association: Foreword
Wood standard launch enterprise national medicine multi-machine and photocopy standardization transmission committee white mouth, F6/T93062-2003
This standard drafting unit, Shanghai Textile Machinery Research Institute, Taiyang Longji Food Co., Ltd., Taihui Shuangfeng Nonwoven Equipment Factory, Yizheng Hairun Textile Machinery Co., Ltd. This standard is produced by the benefit of the general manager, ... 1 Scope
Needle punching machine for producing nonwoven fabrics
FZ/T93062—2003
This standard defines the process flow, unit machine set, product classification, technical requirements, inspection methods, inspection marks, packaging, transportation control and storage of "needle punching machine for producing nonwoven fabrics (hereinafter referred to as needle punching machine)". This standard is applicable to needle punching machines for producing staple fiber, finished fabrics and papermaking blankets. Needle punching machines for producing other types of fiber cloth are also applicable. 2 Normative reference documents
The following documents refer to the general provisions. The referenced clauses of this standard are all valid for the date of application of this standard. Any rectification or revision without prior notice shall not be retroactively applied to this standard. However, the parties to the standard are encouraged to study the new versions of these documents in accordance with the agreement made in accordance with this standard. The new version of this standard is as follows: G 7111 2012 Textile machinery noise test specification Part 1 Requirements for use (H3/T 7111.3 · 2332 Textile machinery noise test specification Part 3: Nonwovens - 19% + synthetic materials - Nonwovens made of needle-punched fabrics - F2 90001--199°
Anti-woven machinery product packaging
FZ/T20074-1965Xinlang machinery product coatingFZ/90089.11905wwW.bzxz.Net
Spin more! Machine nameplate type, size and transmission technology must be FZ/T 9008u.2
F7/T320.17
FZ: 93047
FZ/T92U6
F7/T 93061—2033
FZ/r 99014
3Product classification
3. 1Technical process
Textile machine content
Old cloth bone wine technical record
Non-woven fabric drying machine
Non-woven fabric laying machine
Electrical equipment technology of loom strips
Local products are opened and mixed, and then fed into the cotton machine and then enter the carding machine for separation: forming a whole fiber web and entering the sealing machine, which can be laid into a red network, Enter the needle sail machine, the needle plate with needles moves up and down, and the crown and other reinforcements make the fluffy red net reach a strong non-woven fabric. The final stone edge rolling system is to open the skirt and use a certain amount of suction gun to manage the net → laying the net → embroidery → trimming the edge 3.2 The unit composition of the combined machine is
opening machine → drawing machine → differential lifting machine → threshold management machine → net machine embroidery combination, + rolling machine 3.3 Model display method
CL BG
Working width < box width, unit is cm)
Design sequence and
"Needle making machine total number
in 10 sets: the first format is 0)
Counting needle method nonwoven machine test code
Nonwoven machine code
United Kai code
--Enterprise code
EZ/T93062—2003
3.4 ​​Basic parameters
See the table! ,
Working qualification enm
Secondary work degree nmm
Ratio Mx/1
Lachuan material
Study maintenance length design/nn
Maintenance electricity x
Total abandoned capital
110.320..30,440.E5:,r5.,-00.80120,240.36.45.60
:.5.-.10.5
Note, the work study of the last record can be set as the joint chaotic 1 4.Technical requirements for workmanship
4.1 Fabric quality
Non-woven fabric surface should be smooth, without needle marks and chain links. The quality requirements of the market shall be consistent with G/T17636 and 2933: The quality requirements of non-woven fabrics shall be consistent with the national standards and industry standards. 4.2 Unit requirements of combined machine
1,2.1 Regarding the loosening unit
Make sure that people walk normally, the frame is light, the loosening effect is good, the fiber damage is small, the thread jump can reach 0.0 m.
4.2.2 Give the machine accurate and convenient control, the frame selection is stable, the reporting weight is accurate and strict, the lower the requirements are, the layer is uniform, and the hand is determined.
4.2.3 Mesh machine
According to the provisions of 2/T9306℃2001.
