Some standard content:
ICS13.310
National Standard of the People's Republic of China
GB/T20206-—2006
Technical specification of banking seal verification system
Technical specification of banking seal verification system2005-05-24Promulgated
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
Implementation on October 1, 2006
GH/T20206-2006
Normative references
Terms and definitions
4Requirements
Typical verification printing room
Preparation of standard seal space
Electronic standard seal database
Preparation of seal signature
Cheng Xiao Item performance
4.7 Seal network
5 Level assessment source
Recording equipment
5.2 Source receipt
6 System test
6.1 Test preparation
6.2 Test review
7 Test report and other evaluation formats
7.1 Basic information
7.2 Banking seal technology
Test equipment test report and evaluation
1.3 Banking seal verification system
System software Document delivery report and other class evaluation (see Appendix C banking industry ink inspection system camera equipment test report and grade evaluation open scene AC informative appendix)
Appendix B informative appendix)
Banking industry printing reception system scanning recording equipment test report and other equipment evaluation chapter C informative time record)
Industry printing inspection system system burning software re-test report and other equipment evaluation Figure 1
Seal Tao schematic structure (central machine-wide network-model verification service terminal) Figure 2 Printer network structure (central machine-wide network node machine-load network-verification terminal) Table 1
Performance indicators of video recording equipment
Performance indicators of scanning and entry equipment
Performance indicators of seal recognition
Table 4 Anti-interference recognition performance indicators
Table 5 System components performance indicators
Table 6 Seal network performance indicators
Table A.1 Performance indicator evaluation table of video recording equipment
Performance indicator evaluation table of scanning and entry equipment
Performance indicator evaluation table of system components
Seal network performance indicators
Table A.1 Performance indicator evaluation table of video recording equipment
Performance indicator evaluation table of system components
Seal network performance indicators
Appendix A, Appendix B and Appendix C of this standard are informative appendices. This standard is proposed by the State Administration of Standardization and is drafted by the National Anti-counterfeiting Standardization Technical Committee (SAC/TC218). The main drafters of this standard are: Huan Huiyong, Liu Jinliang, Mei Qiong, etc. This standard is first formulated.
GE/T20205-—2006
GB/T202062006
0, 11995 (The People's Republic of China Bills Law) Chapter 1 Article 1 and Article 7 clearly stipulate that in order to standardize bills and safeguard the legitimate rights and interests of the parties in bill activities, maintain economic order, and promote the development of social main market economy, this law is formulated, and "the signature and seal on the bill are signatures, stamps or signatures plus signatures." Therefore, in domestic economic and circulation cities, stamps and signatures are convenient bill settlement funds. The only legal payment order of the customer, influenced by the traditional Chinese culture, domestic bill settlement is mainly in the form of stamps.
0.2 With the development of China's economy, the business volume of banks has increased, and the amount of bills processed is getting bigger and bigger. In terms of judging the authenticity of the bills to be tested, the traditional method of checking the seal is that the bank counter folds the corner of the bill to be tested, and manually locates the corresponding position of the reserved seal on the corner line, and then completes the comparison by visual inspection. This method leads to problems such as inconsistent verification standards, low verification accuracy, and difficulty in ensuring verification quality. Once used, it will bring great economic and trust problems to banks and customers. In terms of the proper use and storage of customer seal cards, there is a lack of safe, convenient and standardized management methods. At the same time, the verification speed is slow, the reserved seal cards are difficult to transmit, and the authenticity of bills in different places is very difficult to distinguish. The difficulty in obtaining documents and the inability to conduct deposits and withdrawals for public business have seriously restricted the development of bank business. With the rapid development of science and technology, the computer automatic comparison technology of the whole stack verification has been produced, which has greatly improved the safety of the seal model and effectively prevented the occurrence of criminal cases. It has greatly improved the work efficiency and optimized the electronic management method of the reserved seal card! The network off-site verification of the special seal of the bill has been realized, making it possible to conduct deposits and withdrawals for public business. The release of this standard will help to use scientific and effective management methods, standardize the market of verification technology, set the design standards, production specifications and system performance indicators of enterprises, improve and ensure the quality of verification technology, meet user needs, and facilitate insurance companies to determine the insurance premium rate of the seal verification system product liability insurance, and provide a strong technical guarantee for the effective implementation of the (Law of the People's Republic of China on Bills of Exchange).
