JB/T 3260-1999 This standard is a revision of JB 3260-83 "LTG Series Hot Metal Ladle Types and Basic Parameters". During the revision, only editorial changes were made according to relevant regulations, and the main technical content remained unchanged. This standard specifies the types and basic parameters of LTG type hot metal ladle. This standard is applicable to LTG type hot metal ladle used in open hearth furnaces, electric furnaces, and converters in steel mills of metallurgical enterprises. This standard was first issued on June 16, 1983. JB/T 3260-1999 LTG Series Hot Metal Ladle Types and Basic Parameters JB/T3260-1999 Standard Download Decompression Password: www.bzxz.net

ICS77.180
Machinery Industry Standard of the People's Republic of China
JB/T3260—1999
LTG series hot metal ladle
Type and basic parameters
The type and basic parameter of LTGseries hot metal lade1999-06-28 Issued
National Bureau of Machinery Industry
2000-01-01 Implementation
JB/T3260—1999
This standard is a revision of JB326083 "LTG series hot metal ladle type and basic parameters". Only editorial changes were made to the original standard during the revision, and the main technical content has not changed. This standard replaces JB3260—83 from the date of implementation. This standard is proposed and managed by the Technical Committee for Standardization of Metallurgical Equipment. Drafting unit of this standard: Dalian Heavy Industry Group Co., Ltd. The main drafters of this standard are: Li Baojin, Xia Jiying, Liu Qingguo, and Sun Rilei. This standard was first issued on June 16, 1983. Scope
Mechanical Industry Standard of the People's Republic of China
Type and basic parameter of LTG series hot metal ladle
The type and basic parameter of LTG series hot metal ladle This standard specifies the type and basic parameters of LTG type hot metal ladle. This standard is applicable to LTG type hot metal ladle used in converter workshops of steel mills of metallurgical enterprises. 2 Type and basic parameters
2.1 The type of hot metal ladle is shown in Figure 1.
2.2 Basic parameters
The basic parameters of LTG series hot metal ladle shall comply with the provisions of Table 1. Approved by the State Machinery Industry Bureau on June 28, 1999, JB/T3260-1999 replaced JB326083 and implemented on January 1, 2000. LTG-25-1, LTG-45-1, LTG-70-1, LTG-140-1, LTG-160-1. Loading capacity. The JB/T3260-1999 model consists of three parts. The first part uses a code to indicate the product category and name. The second part uses numbers to indicate the product specifications. The third part indicates the product structure evolution form, which is expressed in numbers. Example: LTGbzxz.net
Design serial number
Specification (molten iron volume, t)
Name (molten iron tank)
Category (smelting equipment)
Mechanical industry standard
Type and basic parameters
LTG series molten iron tank
JB/T3260—1999
Published by the Mechanical Science Research Institute
Printed by the Mechanical Science Research Institute
(No. 2, Shouti South Road, Beijing No.: Postal code 100044)*
1/16 Printing sheet 1/2 Number of words 6000
Format 880×1230
First printing in December 1999
First edition in December 1999
Printing 1-500
Price 500 yuan
Number 99-1155
Mechanical Industry Standard Service Network: http/AvwwJB.ac.cn66609 /
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.