This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of aminoacid resin-based hose roller coating ink. This standard applies to hose roller coating ink used on hose roller coating printing machines. This ink is used for base color roller coating printing on the surface of aluminum, lead and tin hoses. QB/T 2026-1994 Hose roller coating ink QB/T2026-1994 Standard download decompression password: www.bzxz.net
This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of aminoacid resin-based hose roller coating ink.
This standard applies to hose roller coating ink used on hose roller coating printing machines. This ink is used for base color roller coating printing on the surface of aluminum, lead and tin hoses.
Some standard content:
Light Industry Industry Standard of the People's Republic of China Hose Roller Coating Ink 1 Subject Content and Scope of Application QB/T 2026-1994 This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of amino alkyd resin hose roller coating ink. This standard applies to hose roller coating ink used on hose roller coating printing machines. The ink is used for base color roller coating printing on the surface of aluminum, lead and tin hoses. Reference standards GB/T1731 Determination of paint film flexibility GB3186 Sampling of coating products GB/T14624.1 Ink color test method GB/T14624.2 Ink tinting strength test method QB559 Ink fineness test method QB574 Ink viscosity test method ZBA17005 Printing ink product classification, naming and model 3 Product classification According to product color, it is divided into white and one. 4 Technical requirements All technical indicators and performance requirements of the product must comply with the provisions of Table 1. Table 1 Z70101 5Test method Product name Amount of white oil applied to hose Approximate standard sample 5.1 Color shall be in accordance with GB/T14624.1. 5.2 Tinting strength shall be in accordance with GB/T14624.2. 5.3 Fineness shall be tested in accordance with QB559. 5.4 Viscosity shall be tested in accordance with QB574. 5.5 Flexibility of paint film shall be tested in accordance with GB/T1731. 5.6 Dryness test method 5.6.1 Test principle Color strength, %www.bzxz.net 95~110 Fineness, μm Viscosity, mPa·s 350~700 Permanence, min Flexibility, mm Roll the ink evenly on the surface of the alloy plate of the hose made of aluminum, lead, tin and their alloys, and observe whether the ink film is dry after baking for a certain time and temperature. The information is expressed in minutes. 5.6.2 Materials QB/T 2026--1994 5.6.2.1 Hose alloy plate: thickness ≤ 0.5mm, specification 60mm×40mm, flat surface without obvious bulge or crack. 5.6.2.2 Rubber pad: 240mm×140mm×4mm. 5.6.3 Instrument 5.6.3.1 Oven: 0~300℃, sensitivity ±2℃. 5.6.3.2 Wire rod: metal rod g (9±0.05)mm, length L170mm, length L of the stainless steel wire winding part is (100±0.50)mm, steel wire 0.38mm, closely wound and arranged, neatly without gaps. 5.6.3.3 Timing clock. 5.6.4 Test conditions The test should be carried out at (140±2)℃. 5.6.5 Test steps 5.6.5.1 Adjust the temperature of the oven to (140±2)℃. 5.6.5.2 Use a glass rod to adjust the sample, take a small amount and drop it on the hose alloy plate with a rubber pad. Note that the ink film width is not more than 20mm and the length is not less than 30mm. 5.6.5.3 Immediately use a wire rod to scrape it evenly from top to bottom, and prepare 2 pieces at the same time. 5.6.5.4 Immediately put the prepared sample into the oven with constant temperature, and start the timing. Take it out and evaluate it after 5 minutes. 5.6.6 Test results Touch the surface of the ink film with your finger. If it is not sticky, it is dry. 6 Inspection rules 6.1 Product batch: a unit product completed by a single machine or unit at one time is a batch. 6.2 The product shall be sampled according to the method of GB3186. The sample shall be divided into two parts, one sealed for reference and the other as a sample for inspection. 6.3 Determination of unqualified batches: Each batch of products shall be sampled and inspected according to GB3186. If one or more technical indicators are unqualified, the batch of products shall be unqualified. 6.4 The inspection department of the manufacturer shall inspect the products according to the standard and ensure that all products leaving the factory meet the technical indicators of this standard. The products shall have a certificate of conformity and, if necessary, instructions for use and precautions. 6.5 The consignee shall have the right to inspect the products according to the provisions of this standard. If it is found that the product quality does not meet the requirements of this standard, the supply and demand parties shall jointly re-sample and inspect according to GB3186. If it still does not meet the technical indicators of this standard, the batch of products shall be unqualified and the consignee shall have the right to return the products. 6.6 The supply and demand parties shall check and verify the packaging and quantity of the products. If the packaging is found to be leaking or the quantity is out of stock, the relevant departments shall be notified in a timely manner. 6.7 When there is a dispute between the supply and demand parties over product quality, the product quality supervision and inspection agency shall perform arbitration inspection. 6.8 Inspection classification 6.8.1 The five quality indicators of color, tinting power, fineness, viscosity and dryness are factory inspection items. 6.8.2 Flexibility performance requirements are type inspection items. Type inspection should be carried out in the following situations. a. Trial production and identification of new products or old products transferred to the factory for production; when there are major changes in structure, materials and processes that may affect product performance, the type inspection cycle is once every three months after normal production; d. When resuming production after long-term suspension. 7 Marking, packaging, transportation and storage 7.1 This product is flammable and should be packaged in sealed iron barrels in accordance with the regulations for packaging flammable products. 93 QB/T2026--1994 7.2 The iron drum and outer packaging box should be labeled or sprayed with trademarks, indicating the manufacturer's name, address, product name, model, standard number, weight, batch number, manufacturing date and the "flammable, do not invert" sign. 7.3 This product must not be stored in the open air. The warehouse must be dry and ventilated to prevent moisture and stay away from fire. 7.4 During transportation, it must be carried out in accordance with the regulations for flammable products. During transportation and handling, it must not be thrown, dropped or collided to prevent the packaging from breaking and causing fire. 7.5 This product is valid for one year from the date of manufacture. Additional instructions: This standard was proposed by the Quality Standard Promotion Department of the China Light Industry Federation. This standard is under the jurisdiction of the National Ink Standardization Center. This standard was drafted by Suzhou Ink Factory and Tianjin Ink Company. The main drafters of this standard are Zhang Quannan and Li Guoqi. 94 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.