Technical Specifications for Banking Seal Verification System
GBT20206--2006
This standard specifies the requirements for the special terms, system functions, technical performance, software testing methods, test result summary and other aspects of the banking seal verification system. This standard applies to the design, component production, software development, technical index testing, installation evaluation and application of the banking seal verification system; it can also be applied to the technical index testing and other evaluation of the in-use seal verification equipment in the machine industry; 2 Normative Reference Documents
The clauses in the following documents become the clauses of this standard through reference in this standard. For dated reference documents, all subsequent amendments (excluding errors) or revisions are not applicable to this standard. The parties to the agreement on whether this standard can use the latest version of the document shall apply. For undated reference documents, the latest version shall apply to this standard. GB/T15876-1994 Information Processing System Inter-system Information Handover DTE/DCE Interface Signal Quality of Network Data Transmission CID1509543:19891
GB/T17142-1997 Information Technology
Open Systems Interconnection Management Practice D1S0/1EC100:1992) 3 Terms and DefinitionsbzxZ.net
The following terms and definitions are used in this standard:
that is, a seal
with an original stamp on a white card, 3.2
standard seal
standard seal refers to a seal on a white card, reserved for use, which is called a seal card by the bank, and is the standard and basis for verifying the imprint room,
electronic standard seal image uses image acquisition to extract the entire image of each document that is difficult to print. After computer processing, it is converted into an electronic image for storage. An electronic national standard seal is used to verify the seal to be tested. The above process is "modeling". The seal to be tested is tested on the bill and is waiting to be confirmed whether it is the same as the standard seal. 3.5. Image separation uses a special algorithm to select the best image separation method. 3.6. Separation of national seals under complex backgrounds ImageDetectLoaFromComplexBackground uses a special algorithm to separate the image of the seal to be tested from the image of the most serious interference. 1
GB/T202062006
Registration
The image of the seal to be tested is overlapped and matched with the electronic standard seal. 3.8
The equipment for copying cquipmenl
The equipment for collecting the seal image, including: camera, scanner and image sorter, etc. 3.9
Recognition rate When verifying a seal to be tested, it can give the percentage of correct identification results in the whole of the seal to be tested. This example value is 3.10
Real seal recognition rate (real seal recognition rate) realseal recognition rate is the percentage of the number of "correct" seals that can be correctly judged in a batch of seals to be tested in the real seal test.
Image seal recognition rate takeseal recognitian rate is the percentage of the number of "wrong" seals that can be correctly judged in a batch of seals to be tested in the real seal test.
Test seal image positioning testing seal image position locating Technical method for checking the image of the test seal that is most consistent with the specified electronic standard seal in the bill image: 3. 13
Equipment quality
equlpment coslency
The process of collecting a standard seal image by multiple similar recording devices. 3.14
compresslossless
The compressed file opened by the decompression algorithm is kept consistent with the information data before compression. 3.15
compresslossless rate
lossless compression rate
The percentage value of the lossless compression rate before compression. It can also be specified in multiples. 3.16
Electronic standard seal databasedigital standard scal imagedatabiseThe electronic standard seal difference data set after lossless compression. 3.17
Network transmission management center for electronic standard seals (servercompterTerdieitalstandardsraltrans-mission (cester site)
A computer that manages the network transmission of electronic standard seals and other digital information, and completes the collection and distribution and transmission of electronic standard seal information established in different locations
Network transmission management node for electronic standard seals (clientcomputer fordigital standard seal irans-mission (node site)
A computer that uploads local or receives remote electronic standard seal information according to the control commands of the central management program. 4.1 Recommended printing styles: square, rectangular, shaped and outlined seals. 4.2 Standard printing and finishing specifications: GH/T20206-2005. 4.2.1 The sample values of low-quality printed cards are R2-240, G2240, B240. The density of low-quality cards is between 120g and 150g. The surface of the card is smooth and does not reflect. 4.2.2 Standard printing red masking example value, 102R5255.05G204.05B6204.R-G250.G-B20, 4.2.3 Standard printing zero-system meal, use red and print the stamps to ensure the standard printing smoothness. Please write and stamp on the printing card to ensure the standard printing smoothness. Please keep a slight worry about the background.
