This standard specifies the method principle, test preparation, instruments and equipment, operation steps and structure representation of the oxidizability test of dangerous solids. This standard is applicable to the determination of the oxidizability of dangerous solids. GB/T 21617-2008 Test method for oxidizability of dangerous solids GB/T21617-2008 Standard download decompression password: www.bzxz.net
This standard specifies the method principle, test preparation, instruments and equipment, operation steps and structure representation of the oxidizability test of dangerous solids. This standard is applicable to the determination of the oxidizability of dangerous solids.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods: Manual of Tests and Criteria" (4th revised edition), and its degree of consistency is non-equivalent. The relevant technical content of this standard is completely consistent with the above manual, and the standard text format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251). || tt||
The responsible drafting unit of this standard is Jiangsu Entry-Exit Inspection and Quarantine Bureau.
Participating drafting units of this standard are: Sinochem Standardization Research Institute, Beijing Entry-Exit Inspection and Quarantine Bureau, Changzhou Import and Export Industrial and Consumer Products
Safety Testing Center.
Main drafters of this standard are: Tang Lijun, Wang Xiaobing, Xu Siqiao, Mei Jian, Kou Haijuan, Chen Ming, Zhang Junxi.
This standard is formulated for the first time.
The clauses in the following documents become the clauses of this standard through reference in this standard. For all dated referenced documents, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties to the agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated referenced documents, the latest versions are applicable to this standard.
GB6944-2005 Classification and product name numbering of dangerous goods
GB/T15098 Principles for classification of dangerous goods transport packaging
GB19458 General safety regulations for inspection of hazardous characteristics of dangerous goods
United Nations "Recommendations on the Transport of Dangerous Goods: Manual of Tests and Criteria" (Fourth Revised Edition)

IC5 33.300
National Standard of the People's Republic of ChinawwW.bzxz.Net
GB/T 21617----2008
Dangerous goods
Test method for oxidizing properties of solids
Daneerous goots-'lest ethor for oxidizing snlids2008-04-01Published
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
2008-09-01Implementation
Chinese personnel
International wine
Dangerous goodsTest method for oxidizing properties of solids
C1:1 8:417.--2er8
Zhonghuibiao Publishing Co., Ltd. Publishing and Distributing
Beijing Aiyingmenwai Languo Hebei Street Pharmacy
Dushu, 100043
Network cable www,pe, te1.sn
Tel: 0872391668312543
China Standard Publishing Co., Ltd. let Taigao Printing Service print and distribute Xinhua Books in various cities
The first 8X1301, the number of pages 0. Family Number Pingxue
June, the first print cat
2008 edition
Book line: 5066·98 Price 0.00 yuan
If the back printing is wrong, the distribution center of this company will replace the right agent and will investigate
Hot report phone: 1010: 88533533
18/1 21617.-2008
This standard corresponds to the Joint United Nations Technical Standard for the Construction of Dangerous Goods: The revised edition of 2008. It is related to the technical content of this standard and is in full compliance with the revised edition of 2008T1.1200.
This standard is proposed by the National Hazardous Chemicals Management Technical Committee (SACTC251) and is drafted by: China Chemical Research Institute, Beijing Institute of Chemical Technology, entry and exit inspection and quarantine, and European product safety inspection and quarantine enterprises.
The drafters of this standard are: Tang Lijun, Jiazhan, Gei Siqiao, Mei Ting, Kou Hai, Ming, and Zhou Xiang. This standard is formulated for the purpose of copying.
Test method for oxidizing properties of dangerous goods in solid form
G/F 21617---2008
This standard specifies the test method for oxidizing properties of dangerous goods in solid form, including the principles, test preparation, instrumentation and setting, and the installation and handling of hazardous substances.
This standard is applicable to the determination of oxidizing property of dangerous solids. 2. Normative reference documents.
The clauses in the standard are retained by the company for the effective period of this document. They are the applicable documents with all amendments, excluding the new versions of these documents.
GB69:4-20 degree dangerous goods
GE/T15038# chart cargo training list
GB19458 Dangerous goods dangerous goods transport specifications
United States Meijielong goods transport specifications
3 Technical spectrum and definition
C19408 United Nations related regulations
The meaning of the invention is difficult
Chemical substances teaching aizinasun
Handling oxidizing strong I chemical!
taro fiber
fiber length is 50
proposed in the government before, the teaching saw this block reached the visit of the parties to the latest service using a standard soul,
edited version)
in the first volume of the alliance to determine the following technical terms health extension containing a number of oxygen inorganic substances,
image of the following Sheng Shu Shu Shu silk film detection mixed Taiwan] mixtartsahgant tesled I wait for the material energy cellulose is better than the limit compound 3. 4
mixtare substamteested I
test leakage combined physics
carry out the material dry Shu Shu Shu silk ratio of 1: 3. 5
Standard material
Ix high cusa core fFe
The weight ratio of the fiber and the fiber is 3:7. 3.6
Standard fiber
The weight ratio of the fiber and the fiber is 2:3.7
Standard fiber temperature is a mixture of Ter
The weight ratio of the fiber is 1:1 21617--2008
4 Macro principle
The test substance is made into a test material and the test is carried out in a certain period of time, and the combustion properties of the test substance are compared with those of the standard compound to determine the true chemical performance.
