This specification is applicable to the design of new, expanded and rebuilt oilfield water injection projects. SY/T 0005-1999 Oilfield Water Injection Design SpecificationSY/T0005-1999 Standard download decompression password: www.bzxz.net

Standard of the People's Republic of China for petroleum and natural gas industry Code for design of oilfield water injectionSY/T0005—1999Editor: Daqing Oilfield Construction and Design InstituteApproved by: Petroleum Industry Press, State Administration of Petroleum and Chemical Industry1999BeijingBasic provisionsWater injection stationWater storage tankWater injection pump roomSimple water injection station·Water injection network·
Water distribution room··
Water injection wellheadPolymer preparation station·
Polymer injection station·
Polymer injection network
Appendix AAppendix B
Appendix C
Water quality prediction for water injection in clastic reservoirs Recommended indicators
Table for selection of safety factors for steel pipes
Table for selection of E values
Explanation of harmonized terms for standards
Appendix Specification for Design of Water Injection for Oil
Explanation of clauses
Document of the State Administration of Petroleum and Chemical Industry
State Petrochemical Government (1999) No. 201
About the approval of 87 oil and gas industry standards including "Specifications for Design of Corrosion Control Engineering for Steel Pipelines and Storage Tanks"
China National Petroleum Corporation:
The draft of 87 oil and gas industry standards including "Specifications for Design of Corrosion Control Engineering for Steel Pipelines and Storage Tanks" submitted by your company for approval has been approved by our bureau and is now published. Standard name and number:
Mandatory standard
SY 0007—1999
Recommended standard
SY/T 0005—1999
Design specification for corrosion control engineering of steel pipelines and storage tanks (replacing SYJ 7—&4)
Design specification for oilfield water injection
(replacing SYI 5---89, SY/T 007093)SY/T 06—1999
SY/T 0026—1999
SY/T 0045--1999
SY/T 0046—1999
SY/T 00471999
SY/T 0059-1999
SY/T SY/T 0063—1999
SY/T 0066—1999
SY/T 00671999
SY/T 00941999
SY/T 05561999
SY/T 5025—1999
SY/T 5031—1999
SY/T 5079—1999
Design specification for produced water treatment in oilfield
(replaces SYJ6—89)
Test method for water corrosion resistance (replaces SYJ26—87)Design specification for electric dehydration of crude oil (replaces SYJ45—91)Design specification for water injection deoxygenation in oilfield
(replaces SYJ 46--91)
Technical specification for internal cathodic protection system of crude oil processing container (replaces SYJ47-91)
Technical specification for controlling the hardness of weld seams of steel equipment to prevent sulfide stress cracking (replaces SYI59-91)
Test method for leak detection of pipeline anticorrosion layer
(replaces SY 0063-92)
Non-destructive measurement method for thickness of steel pipe anticorrosion layer (magnetic method) (replaces SY 0066--92)
Test method for impact resistance of pipeline anticorrosion layer (limestone drop method) (replaces SY0067--92)
Test method for cathodic peeling of pipeline anticorrosion layer (bonded electrolytic cell method)
Quick switch breeding plate (replaces SY525691) Specification for drilling and well repair derrick and base
(replaces SY SY/T 5112-1999
SY/T 51131999
SY/T 5122-1999
SY/I 5148--1999
SY/T 5153--1999
SY/T 5154--1999
SY/T 5164--1999
SY/T 5168--1999
SY/T 51711999
SY/T 5231—1999
SYT 52321999
SY/I S327--1999
Specification for drilling and oil production lifting equipment
(Replace SY5112—86)
Lifting ring (Replace SY5113--93)
Analysis method for carbon, hydrogen and oxygen in rock organic matter (Replace SY 5122-86)
Pneumatic components for oil drilling and production equipment
(Replace SY 5148—-86)
Determination of wettability of reservoir rocks
One-way throttle valve
(Replace SY 5153.1—87, SY 5153.287.SY/T 5153.3--951
Sampling method for fluid in oil and gas reservoirs
(Replaces SY 5154--87)
Three-cone drill bit (Replaces SY5164--91)Classification and coding system for parts of oil drilling and production equipment, (Replaces SY5168--87)
Specification for oil geophysical detection cover
(Replaces SY/T 5171--93)
Computer security and confidentiality management regulations for oil industry (Replaces SY 5231--91)
Software engineering specifications for oil industry
(Replaces SY 5232.1--5232.8--91 SY 5232.10--91 SY 5232.11--91 SY 5232.14---91)
Radionuclide carrier trace logging
(replacing SY 5327-88)
SY/T 5345-1999
SYT 5356-1999
SY/T 53571999
SY/T 5370—1999
SYT 53831999
SY/T 5434-1999
SY/T 5486-1999
SY/T 5609-1999
SY/T 5612.1--1999
SY/T 5612.21999
SY/T 5612.3--1999
SY/T 5619—1999
SY/R 56331999
Determination of relative permeability of oil and water
(Replaces SY5345—89)
Conventional coring method
(Replaces SY 5356—89.SYT 5489--92)Stuck drill soaking solution method
(Replaces SY 5357---89)
Surface and interfacial tension determination method
(Replaces SY/T5370--91SY/I5545-92, SY/T 5617-93)
Screw drill tool (Replaces SY/T538391)
Method for particle size analysis of debris
