GB/T 39317-2020.General resource of military and civilian-Requirement for data element mapping. ||
tt||1 Scope
GB/T 39317 specifies the mapping requirements for material data elements in military and civilian general resources and military material and equipment data elements.
GB/T 39317 applies to the mapping, information exchange and sharing of material data elements in military and civilian general resources.
2 Normative references
The following documents are essential for the application of this document. For any dated referenced document, only the dated version applies to this document. For any undated referenced document, its latest version (including all amendments) applies to this document.
GB/T 35403.3-2018 National General Specification for Material Coding and Basic Information Part 3: Production Materials
GB/T 37944 Requirements for the Compilation of Data Models for General Military and
Civilian Resources GB/T 37948 Requirements for the Compilation of Data Elements for General Military and Civilian Resources
GB/T 39318-2020 Requirements for Mapping of Identification Codes for General Military and Civilian Resources
GB/T 38992-2020 Classification and Representation of Semantic Relationships between General Military and Civilian Resources
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Reference number
A code or number that uniquely identifies a product within an organization/supplier.
Note: Such as product part number, component number, standard number, specification number, drawing number, internal management code, etc., the length shall not exceed 20 characters.
3.2
Technical attribute data Characteristic data
Data of physical and chemical characteristics inherent in the material itself, which is relatively stable and unchanged.
Note: Such as shape, size, material, strength, function, etc.
3..3
Management attribute data Management data
Information assigned to products by organizations, as well as information about the organization itself.
Note: Management attribute data changes according to management needs, such as address, classification, identification, etc.
4 Abbreviations
The following abbreviations apply to this document.
UNSPSC: United Nations Standard Products and Services Code
This standard specifies the mapping requirements between material data elements in military and civilian common resources and military material and equipment data elements. This standard applies to the mapping, information exchange and sharing of military and civilian common resource material data elements.

ICS35.040
National Standard of the People's Republic of China
GB/T39317—2020
General resource of military and civilian
Requirement for data element mapping
Published on 2020-11-19
State Administration for Market Regulation
Standardization Administration of the People's Republic of China
Published on 2021-06-01
GB/T39317—2020
Foreword
Introduction
Scope
Normative references
Terms and definitions
Abbreviations
Material data element mapping requirements
References
Foreword
This standard was drafted in accordance with the rules given in GB/T1.1-2009 GB/T39317-2020
This standard was proposed and managed by the National Technical Committee for Logistics Management Information Technology Standardization (SAC/TC267). The drafting units of this standard are: China Aviation Comprehensive Technology Research Institute, China Article Numbering Center, China National Institute of Standardization, Academy of Military Science, Legal Research Institute, China Joint Service College of National Defense University of the People's Liberation Army of China, Henan Institute of Standardization, Yantai University The main drafters of this standard: Yang Ying, Liu Xinjian, Dong Hongfei, Li Sucai, Wang Pei, Yang Wenhong, Sun Guangzhi, Liu Zhi, Li Ying, Chen Ting, Han Shuwen, Sun Hongbo, Chen Weilin, Li Jun, Zhang Haiping, Li Chi, Wu Songxia I
GB/T39317—2020
Introduction
This standard is based on the current status of the construction of my country's military and civilian general resource information system, and refers to and draws on relevant standard documents and specifications The formulation of this standard provides a basis for the mapping of material data elements and personnel data elements in my country's military and civilian common resources, promotes the interconnection and intercommunication of common resources between my country's military and civilian sides, and promotes the military-civilian coordination, innovation and integration of related industries. 1 Scope
Military and civilian common resources
Data element mapping requirements
GB/T39317—2020
This standard specifies the mapping requirements for material data elements in military and civilian common resources and military materials and equipment data elements. This standard applies to the mapping, information exchange and sharing of military and civilian common resource material data elements. Normative referenced documents
The following documents are indispensable for the application of this document. For all dated referenced documents, only the dated version applies to this document. For any undated referenced document, its latest version (including all amendments) applies to this document GB/T35403.3-2018 National Material Coding and Basic Information General Specification Part 3: Production Materials GB/T37944 Requirements for the compilation of military and civilian general resource data model 3 Requirements for the compilation of military and civilian general resource data elements
GB/T37948
GB/T39318—2020 Room
Requirements for mapping military and civilian general resource identification codes Military and civilian general resources
GB/T38992—2020
Classification and representation of semantic relationships
Terms and definitions
The following terms and definitions apply to this document. 3.1
Reference numberreferencenumber
Code or number that uniquely identifies a product within an organization/supplier. Note: Such as product part number, component number, standard number, specification number, drawing number, internal management code, etc., the length shall not exceed 20 characters. 3.2
Technical attribute datacharacteristicdataThe physical and chemical property data inherent in the material itself, the data is relatively stable and unchanged. Note: Such as shape, size, material, strength, function, etc. 3.3
managementdata
Management attribute data
Information assigned to the product by the organization, as well as information about the organization itself. Note: Management attribute data varies according to management needs, such as address, classification, identification, etc. 4 Abbreviations
The following abbreviations apply to this document,
UNSPSC: United Nations Standard Products and Services Code 1
GB/T39317—2020
5 Material data element mapping requirements
5.1 Mapping objects
Material data element mapping objects include: civilian material data elements, military and civilian general resource material data elements, military material and equipment data elements, see Figure 1. Civilian material data elements should first be mapped to the data models and data elements established by GB/T37948 and GB/T37944, and then mapped to military material and equipment data elements.