, the intensity of the rainbow color, the fullness of the green color, and the blue color 4.3 Electronic standard seal database is formed according to the rules of 4.5.2. By using cameras, scanners and image sorting machines and other recording equipment, the standard seal images are accurately captured. After computer processing, they are converted into electronic standard seals in color image format. The lossless compression algorithm is used to compress the wax to form the electronic standard seal data. 4.4 Special seal testing department 4.4, 1 Requirements: As a type of seal, there are various complex background interferences, including color handprints, frame lines, strips and patterns, etc. 4.4.2 Requirements for seal testing According to the characteristics of banking customers' seals, there are differences in the printing process, uneven seal application, changes in fixation, deformation of the seal, wear deformation after long-term use, and seals produced after objects stand on the seal. The preparation of Bozhou seal has the above characteristics. 4.43 Preparation of duplicate seal Carefully examine the specific situation of the physical bills, use bills with various background interferences, simulate various stamping techniques, various stamping environments, simulate various stamp deformations, and make the test seals. 4.5 Equipment
4.5.1 Computer equipment
Computer equipment covered by this standard includes computer, node and central computer. The operating capacity of the selected PC as server should meet the requirements of system software performance indicators 4.6 and 7, and take into account the user's experience indicators. 4.5.2 Scene equipment
4.5.2.1 Scene equipment should complete the image capture of standard seal sets and duplicate seals. Video recording equipment or code recording or scanning recording equipment (scanner or image sorter) can be used. Color image mode is used to ensure the accuracy of positive photography. 4.5.2.2 Recording equipment should meet the requirements of system performance indicators. Multiple network recording equipment should be designed. The authentic seal of the equipment passes the test, ensuring that the deformation degree of the seal image collected by the recording equipment and the equipment consistency indicators are within the specified range. 4.5.2.3 The anti-machine fatigue and anti-machine wear performance indicators of the scanning equipment must ensure that after scanning 60,000 bills, the deformation degree of the collected seal image is within the allowable range. 4.5.2.4 The performance indicators of the image recording equipment are improved. Table 1 1
The performance indicators of the domestic recording equipment
The maximum error of the authentic seal of 10 recording equipment passing the car
Simulation test (S running connection)
The report signal is connected
CB/T 20206-2006
Recording equipment consistency
True print through device
Table (continued)
Calibration equipment sequence guide
Recording equipment set the maximum value of each true print child activity car refers to the percentage difference between the maximum value and the minimum value of the true child through the car. The use of the CD setting accuracy is 0. When the installation is more frequent, the effective data is guaranteed according to 4.5.2.4.1
The fast situation of the European figure becomes 30ODPI
When the equipment is in the environment, the installation distance is free of auxiliary guarantee. The effective grasp of the late national situation is issued by 45242
225ODPL
Scanning recording Equipment performance indicators are shown in Table 2
Table 2 Scanning and input equipment performance indicators
Scanning background
Single-sheet scanner
DPIK color
o Intelligent equipment printing device The maximum adjustment required for a single scanner in different use periods
Recording equipment preparation
Printing equipment dynamic injection molding machine
Guangxi test equipment production number
And the maximum parallax of the printing equipment through the adjustment of the maximum and minimum values of the printing machine The ratio of the maximum and minimum values of the printing machine to the wear and tear of the machine board
Special quality after long use
Printing medical communication Pass the test
4.6 System performance
New stock preparation
Single scanning equipment is not idle for a period of time
20,000 floors
The single scanning machine can be used at different times. The error rate of the true seal customer passing the test refers to the percentage between the maximum and minimum total error rate of the true seal customer passing the test. This example value
The system functions are in line with the requirements of GB/T1712-1997. The performance indicators of the industry seal inspection system include, the seal recognition rate, the true seal pass rate, the anti-backwardness and excellent ability, the number of database retrieval speed, the speed of the single seal receipt and verification, the number of auxiliary verification comparison methods, etc. 4.6.1 Verification
Seal The system converts the seal to be tested into image information that can be compared with the electronic standard seal, and compares whether the two are identical. And recognize the duplicate seal quickly
4.6.1.1 Positioning: From the multiple duplicate seals on the bill, correctly extract the seal image to be tested that is closest to the electronic standard seal feature. 4.6.1.2 Image separation: separate the special seal image from the interference image. 46.1.3 Registration: align the special seal image with the electronic standard seal in the 360-degree image. 46.14 Based on the characteristics of the pen spacing, shape and relative position in the electronic standard seal, comprehensively compare the seal image to be tested: and give the recognition result of the difference between the seals to be tested. 46.2 The security of the printing room verification system is suitable for identifying all kinds of scanned, engraved, forged and stamped seals, etc. The performance indicators of the printing recognition are shown in Table 3.
