JB/T 2452-1999 JB/T 2452-1999 Trough model, basic parameters and dimensions JB/T2452-1999 Standard download decompression password: www.bzxz.net

ICS77.180
Machinery Industry Standard of the People's Republic of China
JB/T2452—1999
The type and basic data and the size for furnace charge trans port car Issued on 1999-06-28
National Machinery Industry Bureau
Implemented on 2000-01-01
JB/T2452—1999
This standard is a revision of JB2452—79 "Main technical contents of furnace charge trans port car are as follows:
Type, basic parameters and size". Compared with JB2452-79, the table size B of this standard is changed from 2370mm to 2140mm; one of the original standards has been edited.
This standard replaces JB2452—79 from the date of implementation. This standard is proposed and managed by the Metallurgical Equipment Standardization Technical Committee. The drafting unit of this standard: Dalian Heavy Industry Group Co., Ltd. The main drafters of this standard: Xie Taiping, Bao Yuhua, Gao Yiping. This standard was first issued on October 1, 1979. Machinery Industry Standard of the People's Republic of China
Type, basic parameters and dimensions of trough car
The type and basic data and the sizforfumacechargetransport car1 Scope
This standard specifies the type, basic parameters and dimensions of trough car. This standard applies to trough cars used to transport furnace charges in steel mills of metallurgical enterprises. 2 Type, basic parameters and dimensions
The type is shown in Figure 1.
The basic parameters and dimensions shall comply with the provisions of Table 1 and Figure 1. Table 1
Basic parameters
ZLK-40
Center distance
4960/(5760)
Connection center
To rail surface height
517(880)
Through track
Minimum curvature
And dimensions
Table sizeWww.bzxZ.net
4700×2140
4700X2140
1The dimensions in brackets indicate the center distance of the short-neck automatic coupler connection and the height from the connection center to the rail surface.
2ZLK model K is the characteristic code Interchangeable coupler State Machinery Industry Bureau 1999-06-28 approved JB/T2452-1999
Replace JB245279
Overall dimensions
4950×2410X1000
4950X×2410X1085
Can be installed|| tt||10 Short-neck automatic
2000-01-01 implementation
Figure 1 ZL-40, ZLK-40 tank car
JB/T2452-1999
Model marking method
JB/T2452-1999
Load code, t
Characteristic code (interchangeable coupler K, others omitted) Code for trough vehicle
Code for metallurgical vehicle
Republic
Mechanical industry standard
Type, basic parameters and dimensions of trough vehicle
JB/T2452-1999
Published and issued by the Mechanical Science Research Institute
Printed by the Mechanical Science Research Institute
(No. 2 Shouti South Road, Beijing: Postal Code 100044)*
Format 880×12301/16 Printing sheet 1/2 Number of words 8000First printing in December 1999
First edition in December 1999
Print number 1-500
Price 500 yuan
No. 99-1157
Mechanical industry standard service network: http/kwwwJB.ac.cn666
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.