HG/T 2375-1992 Glass-lined horizontal storage container HG/T2375-1992 standard download decompression password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
Glass Horizontal Storage Container
1 Subject Content and Scope of Application
HG / T 2375 -- 92
This standard specifies the type, basic parameters, main dimensions and technical requirements of glass horizontal storage containers. This standard applies to glass horizontal storage containers with a nominal pressure equal to or less than 0.6MPa, a nominal volume of 3000L to 30000L, and a medium temperature of 0℃ to 150℃.
2 Reference Standards
GB150 Steel Pressure Vessels
HG2036 Glass Container Parameters
HG/T2055 Glass Manhole
HG/T2105 Sugar Glass Equipment Loose Flange
HG/T2134 Glass 90° Elbow
HG /T2143 Sugar glass equipment nozzle
ZBG91001 Sugar glass liquid level gauge
ZBG94004 Technical conditions for weighing glass equipment
ZBG94007 Quality classification standard for sugar glass equipmentJB1i67 Saddle support
3 Types, basic parameters and main dimensions
3.1 Types, basic parameters and main dimensions are in accordance with the relevant provisions of HG2036 standard, see Figure 1. Figure 2, Table 1 and Table 2. Approved by the Ministry of Chemical Industry of the People's Republic of China on September 15, 1992 and implemented on July 1, 1993
ww.bzsoso.cmHG / T 2375 -- 92
Figure 1 Horizontal storage container for sugar glass
A large vertical efficiency
3000033300
HG /T 2375—92
Dimension table
①In the table, the simplified whole warehouse S and the head wall thickness S are all reference nominal thickness, male
:65/ 50
65 / 50
400×300
400 × 300
40g×300
65 / 50 : 400 × 300
65 / 50400 × 300
65/50 1
65 / 50
65/ 50
65/ 50
The spare port can be used to install the pressure gauge port and install the safety reading or bursting drum device, and can also be used to install the pressing pipe. Liquid level gauge
Nominal length 2
1400× 2
1500×2
1600 × 2
1900×[
1800×1
2000 × 1
1900×1
Wmm
3496115901
3900:1880
53742930
50282280
52822370
550 ; 761
Standard number
ZBG 91001 | | tt | | HG/T 2134 | 2375—92www.bzxz.net
Continued Table 1
2704337
2908332
31121 324
1100[1200
1300|1300
13001400
14001400||tt| |14001400
15001500
16001600
16901420
238 1930
238 21301890
1800 1900 238
1900 :2000 : 238
Sugar glass liquid level gauge
Details
Glass 90° elbow
Jing glass manhole
Elliptical head
According to the corrugated glass pipe mouth A type
Tang glass equipment
Loop flange
Type support
2470 2240
26502430
100300
Combination
10Q235-A or glass conductor
[0 or Q 235-A
Assembly
10 or Q235-A
Q 235-A
KTH 350-10
Q235-A
Height=350mm
W.3.2 Marking
HG / T 2375 — 92
Marking example:
Nominal volume 12500L sugar glass horizontal storage container, marking: W12500HG/T 2375—92
4 Technical requirements
Standard code
Nominal volume
Storage container type
4.1 The manufacturing, inspection and acceptance of glass horizontal storage containers shall be in accordance with this standard, GB150 and ZBG94004. The product quality classification shall be in accordance with the relevant provisions of ZBG94007.
4.2 The connected glass liquid level gauge and the nozzle shall be on the same vertical plane, and the vertical center line deviation is ±1.0mm. 4.3 For the sugar glass wave surface gauge with a length greater than 1500mm, a fulcrum shall be added in the middle of the liquid level gauge to support it on the head. 4.4 Before carrying out the firing: weld several ear plates on the saddle position (the size and number of the ear plates shall be determined according to the actual firing situation, so as not to affect the firing quality), and then carry out the firing. Weld the ear plate to the saddle plate or use a disassembled saddle. 5 Labels, factory documents, packaging, transportation
5.1 Label content, factory documents, packaging, transportation according to the relevant provisions of Article 6 of ZBG94004, 5.2 All pipe openings are sealed with blind glass plates to avoid magnetic collision. Additional instructions:
This standard is proposed by China National Chemical Equipment Corporation. This standard is under the jurisdiction of the National Technical Committee for Standardization of Glass Equipment. This standard is drafted by the Shanghai Pharmaceutical Design Institute of the State Drug Administration. The main authors of this standard are Ye Wenbang, Li Yijun, and Jiang Yanjun.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.