Table 3 Performance indicators of slow printing recognition
Performance (300bP)
Stroke accuracy (point, surface, room, batch, Sa)
GB/T20206-2006
Note 1, this standard is based on the definition of the true quantity of the new printing image, such as the final difference in the bank seal is defined as a single image index, of which the difference of 2 pixels may be caused by the customer's use of the seal, and the real recognition error is only 1 image index. The reading needs to be understood through the production process of the advanced play, and the bank customer's intention is to seek innovation and provide the bill. Note 2, the new character code is the quality of the angle, direction and constant position. Note 3: The equivalent geometric length of each ten-character seal unit of 300DP1 is 00046mm. 4.6.3 The seal verification system can identify false seals and ensure a high pass rate of genuine seals in the case of narrow field interference. The anti-interference and anti-adjustment performance indicators are shown in Table 4.
Table 4 Anti-interference and identification performance index
Qing Da Gan Wu Yuan
Ping Yu Precision Appropriate to the percentage of seal demand Li Qing Xin Si % Shoulder field Multi-school seal signature dry courtyard
【The most store includes useless seals)
Seal energy deep Huang virtual| |tt||(Lost seal treasure letter)
Zhongzhengxin you even reduced Kang
Yujian directly got a heavy post)
Seal home empty color friction
(Yes, use force to select the dynamic color of blue luck) Heterogeneous trunk line
Color interference
Based on the SOGDPI image accuracy, the pen west sheep expands or ends within 2 pixels, the first surface two-way expansion fee is within the law
Quantity E0≤R204.120GC255.0≤B<204.C-R250.RB<20 #Package 0≤R≤204.0G<204.120C8C255.B-R250.IG-RI≤20M Color 0CRC204.0CG<804.0≤B≤201.IG-B20.1G-R20 Yellow R215.G2245.0S204
Cable package R≥204.51≤GG153.B2245
Cyan R1530153.204+1RB≤20
Red envelope 1025R253.0G<204. 0≤B620H.R-B250.R-Ga50.C-B220
#电204R255.101≤G104.B10
In the evening, the above background information can be displayed in one image at the same time. 4.6.4 Please check the technical method
In the verification process, due to various reasons, the system cannot give a good result for some of the tested prints, including real prints and fear prints. The system provides a variety of auxiliary verification comparison methods to facilitate workers to judge the authenticity of the prints. Such as human corner, jitter, rectangle, empty space, rotation, round cover, new corner, border, same screen, three colors, etc., GB/T202062006
4.65 Daily benefit direct inquiry
4.65.1 Save the detailed log of the special test seal verification situation, including: verification personnel, verification time, verification location, verification machine feature number, voucher number, amount, bill image) verified seal image to be tested, verification results, etc. 4.6.5.2 Save the detailed adjustment log of the electronic standard seal database, including: operation personnel, operation time, operation location, customer model number, addition, deletion, seal change, information modification information, additional notes, etc. 4.6.5.3 Have the ability to query the relevant information of the electronic standard seal database, 4.6.6, Electronic standard print database
4.6.6.1 Seal image compression method
The image compression method must use lossless compression technology to prevent the electronic seal from being deformed when the document is compressed and opened, to ensure the authenticity and uniqueness of the electronic seal in the print, and to avoid the image deformation affecting the comparison quality during the comparison process. The formula for calculating the compression multiplication is: the number of leading digits of the seal/the number of leading digits of the seal=(standard seal diameter mm/25.4mm×collected image resolution DPD*/84.6.6. 2 The volume of the electronic standard printing database is greater than 1 million seal storage units (households). 4.6.6.3 When the electronic standard printing database stores 300,000 households, the number of electronic standard printing selections can be searched and retrieved by number. 4.6.6.4 The electronic standard printing database contains camera recording equipment, scanners and image sorting machines for printing case verification processing. 4.6.7 System software performance indicators are shown in Table 5. 5 System transfer performance indicators t||batch back quantity dry resistance risk matching force
resistance education is dry machine continuous mold cotton force
no pressure end multiple
number food library search continuity
single school will scrape the whole machine risk continuity
Korea's verification comparison number
device create printing gold nuclear whole day table
number library operation log
square book, rectangular class
circular. National shape
automatic city remove background
description work test model printing rich knowledge to rich used the most chapter again prepare the most brushed true quantity chapter training and points city second floor
manually clear all scenes
description 2: automatic timing function mainly timing your system mouth Fingerprint night photography, for a more special country to print to the network time for inspection, three
no clear