Civilian material
Data element
5.2 Material data composition framework
Military and civilian common resources
Material data element
Figure 1 Military and civilian common resource data element mapping object Military material and equipment
Data element
The base name of military and civilian common resources corresponds to the data model. The military and civilian common resource material data composition framework is shown in Figure 2. The data elements in the data model under the same base name are the complete set of technical attribute data elements, and some data in the complete set are selected to form a subset of the technical attribute data elements of each variety. There are products produced by different manufacturers under one variety. The organization identification code, reference number, and organization detailed data are the management attribute data of the product.
Benchmark name 1
Data model
Data element 1
Data element 2
Data element n
Variety/classification 1
Data element (subset)
Variety/classification 2
Data element (subset)
Product 1/Organization identification code + reference number
Organization detailed data
Product 2/Organization identification code + reference number
Organization detailed data
Benchmark name 2
Data model
Variety/classification
Data element ( Subset)
Figure 2 Material data composition framework
5.3 Basic requirements for material data element mapping
The requirements for mapping are as follows:
Benchmark name n
Data model
Product n/Organization identification code + reference number
Organization detailed data
The mapping of military and civilian common resource material data elements to military material and equipment data elements should be based on military standards, technical parameters, and functional requirements. a)
Based on: The mapping of military and civilian common resource material data elements to military material and equipment data elements should be based on national standards, technical parameters, and functional requirements.
b) Data element mapping should be carried out in the order of material classification, material benchmark name, material variety code, and product. Materials that can be mapped by benchmark name can be mapped by data element. c
Note: The base name can be mapped, which means that the data elements of the first data model have a mapping relationship. The data elements of materials/products with the same GB/T39317-2020
standards, specifications, and drawings can be mapped, and the data elements of materials with the same technical attribute data can be mapped. d)
Material data elements with different technical attribute data cannot be mapped. Note: Some standards and specifications contain general specifications for multiple parts and need to be mapped separately according to specific circumstances. e)
Data elements of materials/products that meet the same functional requirements can be mapped. Note: Material data element mapping refers to the mapping of technical attribute data, and management attribute data cannot be mapped. 5.4 Detailed requirements for material data element mapping
5.4.1 Classification mapping of materials
The classification of military and civilian general resource materials shall comply with the requirements of 5.2 in GB/T35403.3-2018, and use the first 6 digits of UNSPSC. Data element mapping shall be carried out on the basis of classification mapping, and the mapping shall comply with the requirements of 6.2.1 in GB/T39318-2020. The classification mapping of materials (taking gasoline as an example) is shown in Table 1. Table 1
Classification mapping of materials (taking gasoline as an example) UNSPSC
Classification code
UNSPSC classification name
Gasoline
W151015
5.4.2 Base name mapping of materials
Military materials
Classification code
9130
Military materials and equipment
Classification category name
Petroleum-based liquid fuel
Inclusion range
Liquid propellants with a petroleum content of more than 50%, various aviation gasoline, jet fuel, various types and grades of automotive gasoline, bulk liquid propellants, liquid propellants in reusable containers according to predetermined types and quantities
Exclusion range
|tt||Solid propellant (1337 small
class),
Liquid propellant installed in missiles (2845 small
class)
The base name of general military and civilian resource materials shall comply with the requirements of 6.1 in GB/T35403.3-2018, and adopt the sub-category name of UNSPSC. The base name code is 8 digits, which is different from the 5-digit code of the base name of military materials. Data element mapping shall also be carried out on the basis of base name mapping. The mapping shall comply with the requirements of 6.2.2 in GB/T39318-2020. The base name mapping of materials (taking gasoline as an example) is shown in Table 2. Table 2 Mapping of base name of materials (taking gasoline as an example) UNSPSC
Base name code
15101506
5.4.3 Data element mapping of materials
5.4.3.1 Data model comparison
UNSPSC
Base name
Gasoline
Military supplies and equipment
Base name code
11009,
11010Www.bzxZ.net
Military supplies and equipment
Base name
Motor gasoline
Unleaded gasoline
When mapping data elements, first list and compare the data elements of the military and civilian general resource material data model that conforms to GB/T37944 with the military supplies and equipment data model 3
GB/T393172020
. The data elements of military and civilian general resource materials should comply with the requirements of GB/T37948. See Table 3 for the data model comparison of materials (taking gasoline as an example). Table 3 Comparison of data models of materials (taking gasoline as an example) Serial number
General military and civilian resources and materials
Uniform identifier of data element
W0001A000
W0045A000
W0063A000
W0008A000
W0041A000
W0005A000
W0067A000
W0018A000
W0065A000
W0037A000
W0058A000
W0064A000
W0030A000
W0072A000||tt ||W0050A000
W0027A000
W0068A000
W0060A000
W0006A000
W0038A000
W0048A000
W0090A000
(Custom)
Data element name
Benchmark name code
Brand
Common name
Product standard
Density
Vapor pressure
Octane number
Aromatic diameter total
Olefin total
Sulfur total
Actual colloid
Copper sheet corrosion
