JB/T 8010.16-1999 JB/T 8010.16-1999 Machine tool fixture parts and components Bidirectional clamp JB/T8010.16-1999 Standard download decompression password: www.bzxz.net

ICS 25. 080. 01
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixturesBidirection clamp plate
This standard specifies the bidirectional clamp plate with thread specifications of M4M24. 2 Referenced standards
JB/T8010.16—1999
Replaces JB/T8010.16—1995
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. Parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T699-1988
JB/T8044—1999
3 Dimensions
Technical conditions for high-quality carbon structural steel
Technical requirements for machine tool clamps and their parts and components
The dimensions are shown in the following figure and table.
Approved by the State Machinery Industry Bureau on August 6, 1999Www.bzxZ.net
Implementation on January 1, 2000
4 Technical parts
Basic limit deviation
4.1 Material: 45 steel in accordance with the provisions of GB/T699. 4.2 Heat treatment: 35~40HRC.
JB/T8010.16-1999
H, basic limit deviation
Dimension B11
4.3 Other technical conditions shall be in accordance with the provisions of JB/T8044 5 Marking
5.1 Marking example:
d-M12, 48mm A-type bidirectional pressure plate
Pressing plate AM12×48JB/T8010.16—1999102
151410
Limit deviation
182047
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.