instructions from the printing treasure only to Feng one standard index is set as 9 your driving - electronic engraving system scanning data voice engraving children the average error is 3 ten families, but the window field out of the United States process small process printing signature instructions 4, the test real seal through the management of luck and direct positioning used by the ticket grip dry generation process seat are two send thousands of interference or less, instructions 5 brush test load education recording dry find the age of the used ticket dry batch degree for various interference evenly divided cities, instructions 6: the system wants to use, there is a thousand find the printing guest card to build the hidden power, 4.7 printing network structure
4.7.1 printing fee network structure
GB/T20206—2006
The seal network is composed of a central machine and a verification terminal connected through a wide area network to meet the network transmission of the electronic standard printing room, so as to achieve the day of remote verification of the seal to be tested. The main seal network structures are the following two types, the transmission mode without independent node machine (node machine and verification integration mode) and the transmission mode with node machine, see Figure 1 and Figure 2 for details. Transmission mode without independent node machine
Decryption cabinet service host
World chapter printing
Road generation use
Hotspot bottle
Road intermediate device
Road product device
Road product broadcast supervision center||t t||Service network
CaS.DDN.Old R.Special line
Mei#PCO
Good physical energy right good
Use to create security equipment
Root acid crystal
Node machine transmission auxiliary mode
Social profit printing
Business card verification management
Business point card
Leave the topic
Verification spray
Fu insurance device
Zhengbao military medical high
Guijingchang
Zhengli aggregate government affairs
National verification ear management
Seal network structure (central computer-wide area network-verification terminal) service business host||tt| |Tongluoge monitoring management center
Bank network
X.25.DON.Main business special
Router
Beiye network product medical
(node machine)
Model face PC
Abao fruit product hard person
Winning risk device barrier
Constant brain C machine
Yang Changrong material experience
Precision number explosion wall
Route output device
Business outlet business machine
EA machine】
Yang Yinglian # service
Taoyan final edition
Guo Changle collection beverage preparation
Guiyan roasting road
Figure 2 seal network Network structure Central machine - WAN - Node machine - High-speed terminal
GB/T20206-2006
4.7.2 Security of central machine
The central machine adopts dual-machine hot standby and cold standby operation mode to absolutely ensure the data integrity and reliability of the electronic standard printing database. 4.7.3 Operation system
According to GB/T15276-1994, the node machine and central machine can use Linux, Unix or Windows operating system.
4.7.4 Network compatibility
Support the bank's existing network mode and network equipment 4.7.5 Operation management mode
The network management mode of the electronic standard seal database can be: centralized and unified management mode of the center, centralized management mode of the node machine and the center machine.
4.7.6 Modeling management mode
The electronic standard seal database can be managed in a centralized and unified manner, or centralized management mode of the node machine and the center machine. 4.7.7 Transmission management
Support the transmission of electronic standard seal data to the network or the city network, and update the data automatically or manually. The electronic standard seal data information in the input must have encryption function. 4.7.8 Network anti-power failure recovery capability
When the network is in working state, when the center machine and the node machine fail, In case of network interruption, loss of seal room information in the electronic standard seal database, etc., the system must have network disaster recovery capabilities to ensure the consistency, accuracy and completeness of the electronic standard seal database. 4.7.9 Seal network performance standards See Table 6 for seal network performance indicators. Table 6 Seal network performance indicators National training test management center Network transmission node Whether the node is compatible with nucleic acid fresh chicken sugar t||Network temporary work can be managed cautiously (welcome to the topic sequence self-built process) two knots resist the reality difficult to wash and complex Korean power
Unix service Linvk
equipment has brick disease Qi Shili
Widows.Unix
Fujian all kinds of old styles are available
can be combined
no western manual management house
automatic glue
Windows
Bao Kailin
Wndows】Ueix
string Single node machine, rich manual management, no manual management, no network ... The grade determination is based on the most extreme grade of each performance index as the final grade evaluation result of the industry seal verification system equipment. The grade evaluation index is shown in Table 1. Table 2
5.2 Weak software
According to different performance indicators, the industry seal verification system software is divided into three grades. The first grade is high quality, and the grade evaluation is based on customer performance.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.