4.2.4 Pinning machine
According to the provisions of z/950e12003.
4.2.5 Needle loom
According to the provisions of 2/T92057-1993.
1.3 Quality requirements for all units
4.3.1 The units are reasonably arranged, correctly connected, stable in rotation, and can meet the requirements of product quality optimization and variety change.
4.3, 2 In the direction of fabric transportation, there is no resistance, knots, and unevenness caused by the problem of unevenness. 4.3.3 Control system
4.23.3.1 The central control system shall ensure that all units of the machine can be operated efficiently, coordinated, and continuously. 4.3.3.2 The control system shall be able to select and test each unit. 4.3.3.3 The secondary control system shall be able to realize the functions of control, working condition display, storage and activation, temporary investment, etc. for the joint machine. 4.3.3.4 The system shall be able to detect the seat, start, stop and emergency brake functions correctly without regression. 4.3.3.5 The control system shall have the function of stopping the enterprise and stopping the vehicle quickly. 2
4.4 Safety requirements
F2/T93062--2C13
4.4.1 The safety requirements of the service unit machine shall comply with the corresponding unit machine safety requirements and regulations. Each unit of the machine has a certain degree of protection and safety. Before starting the machine and performing normal operation, all protection and safety devices must be evaluated and started: the machine must be studied and marked with danger signs and management systems. 4.4.2 The insulation of electrical equipment and energy circuits is good, and the external protection parts are properly connected. The grounding resistance is U.114.4.3 The insulation resistance of electrical equipment is 21MD
4.4.4 Voltage requirements for electrical equipment, the test voltage is 150) V (AC), continuous 1rin, and there is no flashover and breakdown. 4.5 The sound of the whole machine is not greater than the A level. 4.6 Product installation requirements
According to FZ/TWH4-1995 regulations,
5 test method
5.2 Opening unit opening and closing three times a day, hit the hand to rest the outer diameter jump monthly percentage meter, meter frame, when the signal belt is parked, 5.3 give the structure of the machine to feel the daily plan,
5.44,3.1,1.3.2 in the full load adaptation test. Daily test. 5.54.3.3 control system in the empty car operation and condition operation test, the number of welcome, test. 5.64,4.2~·4.4.4 in accordance with FZ/T9)14-·1995 regulations, GT/T 711.1-GC2 and GB/T 7111.32002 regulations test
5.8 station coating according to F2/900741995 regulations, 5.9 other daily test, suffering.
5.10 Empty load test
5.10.1 Test conditions: All units are operated at the designed working speed. 5.10.2 Test time: h
5. 10.3 Test duration: 4.3., 4.3.3, 4.1, 1.5, 1, .5.11 Standard load test
5.11.1 Test conditions:
Empty load test is to be carried out on the following days:
h) T process is 250g/mt. The fabric process should be determined or determined according to the process requirements of other regional standards. 5. 11.2
Test time, ten days
Test items: 4, 1, 4.3.
6 Inspection rules
6.1 Inspection
6.1.1 Unit machine
6.1.1.1 Each unit machine manufacturing: after the quality control inspection is qualified, the certificate of conformity shall be issued. 6.1.1.2 Units equipped with power plates must be tested for empty vehicle operation. 6.1, 1. 3 Inspection: 4. 2, 4. 4.
6.1.2 After the joint machine is installed on site, it must be tested with empty car in 5.10 and tested with working load in 5.10. The inspection certificate can be issued only after the inspection is qualified.
6.2 After leaving the factory (according to 6.1.1.2 After the running test is qualified: within one year, if there is any defect, it will be issued together with the currency FZ/T 933622003
factory for disposal.
7 Marking, packaging, transportation and storage
1.1 Marking
According to the provisions of Fz/9133.1-1SSGF7039.2
21996.
7.2 Packaging
According to the provisions of F290001-15s7,
7.3 Transportation
Products should be transported from the specified location, and the packaging box should be placed in the specified direction for a specified period of time without waiting or changing the direction. 7.4 Storage
Products must be well-labeled and suitable for the service process. The actual items in the packaging must be valid for one year,
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.