This standard specifies the classification method of printing ink products, which is applicable to the production and use departments to classify or judge the categories of printing ink products and their differences, so as to achieve the purpose of product management serialization. QB/T 3597-1999 Classification, naming and model of printing ink products QB/T3597-1999 Standard download decompression password: www.bzxz.net
This standard specifies the classification method of printing ink products, which is applicable to the production and use departments to classify or judge the categories of printing ink products and their differences, so as to achieve the purpose of product management serialization.

Classification number: 417
Light Industry Standard of the People's Republic of China
QB/T 3597-1999
Replaces 2BA17005-1987
Classification, naming and model of printing ink products 1999-04-21 Issued by
State Bureau of Light Industry
1999-04-21 Implementation
QB/T3597--1999
This standard is the professional standard BA17005-1988, which was issued by the State Light Industry Bureau (No. 199112) and transferred to QB/T3597-1909, with the same content. This standard was proposed by the State Light Industry Administration and the National Oil Tightness Standardization Technical Group. This standard was initiated by Haichi Factory.
Main drafters of this standard: Yu Zhiwu, Fang Anguo. From the date of implementation of this standard, the professional standard issued by the Ministry of Light Industry can be used as a warning. BA17005-1987 Classification, naming and model of printing ink products?
Light Industry Standard of the People's Republic of China
Classification, naming and model of printing ink products QB/T3597-1999
Date 17005-
This standard specifies the classification method of printing ink products, and is applicable to the classification of production and use departments or the classification of printing products and the difference between them. The classification of printing ink products is based on the type of printing ink and the type of oil. The classification is shown in Table 1. 1.
Table 1 Classification of printing ink products
Note to the tenth edition||tt| |White transfer ink
Two included constant notes
Special oil type
2 naming
Oil name protection
Can print competitive light reverse fee
War light grid printing instrument axis quantity
Oil product category
Acid urea support oil offset rotary quantity
Dog protection board oil fee Han bed hot oil quantity
Four color consumption
Flat rice shooting oil slow
Grade protection oil
Water type injection
Shadow guide version has not reached the oil boundary
Wave type writing oil more
Pregnancy total oiler
Strict version plastic
Must type with writing oil Wu network plastic hydraulic screen injection crystal oil||tt ||Ink name = printing type, variety, package 2.2 Color naming rules
Ink color: chlorine color, one color, orange color, flower color, glass road island
Marking decision is
2.3 Runmengyi’s name is still the name commonly used in my country, for example: lead printing, offset printing, writing, screen, marking, cancellation, photowriting, etc.: as shown in Table 3, 2.4 Printing auxiliary system service principle
2.4.1 Special auxiliary agents and similar oils are marked and named, 2.4.2 General auxiliary agents = English number → use one million color. 3 Model
3.1 In order to distinguish various independent walls and clarify some characteristics, there must be a model before the name. The 32nd stamp number of the oil-marking plate is composed of a Hannu alphabet and five Arabic numerals, among which the Chinese characters indicate the pre-printing version number, and is located in front of the model number QB/T35971999 approved by the National Bureau of Light Industry on April 21, 1999 and implemented on April 21, 1999. Among the Arabic numerals, the first and second digits indicate the ink type, performance, etc. The third digit indicates the color of the ink. The third and fourth digits together indicate the color of the oil. The fifth digit indicates the serial number of the flower package, and its meaning is as follows: The printing family's products are shown in Table 2, and the wet oil variety, characteristics, and moisturizing properties are shown in Table 2. The color is bright before the color is bright. The printing version is specially designed for the new generation of products. 3.2.2 The oil variety code ranges from 01 to 93, and the point table 3: The product code of the product ranges from 01 to 93, and the long printing light department is shown in Table 3: The product is specially designed for the new generation of products. Do not absorb iron printing net
: Flat printing linkage quantity
: Pre-ball version dynamic ticket
Cavity printing hot setting oil quantity
: Lead E book oil slow
Set whitening device
Convex rice rotary·Book oil ticket
Letterpress rotary printing newspaper consumption quantity
Leather plastic oil wet
Suspended writing version to type oil map
Writing steam type oil wet
3.2.3 The background color is shown in Table 1:
Oil color
Oil type
Printing type
Semi-finished type
Sensitive oil pad
Akong crude oil
Special painting
Oil test products and
Photographic plate oiler
Natural plastic oil area||tt| |Consumer color generation
General oil gold (risk type)
Interactive ink (water type)
Screen material
Screen drop amount
Quick oil removal
Limb material movement
Copy welcome
Some fat oil
Machine oil
System cleaner
Oil egg acid color
3.2.4 The color hue of the ink is shown in Table 5: No.
Ink color hue
Flake yellow
Liquid (Technical Release
Kong Provincial Medicalwww.bzxz.net
QH/T3597--1999
Table 5 Oil color hue code
Temperature period hue
Rose spot
3.2.5 Ink product code indicates the same There are several color packages suitable for different needs of different products. 3. The number of the general auxiliary agent is composed of a high-order character and a low-order number. The code is "the first and second digits represent the characteristics, use, composition, etc. of the auxiliary agent. The third digit represents the color of the auxiliary agent, which is used to distinguish the different types of auxiliary agents. 3.3.1 The characteristics of the general auxiliary agent, the use, composition, etc. are shown in Table 6. The color represents the auxiliary agent's special characteristics, use, etc. 3.4 Model name
As3631
W60801
4 Yu Ming Handshake
Offset Printing Competition Light Plate Type
Glue Car Tree Index
Lu Edition Printing Limiter
Four Edition Whole Material God Model Red Type
General Writing Black Secretion [Oil Type]
Concentric Black Oil
Oil Thinner
Auxiliary Oxygen Characteristics, Sichuan Gold
Detackifying
Positive F Agent
4.1 The single varieties that have been approved for production, when they need to be serially guided, shall be produced by the pumping machine! When applying for the national oil standardization technology, the product must be approved for review. The product must be approved for review. The technical plan includes the composition characteristics and use of the product, the production process;,
b, the product technical indicators and inspection methods!
sProduct inspection data:
Q8T3597--1989
Small products are lighter or more practical than the standards of similar products at home and abroad. 4.2 Review (organize relevant people to discuss if necessary) and notify the unit of the unified model name and report it to the Ministry of Light Industry and the Bureau of Chemical Industry for the case.
The naming procedures for inks that have been normally produced are the same as above.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.