GB 16194-1996 Hygienic standard for welding fume in workshop air
Basic Information
Standard ID:
GB 16194-1996
Standard Name: Hygienic standard for welding fume in workshop air
Chinese Name:
车间空气中电焊烟尘卫生标准
Standard category:National Standard (GB)
state:in force
Date of Release1996-04-03
Date of Implementation:1996-09-01
standard classification number
Standard ICS number:Environmental protection, health and safety>>Air quality>>13.040.30 Air quality in the workplace
Standard Classification Number:Medicine, Health, Labor Protection>>Health>>C52 Labor Hygiene
associated standards
Publication information
other information
Release date:1996-04-03
Review date:2004-10-14
Drafting unit:Institute of Labor Health, Chinese Academy of Preventive Medicine
Focal point unit:Ministry of Health
Publishing department:State Administration of Technical Supervision Ministry of Health of the People's Republic of China
competent authority:Ministry of Health
Introduction to standards:
This standard specifies the maximum permissible concentration of welding smoke in workshop air and its monitoring and inspection methods. This standard is applicable to all types of enterprises that carry out welding operations. GB 16194-1996 Hygienic standard for welding smoke in workshop air GB16194-1996 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Health standard for welding fume in the air of the workplacebzxz.net
1. Subject content and scope of application
This standard specifies the maximum permissible concentration of welding fume in the air of the workplace and its monitoring and inspection methods. This standard applies to all types of enterprises that carry out welding operations. 2 Reference standards
GB5748 Determination of dust in workplace air 3 Hygienic requirements
The maximum permissible concentration of welding fume in the air of the workplace is 6mg/m3. GB16194-1996
Other harmful substances generated during welding shall still be implemented in accordance with the current health standards for these poisons. 4 Monitoring and inspection methods
The determination of welding fume concentration and free silicon dioxide content in the air of the workplace shall be implemented in accordance with GB5748. 5 Supervision and implementation
Health administrative departments at all levels are responsible for supervising the implementation of this standard. Additional Notes:
This standard was proposed by the Ministry of Health of the People's Republic of China. This standard was drafted by the Institute of Labor Hygiene and Occupational Diseases, Chinese Academy of Preventive Medicine, and Gansu Provincial Health and Epidemic Prevention Station. The main drafters of this standard are Zou Changqi and Li Jiuju. This standard is interpreted by the Institute of Labor Hygiene and Occupational Diseases, Chinese Academy of Preventive Medicine, the technical unit entrusted by the Ministry of Health. Approved by the State Bureau of Technical Supervision on April 3, 1996, and implemented on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.