Net calorific value||t t||Induction period
Lead content
Crystallization point
Color
Water
Freezing point
Quality value
Special properties
Allowed additives
Methanol
Mandatory additives
Methylcyclopentadienyl manganese dicarbonyl
Harmful substances
Iron content
Note: A indicates optional data element, B indicates mandatory data element, 4
Gasoline professional and technical attributes
Military supplies and equipment
Data element unified identifier
M00001
M00002
M00003
M00004
M000 07
M00020
M00017
M00008
M00009
M00010
M00011
M00012
M00013
M00018
M00019
M00 021
(text)
M00006
M00014
M00015
M00016
5.4.3.2 Data element mapping
GB/T39317—2020
For data elements with corresponding data items, data element mapping can be performed item by item. When mapping military and civilian common resource material data elements to military material and equipment data elements, not only the data element identifiers should be converted, but also the data code table and code values ??should be converted according to the corresponding code table and code values ??of the military material and equipment data elements. The same treatment is applied when the military material and equipment data elements are mapped to the military and civilian common resource material data elements. Mandatory data elements should be mapped item by item. For mapping when the names of military and civilian common resource data elements are different from those of military supplies data elements, the mapping relationship between data elements should be analyzed from the aspects of equivalence, hierarchy and relevance according to the requirements of 7.2, 7.3 and 7.4 of GB/T38992-2020. Example: For data elements with serial numbers 1 to 15 in Table 3, there is a one-to-one correspondence between the military and civilian common resource and material data elements and the military supplies and equipment data elements, and data elements can be mapped item by item.
5.4.3.3 Data element integration mapping
When mapping, for data elements that do not have corresponding data items in the target data model, several data elements can be integrated and mapped as "text" or "custom" data elements of the target data model. Example 1:
For data elements with sequence numbers 16 to 21 in Table 3, there is no corresponding data item in the military supplies and equipment data element. When the military and civilian common resources and materials data element is mapped to the military supplies and equipment data element, the data elements with sequence numbers 16 to 21 can be integrated as text and mapped to the "text" data element M00021 of military supplies. Example 2:
For data elements with sequence numbers 22 to 25 in Table 3, there is no corresponding data item in the military and civilian common resources and materials data element. When the military supplies and equipment data element is mapped to the military and civilian common resources and materials data element, the data elements with sequence numbers 22 to 25 can be integrated as text and mapped to the "custom" data element W0090A000 of the military and civilian common resources and materials data element.
5.4.3.4 Direct reference
When mapping, for the mandatory data elements in the target data model, in addition to mapping according to the mode of 5.4.3.3, the data elements in the target data model can also be directly referenced by adding new data elements and data can be directly collected according to its requirements. Example 1:
For the mandatory data elements with sequence numbers 16, 20, and 21 in Table 3, there is no corresponding data item in the military supplies and equipment data element. When the military and civilian common resources and materials data element is mapped to the military supplies and equipment data element, the military and civilian common resources and materials data element can be referenced by adding the corresponding military supplies and equipment data element. Example 2:
For the mandatory data element with sequence number 22 in Table 3, there is no corresponding data item in the military and civilian common resources and materials data element. When the military supplies and equipment data element is mapped to the military and civilian common resources and materials data element, the cataloging data element of military supplies and equipment can be referenced by adding the corresponding military and civilian common resources and materials data element. 5.4.3.5 Data element value collection requirements
When collecting data element values, the following requirements should be followed: a) According to the data model corresponding to the benchmark name, analyze the data element and collect data according to the mapped data element requirements. Note 1: The same type of materials can only be compared based on the same data model to determine whether they can be regarded as the same variety. If there are only data elements, the values ??of the data elements are the same, but the data models are different, mapping errors may occur. For example, forklifts and forklifts have the same data elements in the data model, but the forklift data element cannot be mapped to the forklift data element.
Note 2: Different products have different attribute data and different models; even if the models are the same, the specific data items may be different. There are required data elements and optional data elements. Specific model data items can be tailored, such as hexagonal bolts of different sizes use the same data model. The technical attributes correspond to the types of materials, and the management attributes correspond to the organizations/suppliers and products; the management attributes and technical attributes are listed separately b)
, that is, the name, address, telephone number, email, etc. of the organization are not considered as technical attribute data of the types and should not be confused with the technical attributes; the management attribute data such as the product reference number and manufacturer are not considered as technical attribute data of the material types to ensure the consistency of the technical attribute data element mapping.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.