GB/T 15970.4-2000 Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and application of uniaxially loaded tensile specimens

Basic Information

Standard ID: GB/T 15970.4-2000

Standard Name: Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and application of uniaxially loaded tensile specimens

Chinese Name: 金属和合金的腐蚀应力腐蚀试验第4部分：单轴加载拉伸试样的制备和应用

Standard category:National Standard (GB)

state:in force

Date of Release2000-10-25

Date of Implementation:2001-09-01

standard classification number

Standard ICS number:Metallurgy >> 77.060 Corrosion of Metals

Standard Classification Number:Metallurgy>>Methods for testing physical and chemical properties of metals>>Methods for testing chemical properties of H25 metals

associated standards

Procurement status:idt ISO 7539-4:1989

Publication information

publishing house:China Standards Press

ISBN:155066.1-17468

Publication date:2004-04-10

other information

Release date:2000-10-25

Review date:2004-10-14

Drafting unit:Central Iron and Steel Research Institute

Focal point unit:National Technical Committee on Steel Standardization

Publishing department:State Administration of Quality and Technical Supervision

competent authority:China Iron and Steel Association

Skip to download

Introduction to standards:

This section covers the procedures for designing, preparing and using uniaxially loaded tensile specimens for studying the sensitivity of metals to stress corrosion. Tensile specimens are suitable for testing a wide variety of product forms, including medium and thick plates, bars, wires, sheets and tubes, as well as parts connected by welding, riveting or other means. Slotted specimens can also be used. GB/T 15970.4-2000 Corrosion of metals and alloys - Stress corrosion testing - Part 4: Preparation and application of uniaxially loaded tensile specimens GB/T15970.4-2000 Standard download decompression password: www.bzxz.net