5 Micro test preparation
5.1 Preparation of standard substance
Use industrial pure potassium hydroxide as reference substance: The reference substance should be placed in a dry blast cabinet (filled with a solvent) and cooled for at least 12 hours.
tea 2 prepared from fiber shreds
the cellulose is dispersed and the thickness is not large, in 101 explosion difference rice energy (after request h) fragrance quality long explosion device with dry combustion agent) meat directly through cooling can be used, snow water according to the dry child calculation into small ten 5 must summer time should be inserted long explosion time with the original correct water collection tray small 5%
5.3 sample inspection
the inspection intention will use the shape of my love is the fragrance of the words have a small amount of water in advance, the diameter of the inspection point is less than 0u the total quality setting of 1 is good or good, or the old good if the child material is easy to swim, then in the test effect on the whole test Xiang product into a new not in order to follow the smooth installation and transportation of this photography shape particle photography reduction situation remember: 5.4 preparation of temperature gold material|| tt||30.0 long ten more acid instantaneous particle size will be sent to the test before the degree (that is, 3 and the Wei Suo agent made into the test secretion said!, test the compound. Solution of the city point city method is still common women that is, as much as possible business family design, each selected product will be a Yao, as soon as possible from the same good not let say life material single 5.5 preparation of each standard mixture will be
30.08 production, 1 micro-fiber evaluation standard material ritual year fiber home respectively made into a standard mixture 1 standard focus end compound!, year standard compound training, solution of the condensate risk with the machine photography method when the stationary force to think before the color family hidden in the discussion device and equipment
6.1 ignition condensate
temporary power supply connection, and the following alternative increase in the flame line (such as, with?eu 3r em] cms
) diameter 0.8mm20.5mm
electric follow meter 6.0 main 0.6n
1) gold offline energy power 150W-7W. Shape according to Figure 1: 5.2 Sincere inspection
Use a narrow seal example, estimate the self-inspection of the 0 velvet to open the bucket will filter food into the bottom of the home business light 1 wearing care wrong body source of non-diagnostic and low heat plate: the most 1 spot, the magic #m heat rate (when the humidity is 0 it) the core 23·K level is suitable for food, the thermal conductivity of other levels can be used, 6.3 Ventilation zone
end must have a certain degree of exciting wind false air flow velocity for the double-formed small ventilation tree its fast nature of the remote wind zone. The exhaust system will absorb the smoke of the teaching,
medical nutrition body quality secret part of the meaning of a
travel heat metal wire
low thermal conductivity nutrition
7 steps
? , sample effect
test plate and ignition metal wire
/ 23 Mao Xing 2088
science according to the development of national tea
core thinking round healthy full bucket will mix want to do oh bottom has twisted micro-head with the same body, increase in the low thermal conductivity of the request version of the ring shadow ignition metal wire, the flat plate into a small ventilation this, and in the large delivery side, ring spot source 20 main test 7.2 test
.2.1 meaning ignition metal wire connection! If the power source is kept on during the test period, the combustion time of the test image is from the bulb source to the main source! For example, a firebox, a heat lamp or a flameless burner is completed. After the main reaction, the spark is effective and the auxiliary sound should not be considered. If the heat source is kept on during the test period, the spark should not be affected unless the heat source is not affected during the test period. 7.2.3 For the delivery packaged products that are not classified as hazardous products in the C3694120 category, the reference plastics test shall be carried out to verify the results. 8.1.2 The test results are based on the combustion time of the product. 8.2.1 The combustion time of the product containing the product is less than the combustion time of the standard product. 8.2.2.4 1 item: the test value of the mixture or the inspection value of the mixture is not ignited when the test is carried out, or the average ignition time of the mixture is not ignited, or the average ignition time of the mixture is not ignited. The warning of the state of combustion of the large-scale packaging box is: Category: Food Research 150 points S
Copyright Exclusive Uncle Must Pursue
8; 133064 + 131323
08-T 21617-2008
Family Price:
8007-11912 1/10
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.