(Replaces SY 5434--92)
Technical specification for testing unconventional formations
(Replaces SY 5486-92, SYT 5839-93SY/T 6061-94, SY/T 6019-94)Oil drilling rig types and basic parametersbZxz.net
(Replaces $Y/T 560993)
Drilling fluid purification system degasser
(Replaces SY/T5612.1-93)
Drilling fluid purification system cleaner
(Replaces SY/T 5612.2--93)
Drilling fluid purification system cyclone
(Replaces SY/T5612.3—93)
Design method of lower drilling tool assembly for directional well
(replace SY/T5619--93)
Format of petroleum logging drawing (replace SY5633-93)SY/T 5639--1999
SYT 56341999
SY/T 578S--1999
SY/T 5788.3—1999
SY/T 5801—1999
SY/T 5820--1999
SY/T 5828--1999
SY/T 5891.1-1999
SYT 39551999
SYT 59801999
SY 6382-1999
Rotary gas joint for pneumatic components of oil drilling equipment (replaces SY/T5639-93)
Use and maintenance of oil logging cables
(replaces SY/T5634-93)
Guidelines for classification and coding of information in the oil industry
(replaces SYT5785---93)
Oil and gas exploration well geological logging regulations
(replaces SY 536489, SY 5365--89.SY/T 61571995, SY/T 5788.3-93SY 5090---85)
Regulations for inspection and acceptance of field data for oil gravity and magnetic exploration (replaces SY/T5634-93)
Guidelines for classification and coding of information in the oil industry
(replaces SYT5785---93)
Oil and gas exploration well geological logging regulations
(replaces SY 536489, SY 5365--89.SY/T 61571995, SY/T 5788.3-93SY 5090---85) 5801-93)
Technical specification for petroleum magnetotelluric sounding method
(replaces SYT 5800--93SY/T 5820-93)Detailed rules for quality inspection and acceptance of petroleum geophysical survey results (replaces SY/T 5828--93)
Specification for the production of concrete targets for perforator detection in oil and gas wells (replaces SY/T 5891.1-93)
Directional well drilling technology and wellbore quality requirements (replaces SYT 595594, SY/T 5948--94)Design specification for oil test in exploratory wells
(replaces SY/T5980-94, SY5514-92SY.T 6036--94.SY 548592.
SYrT 597594SY/T 601194.
SY 5484—92)
Technical Management Regulations for Oil Pipeline Heating EquipmentSY/T 6383--1999
SY/T 6384--1999
SY/r 6385—1999
SY/r 63861999
SY/T 6387----1999
SY/T 6388---1999
SY/T 6389—1999
SY/T 6390----1999
SYT 6391--1999
SY/T 63921999
SYT 63931999
SY7T 6394-1999
SYT 63951999
SY/T 6396--1999
SY/T 6397---1999
SY/T 6403—1999
SY7r 64041999
sY7r 64051999
SY/T 64061999
Pigmentation procedures for long-distance natural gas pipelines
High-temperature relative permeability determination of heavy oil reservoirs
Determination method of rock porosity and permeability under overburden pressureTechnical specification for onshore high-resolution seismic exploration data acquisitionOPS EIS-EAGLE (24-bit) seismic data acquisition system inspection items and technical indicators
TELSEIS-STAR seismic data acquisition system inspection items and technical indicators
ARAM-24 seismic data acquisition system inspection items and technical indicators
GDAPS-4 seismic data acquisition system inspection items and technical indicators
SEG-D seismic tape recording format
Oilfield water injection information code
Technical regulations for energy conservation in the design of long-distance crude oil pipeline projects (replacing SYI35--90)
Dry mixing operation method of oil well cement and admixtures (admixtures)
Heavy salt water test procedure
Technical requirements for collision prevention of cluster wells
Evaluation method of fungicide for drilling fluid
Analysis and identification method of chitin
Inductively coupled plasma atomic emission spectrometry analysis of metal elements in sediments
Geological design and training specifications for geophysical exploration work areasMaintenance and calibration of magnetic single and multi-point photographic inclinometerSYT 64071999
SYrr 6408-1999
SYT 6410-1999
SY/T 6411--1999
SY/T 6412--1999
SY/T 6413—1999
SY/T 64141999 | | tt | 64201999
SY/T 6421-1999
SY/T 6422-1999
SY/T 7502--1999
Specification for drill string components for rotary drilling
Maintenance and use of drilling and workover and support basesCalibration of production well output profile logging instrument
General technical conditions for detonating cord for oil and gas
Technical specification for perforating with tubing conveyance
Procedure for acquisition of numerically controlled logging data
Method for determination of microscopic components of whole rock optical slice
Quality assessment and archiving of logging data for oil and gas explorationRecommended methods for installation, maintenance and operation of internal combustion enginesPerformance of casing, tubing and drill pipe
Connection performance of round threaded casing under combined action of internal pressure and bending
Use and maintenance of glass fiber pipe
Technical specification for design of surface engineering of oilfield (replacing SYI 4490
Determination of heat loss of equipment and pipelines
(Replaces SYJ 4018-87)
