This standard specifies the types and basic parameters of single-stage double-suction clean water centrifugal pumps. JB/T 1050-1993 Single-stage double-suction clean water centrifugal pump types and basic parameters JB/T1050-1993 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T1050-93
Single-stage double-suction clean water centrifugal pump
Type and basic parameters
1993-07-13 Issued
Ministry of Machinery Industry of the People's Republic of China
1994-07-01 Implementation
Mechanical Industry Standard of the People's Republic of China
Single-stage double-suction clean water centrifugal pump
Type and basic parameters
1 Subject content and scope of application
This standard specifies the type and basic parameters of single-stage double-suction clean water centrifugal pump (hereinafter referred to as pump). JB/T1050-93
This standard is applicable to pumps that transport clean water or other liquids with physical and chemical properties similar to water, and the temperature of the transported liquid is not higher than 80c.
2 Reference standards
GB5658
GB/T13006
GB/T13007
3 Types and basic parameters
3.1 Structural type
Technical conditions for single-stage double-suction centrifugal water pumps
Centrifugal pumps, mixed-flow pumps and axial-flow pumps NPSH centrifugal ticket efficiency
The pump is a single-stage double-suction horizontal type. The casing is a horizontal split type. 3.2 Basic parameters
3.2.1 The basic parameters of the pump shall comply with the provisions of Table 1. The parameters of the pump under reduced speed conditions are shown in Table 2. The values ​​listed in the table are the performance at the specified point. The performance operating range of the pump is shown in Figures 1 and 2. 3.2.2 The efficiency of the pump shall comply with the provisions of GB/T13007. 3.2.3 The NPSH of the pump shall comply with the provisions of GB/T13006. 3.2.4 The performance inspection and deviation of the pump shall comply with the provisions of GB5658. 3.3 Model designation method
3.3.1S-type pump
Code for small impeller diameter (indicated by A, B..., normal impeller diameter is not indicated) Head, m
Single-stage double-suction clean water centrifugal pump (from the drive end, the pump rotates clockwise) Inlet diameter, mm
Example: The model of a single-stage double-suction clean water centrifugal pump with an inlet diameter of 300mm, a head of 32m and a normal impeller diameter is 300S32. 3.3.2Sh-type pump
Ministry of Machinery Industry 1993 -07-13 approved
1994-07-01 implemented
JB/T1050-93
Code for minimizing impeller diameter (indicated by A and B, normal impeller diameter is not indicated) Field range, m
Single-stage double-suction clean water centrifugal pump (from the drive end, the pump rotates counterclockwise) Suction port diameter, mm
Example: The model of the single-stage double-suction clean water centrifugal pump with a suction port diameter of 250mm, a head of 54m, and an impeller diameter that has been minimised for the first time is 250Sh54A.
Pump Model
150S50
150Sh50
150S78
150Sh78
200S42
200Sh42
200S63
200Sh63
200S95
200Sh95
250S14
250Sh14
250S24
250Sh24
250S39
250Sh39
250S65||tt ||250Sh65
300S12
300Sh12
300S19
300Sh19
300S32
300Sh32
300Sh58
300S90
300Sh90
350S16
350Sh16
350S26
350Sh26
350S44
350Sh44
Lift H
Speed ​​n
Specific speed n.
Type number K
Pump model
350S75
350Sh75
350S125
350Sh125
500S13
500Sh13
500S22
500Sh22
50 0S35 | | tt | S47| |tt||600Sh47
600S75
600Sh75
600S100
800S22
800S32
800S47
800S76
1000S22| |tt|| 1000S31
1000S46
1200S24
1200Sh24
1200S35
1400S15
1400S22
1400530
JB/T1050-93
Continued Table 1||tt| |Lift H
Speed ​​n
Specific speed,
Type number K
Ticket number
350S26
350Sh26
350S44
350Sh44
350S75
350Sh75
350S125
350Sh125
500S22
500Sh22
500S35
500Sh35bzxz.net
500S59
500Sh59
500S98
500Sh98
600S22|| tt ||600Sh22
600S32
600Sh32
600S47
600Sh47
600S75
600Sh75
600S100
800S22
800S32||tt| |800 Sh32 | |tt | ||JB/T 105093
Head H
Specific speed n
Type number K
JB/T1050—93
000100000000
JB/T1050-93
DnSh47
0001C06
Additional remarks:
This standard is proposed by the Ministry of Machinery Industry.
This standard is under the jurisdiction of Shenyang Pump Research Institute. This standard is drafted by Shenyang Pump Research Institute. The main drafters of this standard are Han Zhongbao and Zhang Lifu. JB/T1050-93
From the date of implementation of this standard, the original JB1050-84 "General single-stage double-suction centrifugal pump types and basic parameters" will be invalid. People's Republic of China
Mechanical Industry Standard
Single-stage double-suction clean water centrifugal pump
Type and basic parameters
JB/T1050~93
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (P.O. Box 8144, Beijing
Zip Code 100081)
Copyright reserved
Reproduction prohibited
Format 880×12301/16
Printing sheet 3/4 Number of words 12,000
First edition in January 1994
First printing in January 1994
Print number 00,001-500
Price 6.00 yuan
No. 1478
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.