Determination of energy-saving effect of energy-saving products in petroleum enterprises Analysis of oilfield gas composition Low-temperature condensation sampling gas chromatography (Replaces SY7502--85)
The above standard shall be implemented from December 1, 1999. State Administration of Petroleum and Chemical Industry
May 17, 1999
This specification is based on the arrangement of the former China National Petroleum Corporation (98) Zhongyou Technology Supervision No. 33 "Notice on Issuing the 1998 National Standard and Industry Standard Formulation and Revision Project Plan for the Petroleum and Natural Gas Industry", and the Daqing Oilfield Construction Design Institute is responsible for revising the "Oilfield Water Injection Design Specification" SYI5-89. This revision summarizes the experience of onshore oilfield water injection design in my country in the past decade and the application results of new technologies and processes. It widely solicits the revision opinions of various design units on the original design specifications, makes partial modifications to the content and structure, adds injection polymers, terminology explanations and other contents: At the same time, the writing format has also been greatly adjusted: and the "Oilfield Water Distribution Room Design Specification SYT0070-93" compiled by the Survey and Design Institute of Henan Petroleum Exploration Bureau was revised and compiled into this specification. From the date of its entry into force, this specification will replace SYJ5-89 and SY→I0070-93 at the same time.
This specification is proposed by China National Petroleum Corporation. This specification is under the jurisdiction of the Planning and Design Institute of China National Petroleum Corporation. The main editor of this specification: Daqing Oilfield Construction Design Institute. The participating units of this specification: Survey and Design Institute of Henan Petroleum Exploration Bureau. The main drafters of this specification are Tan Wenliang, Jia Shenqian, Zhang Qi, Huang Yuanqi, and Sun Zhiwei.
This specification is interpreted by the Daqing Oilfield Construction Design Institute.
1.0.1 In order to meet the needs of oilfield water injection project construction, unify design standards and technical requirements, ensure design quality, and achieve the goals of advanced technology, economic rationality, and safety and applicability, this specification is specially formulated.
1.0.2 This specification is applicable to the design of new, expanded, and rebuilt oilfield water injection projects on land.
1.0.3 The design of oilfield water injection engineering shall be based on the approved "Oilfield Development Plan" and designed in accordance with the principles of increasing production and saving, energy saving and consumption reduction; and shall follow the principles of protecting the environment, comprehensive utilization, and turning harm into benefit. After the oilfield produced water is treated and qualified, it shall be given priority for reinjection.
1.0.4 The design of oilfield water injection engineering shall actively and prudently adopt new processes, new equipment, new materials, and new scientific research results; conscientiously summarize experience and continuously improve the design level. 1.0.5 In addition to complying with this specification, the design of oilfield water injection engineering shall also comply with the provisions of the relevant mandatory standards currently in force in the country. 2 Terms
2.0.1 Oilfield water injection engineering Oilfield water injection engineering The general term for surface production facilities and auxiliary production facilities for water injection in the field. 2.0.2 Closed water injection system Closed water injection system A water injection system that takes air isolation measures in the low-pressure part, such as oil seals or air seals in the water storage tank and water seals at the pump inlet packing. 2.0.3 Water injection pressure is the pressure at the wellhead where water is injected into the oil layer to maintain the oil layer pressure. 2.0.4 Polymer
A natural or synthetic substance with a high molecular weight formed by the polymerization of a large number of simple molecules (monomers). Polymers used for water injection are mainly polyamides with a relative molecular mass of usually 800 × 104 --2300 × 104. 2.0.5 Prepositive liquid is a liquid injected to protect the front edge of the polymer plug (displacing liquid) from being adsorbed, diluted and weakening the displacement effect.
2.0.6 Displacing liquid is a polymer solution injected to improve the oil displacement effect. 2.0.7 Primary polymer liquor is a polymer solution diluted to become the injection liquid (can be referred to as the mother liquor). 2.0.8 Aging
The process of fully dissolving the polymer in water. 2.0.9 Polymer dispersing device A device that evenly mixes the polymer and water in proportion. 2.0.10 Polymer preparation station A station that mixes the polymer and water in proportion to prepare a polymer solution. 2.1 Polymer injection station
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.